• Title/Summary/Keyword: apparent viscosity

Search Result 338, Processing Time 0.021 seconds

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro-Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing (젖음성 시험과 전기-미세역학 시험법과 통한 단 카본섬유/산처리된 CNT-에폭시 나노복합재료의 분산과 자체-감지능)

  • Jang, Jung-Hoon;Wang, Zuo-Jia;GnidaKouong, Joel;Gu, Ga-Young;Park, Joung-Man;Lee, Woo-Il;Park, Jong-Kyoo
    • Journal of Adhesion and Interface
    • /
    • v.10 no.2
    • /
    • pp.90-97
    • /
    • 2009
  • Dispersion and self-sensing evaluation for single-carbon fiber reinforced in three different acid-treated CNT-epoxy nanocomposites were investigated by electro-micromechanical techniques and wettability tests. Self-sensing based on contact resistivity exhibited more noise for single carbon fiber/acid-treated CNT-epoxy composites than it did for untreated CNT. However, the apparent modulus was higher the acid treated case than the untreated case which is attributed to better stress transfer. The interfacial shear strength (IFSS) between carbon fibers and the CNT-epoxy was lower than that between carbon fiber and neat epoxy due to the increased viscosity associated with the addition of the CNT. The CNT-epoxy nanocomposite exhibited more hydrophobicity than did neat epoxy. Change in the thermodynamic work of adhesion was consistent with changes in the IFSS but disproportional to that of the apparent modulus. The optimum condition of acid treatment on the need can be obtained instead of the maximum condition.

  • PDF

Rheological Properties of Cross-Linked Potato Starch (가교화 감자전분의 유변학적 특성)

  • Choi, Moonkyeung;Heo, Hye Mi;Jin, Yong-Ik;Chang, Dong-Chil;Kim, Misook;Lee, Youngseung;Chang, Yoon Hyuk
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.45 no.10
    • /
    • pp.1525-1531
    • /
    • 2016
  • The objective of the present study was to investigate the rheological properties of potato starch cross-linked with different concentrations (0, 0.125, 0.25, and 0.5%, w/v) of cross-linking agents (10 g of adipic acid and 40 g of acetic anhydride). Cross-linked potato starch dispersions showed shear-thinning behaviors (n=0.43~0.63) at $25^{\circ}C$. Apparent viscosity (${\eta}_{a,100}$), consistency index (K), and yield stress (${\sigma}_{oc}$) significantly increased with an increase in the concentrations of cross-linking agents from 0.125 to 0.5% (w/v). Storage modulus (G') and loss modulus (G'') increased, whereas complex viscosity (${\eta}^*$) was reduced with increasing frequency (${\omega}$) from 0.63 to 62.8 rad/s. Magnitudes of G' and G'' for cross-linked potato starch were significantly increased with an elevation in the concentrations of cross-linking agents. G' values of cross-linked potato starches were significantly higher than G'', indicating that the starches had more elastic properties than viscous properties. Cox-Merz rule was not applicable to potato starch dispersions.

Effects of Extracting and Drying Method on Physical Properties of Alginates from Sea Tangle, Laminaria japonica (추출 및 건조방법이 다시마 (Laminaria japonica) 알긴산의 물성에 미치는 영향)

  • YOU Byeong Jin;LIM Yeong Seon
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.36 no.4
    • /
    • pp.340-345
    • /
    • 2003
  • In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

Scaleup of Electrolytic Reactors in Pyroprocessing (Pyroprocessing 공정에 사용되는 전해반응장치의 규모 확대)

  • Yoo, Jae-Hyung;Kim, Jeong-Guk;Lee, Han-Soo
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.7 no.4
    • /
    • pp.237-242
    • /
    • 2009
  • In the pyroprocessing of spent nuclear fuels, fuel materials are recovered by electrochemical reactions on the surface of electrodes as well as stirring the electrolyte in electrolytic cells such as electrorefiner, electroreducer and electrowinner. The system with this equipment should first be scaled-up in order to commercialize the pyroprocessing. So in this study, the scale-up for those electrolytic cells was studied to design a large-scale system which can be employed in a commercial process in the future. Basically the dimensions of both electrolytic cells and electrodes should be enlarged on the basis of the geometrical similarity. Then the criterion of constant power input per unit volume, characterizing the fluid behavior in the cells, was introduced in this study and a calculation process based on trial-and-error methode was derived, which makes it possible to seek a proper speed of agitation in the electrolytic cells. Consequently examples of scale-up for an arbitrary small scale system were shown when the criterion of constant power input per unit volume and another criterion of constant impeller tip speed were respectively applied.

