• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제24권1호
• /
• pp.29-45
• /
• 1996

Before (March 26, 1994) or after the occurrence of a downslope windstorm (March 29), the NO, $NO_2$, and $SO_2$ at the ground level of Kangnung city were monitored with high concentrations in the afternoon, due to a large amount of gases emitted from combustion of motor vehicle and heating apparatus, especially near 1600-1800 LST and 2000-2100 LST, but at night, they had low concentrations, resulting from small consumptions of vehicle and heating fuels. When both moderate westerly synoptic-scale winds flow over Mt. Taegwallyang and easterly meso-scale sea breeze during the day, atmospheric pollutants should be trapped by two different wind systems, resulting in higher concentration at Kangnung city in the afternoon. At night, the association of westerly synoptic wind and land breeze can produce relatively strong winds and the dissipation by the winds cause these low concentrations to lower and lower, as nightime goes on. From March 27 through 28, an enforced localized windstorm could be produced along the lee side of the mountain near Kangnung, generating westerly internal gravity waves with hydraulic jump motions. Sea breeze toward inland appartantly confines to the bottom of the eastern side of the mountain, due to the interruption of eastward violent internal gravity waves. As the windstorm moves down toward the ground, an encountering point of two opposite winds approaches Kangnung, and a great amount of NO and $NO_2$ were removed by the strong surface winds. Thus, their maximum concentrations are found to be near 18 and 20 LST, 17 and 21 LST. In the nighttime, the more developed storm should produce very strong surface winds and the NO and $NO_2$ could be easily dissipated into other place. The $SO_2$ concentration had no maximum value, that is, almost constant one all day long, due to its removal by the strong surface winds. Especially, the CO concentrations were slightly lower during the strom period than both before or after the strom, but they were nearly constant without much changes during the during the daytime and nighttime.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1559-1570
• /
• 2008

A new grouting material named 3S is developed that can be used effectively for reinforcing cut surface of weathered rock in processing of tunneling. The new material is composed of mostly micro slag cement and general Portland cement, but the material is foundered again upto $8,000\;cm^2/g$ of specific area so that it can be easily infiltrated in to the ground. For verifying technical and engineering quality of the material several laboratory tests with specially designed test apparatus were performed including compression tests, infiltration tests and resonant column tests. It was verified that the newly developed grouting material at early age of 1 or 3 days generates 200~1500% higher compressive strength and 400~560% larger elastic modulus than those of the LW(LW-1) or micro-cement(LW-2) grouting materials in the market. In addition, the new 3S grouting material could be so easily infiltrated into the model ground in the lab tests that it produces 4 times larger grouted roots in average compared to the usual water glass type grouting material(LW-1). Thus, it can be said that the newly developed grouting material can effectively prevent inflow water into tunnel compared to LW grouting materials.

• 수산경영론집
• /
• 제29권1호
• /
• pp.27-63
• /
• 1998

This paper focuses on the history of fisheries finance in Korea, especially the role of fisheries finance after the establishments of korean fisheries cooperative. We can say that our fisheries was influenced greatly by the fisheries finance. It may be preyed by the facts that our fisheries experienced a great growth right after the input of big fisheries finance. The products of fisheries has increased from 1962 to now And the structure of the fisheries has improved. But there were unequal development in the each sectors of fisheries. Though the deep sea fishery and farming has developed faster, coastal fishing that are absorbing nearly 90% of fisheries population has stagnated. Of course it was because of unequal financial assistance by Authority. So to improve fisheries evenly, it is very important to overcome various problems that have encountered including the new circumstances like the WTO. For this, lots of steps should be taken. They can be summarized as follows. 1) It may be inevitable to see a rising costs in the deep sea fishery because of the declaration of EEZ by almost every nation. 2) So coastal fishing should be getting more important. It is necessary to improve the structure of coastal fishing and we should be ready to prepare various alternatives far self-sustained growth in coastal fishing. 3) Especially fisheries finance should play more active role. 4) Self-sustainable growth means a fishery with full compatability. For full compatability it is necessary to give financial supports far making fishing ground and equipping anti-pollution system and labour saving apparatus etc. 5) Also to raise the ratio of self-support in fisheries products it is necessary to give financial support to traditional financial system. 6) Moreover it is necessary to guide utilization of finance supplied. For this the committee that is consists of professional people in that field is strongly asked. This committee should be entitled to decide and coordinate the selection of projects, allocation of finance, method of utilization and evaluation of projects etc.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
• /
• pp.261-282
• /
• 1987

