• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.293-304
• /
• 2011

The purpose of this study was to investigate the displacement and pattern of stress distribution on periodontal ligaments of maxillary first and second molar, and on orthodontic mini-implant (OMI) surface, according to three different insertion angles to the bone surface of OMI using Dragon helix appliance, which is a newly introduced scissors-bite correcting appliance. OMI were placed between second premolar and first molar with three different insertion angles (45, 60, 90 degrees). Displacement and maximum stress distribution area (MSDA) were analyzed by finite element analysis. When the insertion angle to the alveolar bone surface was 90 degrees, maxillary first and second molar both exhibited MSDA at the palatal root apex. Maxillary first molar did not show any significant displacement, while the second molar exhibited intrusive and palatal displacement. On the OMI, as the insertion angle decreased, the MSDA shifted towards the tip, and the amount of displacement had increased. When the OMI was inserted at a 90 degree angle, anchor loss was minimized and scissors-bite correcting effect was maximized.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2010

To assess the stress distribution of implant prosthesis induced by intentional misfit using photoelastic model. Stress was measured at the surrounding bone after applying vertical load to the implant. Three implants were placed in each of three photoelastic resin blocks. No misfits were used for the control group, while for the experimental group $100{\mu}m$ misfit after cutting the crown was used. The photoelastic stress analysis was performed. In control group, stress concentration was not shown when the load was not applied, whereas stress concentration was shown only in the loaded part even when load was applied and the stress was distributed in anterior-posterior direction when applying a load in the middle. When intentional misfits were given, stress around the fixture was incurred when tightening the screw even if load was not applied. If the load was applied, stress was concentrated around the implants including areas where the load was applied. In particular, the prosthesis made of UCLA showed more stress concentration as compared with a conical abutment. In the UCLA case, concentration was shown from the apex following through the axis to the cervical area. Prosthesis with misfit makes the stress concentrated though the load was not applied and it induces even more severe stress concentration when the load was applied. This founding demonstrates the importance of the correct prosthesis production.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.9-13
• /
• 1965

Powdery mildew of Ailanthus altissima Sw. was first reported by J.S. Park in Korea, 1961. According to his report, this disease was found on the leaves of this tree species collected in Jeongup, 1957, and in Taejon, 1958. He described morphological characters of this pathogen and described also that the causal fungus may be closely related with Phyllactinia corylea. This disease which appears dusty grayish yellow molds under surface of leaves was collected again by the author in Kwangju, 1962. The present works were undertaken to make clear the species of causal fungus by means of the morphology and pathogenecity. According to the following results, the pathogen was identified as Phyllactinia corylea (Pers.) Karst. Morphological characters of the fungus Mycelia persistent or more or less evanescent; matured conidia solitary, aseptate, short-clavate to clavate to clavate, hyaline or yellowish, granulate, $44.6-89.2{\times}9.3-24.2{\mu}$, average $64.8-17.8{\mu}$ in size; conidiophores elongate clavate or columnar, hyaline, 2-3 septate, $122.8-346.0{\times}3.7-7.4{\mu}$, average $208.8{\times}6.3{\mu}$; per-thecia usually scattered, rarely gregarious, dark brown to black, depressed globose to globose, $223.2-297.6{\mu}$, average $267.8{\mu}$ in diameter; appendages 12-19, usually 15 in number, hyaline, straight, needle-shaped, sharply pointed at the apex and bulbous at the base, aseptate, $93.0-310.0{\times}5.0-8.0{\mu}$, average $173.3{\times}6.4{\mu}$ in size; asci elongate ellipsoidal to broadly clavate, hyaline, more or less stalked, 8-13 in number, $68.5-76.6{\times}26.1-34.2{\mu}$, average $71.4{\times}29.0{\mu}$ in size; ascospores 2-4, usually 2 in number, hyaline or yellowish, aseptate, ellipsoidal or ovate, $27.7-34.2{\times}14.7-17.9{\mu}$, average $25.5{\times}13.9{\mu}$ in size. Pathogenicity of the fungi In order to make clear the species of the fungus and the pathogenic differences of Phyllactinia fungi which are collected around the contaminated area and seemed to be related to Ailanthus powdery mildew, some inoculation experiments were performed. 1. Cross inoculation to several tree species with their pathogen: Tested materials; Phyllactinia in question on Ailanthus altissima Sw. Ph. fraxini (DC.) Homma. On Alnus firma S. et Z. Ph. moricola (P. Henn.) Homma on morus alba L. According to the results of the experiments, the reactions were all negative with the exception of the original hosts of tested fungi. 2. Inoculation to Picrasma ailanthoides Planch. : The appearance of symptom on the leaves of P. ailanthoides is not distinct, but more or less mycelial growth. Therefore, under the optimal condition in glass chamber, it may be possible to success artificially.