  • PDF

Study on the Manufacturing of Chitosan Using Krill(Euphausia superba Dana) and Quality Characteristics (크릴을 이용한 키토산 제조 및 품질 특성)

  • Do, Jeong-Ryong;Park, In-Sung;Rhee, Seong-Kap;Kim, Dong-Soo
    • Applied Biological Chemistry
    • /
    • v.43 no.4
    • /
    • pp.309-313
    • /
    • 2000
  • For the use of Antartic krill(Euphausia superba Dana) as food resource, general composition, extracting condition of chitin and quality characteristics of chitosan were investigated. General composition of frozen krill(Euphausia superba Dana) was consisted of moisture 79.0%, protein 13.1%, lipid 4.0%, VBN 7.7mg%, ash 2.7%, others 1.2% and that of dried krill powder was moisture 5.6%, protein 56.1%, lipid 18.8%, ash 11.4%, others 8.1%. The condition of chitin extraction from krill powder was treated with 1N NaOH at $40^{\circ}C$ for removing protein, 1N HCl for excepting mineral substances and methanol for decoloring. The yield of chitin by new procedure developed was 3.7%. The composition of extracted chitin contents was moisture 7.1%, ash 0.4%, protein 3.5%, lipid 3.1%. The results of degree of deacetylation in chitosan at 50% NaOH, $121^{\circ}C$, for 2 hrs was showed 82%. At the same alkali concentration and reaction concentration, a longer reaction time gave a decreased degree of deacetylation. The apparant viscosity was 0.09241 Pa in 1% chitosan from krill and 0.13826 Pa in standard chitosan.

  • PDF

Effects of Guar Gum on Quality of Soft Tofu Stew Sauce (Guar Gum이 순두부찌개 소스의 품질 특성에 미치는 영향)

  • Im, Pureum;Han, Jin-Hee;Kim, Young-Choul;Lee, Bora;Kim, Mi-Young;Chang, Yoonhyuk;Yu, Sungyul;Lee, Youngseung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.44 no.3
    • /
    • pp.442-448
    • /
    • 2015
  • The aim of this study was to investigate the effects of guar gum on the rheological behaviors, sensory attributes, and consumer acceptability of soft tofu stew sauce. Five different soft tofu stew sauces were commercially manufactured with various levels of guar gum (0.0, 0.1, 0.2, 0.4, and 0.5%). Twelve sensory attributes of the stew sauces were identified by nine trained descriptive panelists, whereas hedonic levels of the stew sauces were assessed by a group of 51 consumers. Steady flow of the stew sauces were measured by a rheometer. Significant differences were observed in terms of sensory saltiness and viscosity among the products. For the consumer test, 0.1% guar gum-added product was most liked by consumers. Partial least square regression showed sensory shellfish, green onion, and shrimp flavors to be key factors affecting overall acceptability for the stew sauces. For rheological behaviors, 0.0, 0.1, and 0.2% guar gum-added products showed newtonian behaviors ($R^2$=0.99 by power law model), whereas 0.4 and 0.5% products followed pseudoplastic behaviors ($R^2$=0.99 by power law model). Based on the established equivalence table using rheological and consumer data, smaller than 0.0114 ($Pa{\cdot}s$) of the apparent viscosity should be necessary to guarantee 'slightly like' category in a consumer hedonic test. It seems that addition of guar gum not only influenced rheological properties but overall acceptability for the stew sauces.

Effect of Various Gums on Flow Properties and Yield Stress of Korean Sweet Potato Starch (여러 종류의 검 첨가가 국내산 고구마전분의 유동특성 및 Vane 항복응력에 미치는 영향)

  • Choi, Hye-Mi;Yoo, Byoung-Seung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.38 no.9
    • /
    • pp.1253-1257
    • /
    • 2009
  • The effects of seven commercial gums (xanthan gum, guar gum, pectin, gum arabic, gellan, locust bean gum, and sodium alginate) at different concentrations (0, 0.3, and 0.6%) on flow properties of sweet potato starch (SPS) pastes were investigated. Flow behavior characteristics were adequately described by power law flow model, and yield stress was also measured by vane method. SPS-gum mixtures (5% w/w) at $25^{\circ}C$ were found to have high shear-thinning flow behavior with yield stress, and their consistency index (K) and apparent viscosity ($\eta_{a,100}$) increased with elevated gum concentration, except for pectin and sodium alginate. Vane yield stress ($\sigma_o$) value of SPS-pectin mixture was lower when compared to other mixtures while that of SPS-gellan mixture was much higher. Most of the gums, except for pectin, gum arabic, and sodium alginate, showed a synergistic effect on the elastic properties of SPS-gum mixtures. In general, the flow properties of SPS-gum mixtures appeared to be strongly influenced by the addition of gum, and dependent on the type and concentration of gum.

Thermal and physiochemical properties of faba bean (Vicia faba L.) flour and starch (Faba bean 가루 및 녹말의 열역학적 특성과 물리화학적 특성)

  • Kim, Hui-Yun;Choi, Yohan;Jo, Eun-Jeong;Baik, Moo-Yeol;Choi, Hyun-Wook
    • Korean Journal of Food Science and Technology
    • /
    • v.52 no.4
    • /
    • pp.409-414
    • /
    • 2020
  • In this study, we conducted a physiochemical property analysis using commercial faba bean flour (CFBF), faba bean flour (FBF), and faba bean starch (FBS). We observed that the FBS granules were elliptical and cracked on the surface. Moreover, FBS showed significantly lower solubility and apparent viscosity than FBF and CFBF. With respect to the pasting properties, FBS exhibited a peak viscosity of 1349.3 cP at 94.8℃ and a breakdown of 42.7 cP, whereas FBF and CFBF displayed no pasting properties. The FBS gelatinization enthalpy (12.9 J/g) was relatively high compared with the values obtained for FBF and CFBF (5.9 and 4.6 J/g, respectively). The FBS X-ray diffraction patterns showed a C-type pattern with peaks at diffraction angle (2θ) of 5.9°, 15.2°, 17.3°, and 23.1°, which were the same in FBF and CFBF with relatively low peak intensity. These results represent basic data for using faba bean as a food material.