Plants store a significant amount of their nitrogen, sulfur and carbon reserves as storage proteins in seed tissues. The major proteins present in rice seeds are the glutelins. Glutelins are initially synthesized at 4-6 days postanthesis and deposited into protein bodies via Golgi apparatus. Based on nucleic acid sequences and Southern blot analysis, the three isolated glutelin genomic clones were representative members of three gene subfamilies each containing 5 to 8 copies. A comparison of DNA sequences displayed by relevant regions of these genomic clones showed that two subfamilies, represented by clones, Gt1 and Gt2, were closely, related and probably evolved by more recent gene duplication events. The 5' flanking and coding sequences of Gt1 and Gt2 displayed at least 87% homolgy. In contrast, Gt3 showed little or no homolgy in the 5' flanking sequences upstream of the putative CAAT boxes and exhibited significant divergence in all other portions of the gene. Conserved sequences in the 5' flanking regions of these genes were identified and discussed in light of their potential regulatory role. The derived primary sequences of all three glutelin genomic clones showed significant homology to the legume 11S storage proteins indicating a common gene origin. A comparison of the derived glutelin primary sequences showed that mutations were clustered in three peptide regions. One peptide region corresponded to the highly rautable hypervariable region of legume peptide region of legume 11S storage proteins, a potential target area for protein modification. Expression studies indicated that glutelin mRNA transcripts are differentially accumulated during endosperm development. Promoterss of Gt2 and Gt3 were functional as they direct transient expression of chloramphenicol acetyltransferase in cultured plant cell.

• 복식문화연구
• /
• 제19권1호
• /
• pp.31-41
• /
• 2011

Jacket is popular ready-made garment among college students in their early 20s. However, ready-made jackets, which are designed to fit normal people, are not likely to fit sportsmen well who have highly developed muscles in particular parts of their bodies. And muscle development is quite different among sportsmen according to the types of sports and bodily movements. Therefore, ready-made jackets can not be expected to fit sportsmen well as they fit normal people who have different shapes of bodies from sportsmen. The purpose of this study is to investigate the factors of fitness and comfortableness of jackets for sportsmen in their early 20s according to the types of sports to provide basic data for designing suitable garments for them. Research method, 362 college sportsmen in their early 20s were surveyed from June 2nd 2009 to June 9th 2009, and 360 of them were processed statistically, with 2 of them having been discarded for lack of sincerity. Among Taekwondo players, Arm Length was the most complained part, among wrestlers, Biacromion Length was the most complained part, among fencers, 'Waist Circumference' was the most complained part, among swimmers, Biacromion Length was the most complained part, among apparatus gymnast, 'Hip Circumference' was the most complained part, among track athletes and handball players, more than 20% answered that the jackets did not fit them in every parts. It was understood that different sportsmen complained of particular parts of the jackets and that parts of the jacket should be adjusted according to bodily shapes of different sportsmen. This study was made to investigate the factors to be considered in producing ready-made jackets for college sportsmen. It is hoped that more patterns will be developed on the basis of the original form of jacket and the result of this study.

• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.257-264
• /
• 2013

In Canada Deuterium Uranium (CANDU)-type nuclear power plants, the reactor is composed of 380 fuel channels and refueling is performed on one or two channels per day. At the time of refueling, the fluid force of the cooling water inside the channel is exploited. New fuel added upstream of the fuel channel is moved downstream by the fluid force of the cooling water, and the used fuel is pushed out. Through this process, refueling is completed. Among the 380 fuel channels, outer rows 1 and 2 (called the FARE channel) make the process of using only the internal fluid force impossible because of the low flow rate of the channel cooling water. Therefore, a Flow Assist Ram Extension (FARE) tool, a refueling aid, is used to refuel these channels in order to compensate for the insufficient fluid force. The FARE tool causes flow resistance, thus allowing the fuel to be moved down with the flow of cooling water. Although the existing FARE tool can perform refueling in Korean plants, the coolant flow rate is reduced to below 80% of the normal flow for some time during refueling. A Flow rate below 80% of the normal flow cause low flow rate alarm signal in the plant operation. A flow rate below 80% of the normal flow may cause difficulties in the plant operation because of the increase in the coolant temperature of the channel. A new and improved FARE tool is needed to address the limitations of the existing FARE tool. In this study, we identified the cause of the low flow phenomena of the existing FARE tool. A new and improved FARE tool has been designed and manufactured. The improved FARE tool has been tested many times using laboratory test apparatus and was redesigned until satisfactory results were obtained. In order to confirm the performance of the improved FARE tool in a real plant, the final design FARE tool was tested at Wolsong Nuclear Power Plant Unit 2. The test was carried out successfully and the low flow rate alarm signal was eliminated during refueling. Several additional improved FARE tools have been manufactured. These improved FARE tools are currently being used for Korean CANDU plant refueling.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.331-343
• /
• 2005

