• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2013

Recently Digital TV industry has drastically been moving the illuminating system, which causes an obvious product change from PDP and LCD to LED model to provide high-definition image. Due to strong competition in the digital industry, TV manufacturers make a great efforts to reduce production cost by using low-priced materials such as steels instead of aluminum and plastic etc. In this paper we have developed a new low-priced electrogalvanized steel sheet, which has a black resin composite layer, to substitute conventional high-priced PCM steel and plastic mold for rear cover panel in the digital TV. The black resin composite was prepared by mechanical dispersion of the mixture solution that consists of high solid polyester resin, melamine hardener, black pigment, micronized silica paste, polyacrylate texturing particle and miscellaneous additives. The composite solution was coated on the steel sheet using roll coater followed by induction furnace curing and cooling. Although the coated layer has a half thickness compared to the conventional PCM steels having $23{\mu}m$ thickness, it exhibits excellent quality for the usage of rear cover panel. The new steel sheet was applied to test products to get quality certification from worldwide electronic appliance customers. Detailed discussion provides in this paper including preparation of composite solution, roll coating technology, induction curing technology and quality evaluation from customers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.235-242
• /
• 2017

Marsupialization and decompression constitute a well-established procedure for treating cavitary bone lesions of the jaw. The technique can be a primary treatment option, especially for pediatric patients with large cysts or lesions involving vital anatomical structures, such as a developing tooth germ. In this procedure, a decompression stent, such as a customized acrylic obturator or space-maintaining appliance, silicone tube, or nasal cannula, is inserted to maintain the patency of the cyst. However, this may cause clinical problems, such as irritation or trauma to the adjacent tissues, as well as discomfort to the patient, or failure of the stent due to cyst shrinkage. It can also be a reason for patient noncompliance. In the cases described here, a minimally invasive marsupialization technique using a metal tube made from a 16-gauge needle was used for odontogenic cysts in pediatric patients associated with unerupted teeth. Through this method, the lesions were removed, with patient cooperation, and the cyst-associated teeth erupted spontaneously.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.115-122
• /
• 2018

Noonan syndrome is characterized by distinctive facial features, short stature, and congenital heart disease. It is a congenital genetic disorder with a prevalence of between 1/1,000 and 1/2,500 in both genders. An 11-year-old boy with Noonan syndrome visited the hospital with an ectopically positioned tooth. A pulmonary stenosis was diagnosed and his growth and development were delayed. In many cases of this diseases there is obvious hemostasis, which he was not experiencing. His facial appearance showed characteristic features of Noonan syndrome. The patient showed a dental class II relationship, labioversion of the upper anterior teeth, and a shallow overbite. Radiographic examination revealed that the upper right canine was ectopically positioned, which led to root resorption of the upper right lateral incisor. A lateral cephalometric radiograph revealed a craniofacial pattern that was within normal limits. Surgical opening and button attachment on the impacted upper right canine were performed and traction was applied on the impacted tooth using a removable appliance. This patient was mildly affected by Noonan syndrome and showed some dental problems. However, few studies have reported the oral characteristics of Noonan syndrome despite its high incidence. Thus, this case report describes the oral features and management of Noonan syndrome.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.147-156
• /
• 1999

Skeletal Cl III malocclusion is an orthopedic appliance mainly used for growing children with maxillary undergrowth, which largely entails skeletal Cl III malocclusion. It improves anterior crossbite and maxillary position and thus, enables patients to attain favorable Profile but often involves unfavorable profile with protrusive upper and lower lips. Therefore, if orthodontists have knowledge of which condition helps obtain favorable occlusion and profile, they are able to predict the prognosis and limitation of the treatment. This study was done in order to help obtain favorable Profile after treating growing skeletal Cl III children. In the study, we classified childern into two groups, the one with favorable profile(Group 1, n=12) and the other with unfavorable profile(Group 2, n=14) and, with retrospective study using pre- and post-treatment lateral cephalogram, drew the following conclusions. 1. As patients had more serious labioversion of upper incisors, they were more unlikely to have favorable profiles after the treatment. Protrusion of prosthion, which was related with maxillary incisors, also affected profiles. 2. As the NL-ML angle before the treatment was small, it was more likely to get favorable profile. 3. As the degree of lower lip protrusion was high, it was likely to have bialveolar protrusion after the treatment. 4. As the degree of downward and backward rotation of mandible was high, it was likely to get unfavorable profile.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.381-389
• /
• 2003

Mutans streptococci is the major causative factor in dental caries. Especially, orthodontic patients with fixed appliance are a risk group for dental caries. Because fixed appliances attached on teeth may change the environment of dental plaque, the enamel decalcification or dental caries around the bracket and band is a major side effect of orthodontic treatmet. The aim of this study was to search plant extracts that have antimicrobial effect on mutans streptococci. Seed-extract of Casia torn were prepared with ethanol and CHMC-2032, the leaf-extracts from Camellia sinensis extract, was obtained extract, 2 type strains and 20 clinical isolates of mutans streptococci isolated from the interface between orthodontic brackets and tooth surfaces in the orthodontic patients were used in this study. The minimal inhibitory concentration of CHMC-2032 was 5mg/ml on the S. mutans KCTC 3065, S. sobrinus KCTC 3088, and 8 clinical isolates of S. sobrinus. However, there was no antibacterial effect of seed-extract of C. tora on mutans streptococci. These data suggest that green tea nay be more effective than the tea Prepared from C tora In the prevention of enamel decalcification or dental caries around brackets.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.775-782
• /
• 1998