Effects of α-Galactosidase Supplementation on Performance and Energy Metabolism for Broilers Fed Corn-non-dehulled Soybean Meal Diets

  • Zhang, Bo;Cao, Yunhe;Chen, Yiqun;Li, Yihang;Qiao, Shiyan;Ma, Yongxi
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.23 no.10
    • /
    • pp.1340-1347
    • /
    • 2010
  • To study the effects of ${\alpha}$-galactosidase (${\alpha}$-Gal) supplementation on performance and energy metabolism, 216 Arbor Acres male broilers were placed in 36 cages of 6 birds each and allotted to 4 diets for 42 d, with 0-21 d as starter period and 22-42 d as grower period. The 4 diets were based on corn non-dehulled soybean meal in a $2{\times}2$ factorial arrangement, with 2 levels of ${\alpha}$-Gal (0 vs. 60 U/kg feed) and 2 levels of ME (normal metabolizable energy (NME) and low metabolizable energy (LME)). Bird performance was obtained at 21 and 42 d of age with samples of feces collected for nutrient digestibility from 19-21 d and 40-42 d. At 21 and 42 d, 1 bird from 6 cages of each treatment was killed to determine liver weight, intestinal pH and chyme viscosity. With the addition of ${\alpha}$-Gal the 42 d body weight (BW) and 0-42 d average daily gain (ADG) were significantly improved (p<0.05). Average daily feed intake (ADFI) of birds fed the LME diet was significantly increased compared to those fed the NME diet during starter (p<0.01) and grower (p<0.05) periods and overall (p<0.01). There was an interaction of ${\alpha}-Gal{\times}ME$ on 0-21 d ADFI (p<0.01). Supplementation of ${\alpha}$-Gal significantly improved (p<0.01) feed efficiency during the grower period and overall. Feed efficiency of birds fed the LME diet was significantly decreased (p<0.05) compared to those fed the NME diet during the starter period and overall. With the addition of ${\alpha}$-Gal apparent metabolizable energy (AME) was improved (p<0.01) by 2.1% and 1.8% during starter and grower periods, respectively. There was a main effect (p<0.05) of ${\alpha}$-Gal on the digestion of neutral detergent fiber (NDF) during the starter period and crude protein (CP), NDF and acid detergent fiber (ADF) during the grower period. With the addition of ${\alpha}$-Gal, the relative weight of liver was reduced (p<0.01) during the two phases. The duodenal and jejunal pH were significantly decreased (p<0.01) with the supplementation of ${\alpha}$at the two phases. ${\alpha}$-Gal addition reduced (p<0.01) chyme viscosity of the ileum during the starter and grower periods. Overall, ${\alpha}$-Gal showed a major effect on nutrient efficiency, improved ADG and feed efficiency, whereas LME decreased feed efficiency. The incorporation of ${\alpha}$-Gal into a LME diet could at least partially offset ME deficiency of non-dehulled soybean meal.

Influence of Addition of Membrane-Filtered Powder of Sunmul on the Quality Characteristics of Yogurt (막분리한 두부순물 농축분말첨가가 요구르트의 품질에 미치는 영향)

  • Jung, Jin-Young;Chung, Hai-Jung;Kim, Woo-Jung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.10
    • /
    • pp.1579-1585
    • /
    • 2005
  • The aim of this study was to propose utilization of tofu whey concentrates separated by ultrafiltration (UF) for yogurt production. The curd yogurt was prepared from whole milk added with skim milk Powder in which UF powder was substituted 0$\%$, 6.25$\%$, 12.5$\%$ or 25$\%$ for skim milk powder. The quality characteristics of yogurt in terms of pH, titratable acidity, viscosity, color and viable cell counts were evaluated. There were no significant differences in pH and titratable acidity between control (yogurt added with only skim milk powder) and yogurt added with UF powder after 24 hr of fermentation at 37$^{\circ}C$. Apparent viscosity of yogurt added with UF powder was lower (2,623 $\∼$ 3,189 cps) than that of the control yogurt (3,196 cps). Lightness and redness value of yogurt added with UF powder were not significantly different from control yogurt, while yellowness value increased as the amount of UF powder increased. Addition of UF powder stimulated the growth of lactic acid bacteria. Gas chromatographic analysis detected acetaldehyde, diacetyl, and organic acids, and more volatile compounds were detected in yogurt added with UF powder. Sensory analysis showed that yogurt added with UF powder were evaluated as acceptable as control yogurt. Therefore, UF powder could be substituted for skim milk powder without depressing yogurt qualify.