연료전지와 수소를 사용하는 연료전지 자동차의 상용화를 위해서는 수소 공급용 수소 스테이션(hydrogen station)의 개발이 중요한 핵심 기반기술이다. 일반적으로 수소 스테이션은 탈황반응, 개질반응(reforming), 수성가스전환(WGS) 반응 및 수소분리(PSA) 장치로 구성된 수소제조 공정과 압축, 저장 및 분배 장치로 구성된 후처리(post-treatment) 공정으로 구성되어 있다. 본 총설에서는 수소 경제(hydrogen economy) 사회로의 진입을 위해 국내외에서 연구개발 중인 수소 스테이션에 대한 연구 개발 동향과 전망을 고찰하였다. 그리고 향후 풍력 및 태양열 등 재생 가능 에너지(renewable energy)원으로부터 물의 분해에 의한 수소제조 기술이 확립되기 전까지는 화석연료의 개질 반응이 수소를 제조하는 핵심기술이 될 것으로 판단된다. 따라서 화석연료의 탈황반응, 화석연료의 개질 반응에 의한 수소제조, CO 농도 저감을 위한 수성가스 전환반응 및 수소의 분리기술 등 수소 스테이션의 상용화에 필수적인 단위공정개발에 대한 최근의 연구동향을 정리하였다.

• 한국한의학연구원논문집
• /
• 제17권2호
• /
• pp.115-120
• /
• 2011

Objectives : The purpose of this study is to develop an apparatus which can take a facial image by self-operated capturing technique. The user can obtain one's facial image immediately after adjusting facial tilt and focusing distance. The system has been designed for classifying Sasang typology based on facial image. Methods : The system is composed of a Webcam, one-way glass mirror and mini LCD. The Webcam takes a facial image which is displayed on the mini LCD. Then the user can see and adjust to the right position in the real time through the image mirror-reflected from the mini LCD. The optical sensor is used to estimate the proper focusing distance. To verify the performance of the system, 11 characteristic points on the facial image are used and compared with high performance DSLR camera(D700) by applying the coefficient of variance and Bland-Altman Plot. Results : The developed system and D700 show enough agreement with the small coefficient of variance to analyse constitutional types with a facial im mage. However, the result of Bland-Altman plot shows that the width parameters have distortions owing to short focusing distance. Conclusions : The system is expected to be utilized on u-healthcare services for home environment after improving the distortion in the width parameters.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.119-131
• /
• 2014

본 연구에서는 광역 부지나 현장 접근성이 용이하지 않은 현장의 지반조사를 신속 정확하게 수행하기 위한 목적으로 해외에서 널리 사용되고 있는 동적 콘 관입시험기를 개선한 개량형 동적 콘 관입시험기를 개발하였다. 기존의 동적 콘 관입시험기의 장점인 휴대성, 간단한 시험방법 등은 그대로 반영하는 한편, 하부 로트의 결합 연장을 통하여 기존 시험기의 지반 관입심도 1m에서 6m까지 관입되도록 고안하였다. 또한, 해머(2+3+3kg), 콘(3type) 등의 조합으로 독일식/일본식 간이 동적 콘 관입시험기(Tsukuba, PWRI, SH type)와 동일한 제원으로 시험이 가능하며, 심도가 깊어짐에 따라 시험 결과에 영향을 미치는 수직도를 확보할 수 있도록 보조 장치를 적용시켰다. 이렇게 개발 제작한 개량형 동적 콘 관입시험기의 적용성을 평가하기 위하여 국내/외 현장의 다양한 지반에 대하여 시험을 수행하여 그 신뢰성을 확보하였다.