The purpose of this study is to investigate the change of the EGFR mRNA expression in the rat gingival epithelium by the experimental tooth movement. We applied reciprocal force between the upper anterior teeth using NiTi open coil spring and stainless steel wire for 1, 2 3, 7 days. For the detection of EGFR mRNA, in situ hybridization was done in the tissue samples which were taken from the pressure and tension sides of teeth. The results were as follows ; 1. The expression of EGFR mRNA was increased application-time dependently. a. Day 1 mild expression on the basal and spinous cell layers b. Day 2 . moderate expression on the whole layers c. Day 3 : severe expression on the basal and spinous cell layers 4. Day 7 severe expression on the whole layers 2. The expression level of EGFR mRNA in the pressure and tension sides were similar during the whole Period of experiment except seven day application at which the cornified layer of the tension side showed moderate expression. 3. Removal of the appliance after 7-day force application lowered the level of EGRF mRNA expression. It was returned to the mild and control (rare) level at three and seven days after the removal, respectively. In conclusion, EFGR mRNA was increased by the experimental tooth movement on the rat ginigval epithelium. Up-regulation of EGFR mRNA in the gingival epithelium can be regarded as responses to the possible changes caused by the physical stersses to the oral environment to maintain the homeostatic conditions of the periodontium.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.2
• /
• pp.116-129
• /
• 2005

Distraction osteogenesis is a new bone formation technique. There is a advantage of the environmental adaptation when distraction force is applied to the gap between osteotomy lines. But it has a disadvantage of long-term wearing of the appliance and long consolidation period. Therefore we make an effort to reduce it and repair normal function. Extracellular matrix proteins have a function to control the cellular growth, migration, shape and metabolism. In these, hyaluronic acid is a member of polysaccharide glycosaminoglycans (GAGs) and has a important function as bone formation and osteoinduction property. Purpose : In this experimental study in rabbit mandibular distraction osteogenesis, we investigated the bone enhancing property of hyaluronic acid and the expression of extracellular proteins such as osteocalcin and osteonectin. Materials and Methods : The experimental study was carried out on 24 Korean male white rabbits (both mandibular body, n=48). Distraction group was divided to distraction experimental (A, n=16) and distraction control (B, n=16) by the application of hyaluronic acid (Hyruan, LGCI, Seoul, Korea). Normal control group (C, n=16) was only osteotomized. After 5 days latency, distraction devices were activated at a rate of 1.4 mm per day (0.7 mm every 12hours) for 3.5 days. Animals were sacrificed at postoperative 3, 7, 14, and 28 days. H&E stain and immunohistochemical stain was done on decalcified section. Additionally RT-PCR analysis was done for the identification of the expression of osteocalcin and osteonectin. Results : The bone formation in distraction experimental group was much more than that in distraction and normal control group at postoperative 28 days. In immunohistochemical stain, osteocalcin was enhanced at only postoperative 14 days, but osteonectin was not different at each post-operation days. In RT-PCR analysis, osteocalcin was not different at each post-operation days, but osteonectin was strongly expressed in distraction experimental group at postoperative 7 days. The expression of osteocalcin and osteonectin was elevated during the healing period. Conclusion : We found the good bone formation ability of hyaluronic acid in distraction osteogenesis through the immunohistochemistry and RTPCR analysis to osteocalcin and osteonectin, known as a bone formation marker. The application of hyaluronic acid in distraction osteogenesis is a method to reduce the consolidation period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.323-330
• /
• 1999

It is well recognized that a cross-bite tends to occur more frequently among Japanese, Chinese and Koreans more than among Europeans. A variety of functional appliances have already invented for the treatment of cross-bites. One of them is the FR III(by Rolf $Fr\ddot{a}nkel$) which applies a quite different philosophy based on the using vestibular region compared with other methods which utilize muscular forces applied directly on the teeth. The FR III also increases both the lack of muscular tension against the dental arch and the dentition and muscular forces which can then influence the teeth indirectly. This mechanism can achieve favorable developments with the basal bone, teeth, and alveolar bone. After using FR III to the anterior cross-bite patient with the eruption of a maxillary incisor the results were as follows: 1. Forward growth of maxilla and proclination of the upper incisor 2. Downward and backward rotation of the mandible 3. Increase the facial height 4. The case which was normal mandible, underdevelopmental maxilla, deeper overbite and more nagative overjet exhibited good prognosis

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.293-300
• /
• 2012

In case of treating the functional type of anterior cross bite, removing the cause in early stage prevents from turning to skeletal type, leads to perform normal function, and has improved facial appearance. Functional Regulator III (FR III), one kind of the Functional regulator(FR)s suggested by R$\ddot{o}$lf Fr$\ddot{a}$nkel in 1966, applied to patients with the functional and skeletal anterior crossbite in early mixed, and permanent dentition. This appliance improves unbalanced power condition by blocking abnormal muscle-power effect, so that normal growth can be expected. In this case report, favorable results were obtained by selecting clinical cases of children in their early mixed dentition with functional cross bite. 1. FR IIIs were applied to patients with anterior crossbite for 5~6 months. Anterior crossbite patients were corrected favorably, nevertheless they didn't show any horizontal skeletal-changes by buccal shields. 2. Normal occlusion and esthetic facial contour were achieved from dental movement of maxillary and mandibular anterior teeth while the mandible rotates to posterior and inferior direction.