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.7-17
• /
• 2007

The left main descending artery (LMDA) of left coronary artery (LCA) in rats runs around the left side of conus arteriosus after arising from the aortic sinus and descends to the apex of heart with branching several branches into the wall of left ventricle (LV). The ligation site of LMDA for myocardial infarction (MI) is the 2~4 mm from LCA origin, between the pulmonary trunk and left auricle. The characteristics that rat heart has no interventricular groove on the surface and its coronary arteries run intramyocardially with branching several branches give the difficulty in surgery for MI which resulted in expected size. This study was aimed to elucidate the branching patterns of the left coronary artery for analysis of MI size and for giving the basic data to producing small MI intentionally in 2 male species that are widely used, Sprague-Dowley (SD) and Wistar-Kyoto (WKY), in the world. Red latex casting was followed by the microdissection in 27 and 28 hearts of SD and WKY male rats, respectively. The branching patterns of LMDA were classified into 3 major types and others based on the left ventricular branches (L). The Type I, Type II, Type III and others are shown in 55.6%, 22.2%, 14.8%, and 7.4% in SD, 60.7%, 10.7%, 7.1%, and 21.5% in WKY, respectively. The branching number of the first left ventricular branch (L1) that are distribute the upper one third of LV was 1.2~1.5, and its branching sites were ranging 0.9~2.1 ᒠfrom LCA origin. L2, the second left ventricular branch distributing middle one third of LV, was the number of 1.2~1.4 and branching out ranging 5.1~5.7 mm. L3, the third left ventricular branch of LMDA distributing lower one third of LV, was the number of 1~1.5 and branching out ranging 7.0~9.3 mm from LCA origin. The common branch of L1 and L2 was branched from LMDA with the number of 1.1, and its site was located in the distance of mean of 1.5 mm and 2.8 mm in SD and WKY, respectively. The common branch of L2 and L3 was branched from LMDA with the number of 1, and its site was located in the distance of mean of 7.2 mm and 2.9 mm in SD and WKY, respectively. The right ventricular branches (R) of LMDA were short and branched in irregularly compared with L. The number of 1~4 of R were branched from LMDA. With regarding to the distribution area of L and the ligation site for MI, moderate MI (25~35% of LV) might be resulted in 70.4% and 60.7% in SD and WKY rats. Small MI might be produced intentionally if the ligation would be located at the 4~6 mm from LCA origin in the left side of LMDA. These data wold be helpful to expect the size of MI and to reproduce of small MI, intentionally, in rat hearts.

• Research in Plant Disease
• /
• v.8 no.1
• /
• pp.55-58
• /
• 2002

In July 2001, rotting and shivering flowers of cotton rose (Hibiscus mutabitis) were fecund in the flower beds along the roadsides in Jinju area. The disease first started as water-soaking, dark-green lesions on the petals, and then whole flower was rotted rapidly, Whitish mycelia and monosporous sporangiophore with monosporous sporangiola were formed abundantly on the lesions. Colony appeared as white to pale yellowish brown mycelia on potato dextrose agar medium (PDA). Monosporous sporangiophore was long slender and branched at the apex, each branch bearing a head of sporangiospores. Sporangium was subglobose in shape and was 42.6-114.2$\mu$m in size. Monosporous sporangiola were elliptic, fusiform or ovoid, and brown in color and 12.3~21.6 $\times$8.3~11.6$\mu$m Um in size. Sporangiospores were elliptic, fusiform or ovoid in shape, dark brown or brown in color and 16.3~23.8$\times$8.2~13.6$\mu$m in size, and they had three or more appendages at bipolar end. Zygospores were mostly globose, dark black colored and sized was 46.2-78.4$\mu$min diameter, The fungus grew on PDA between at 15 to 4$0^{\circ}C$, and the optimum temperature was 3$0^{\circ}C$. This is the first report on the flower rot of cotton rose caused by C. cucurbitarum in Korea.

• Journal of Periodontal and Implant Science
• /
• v.42 no.5
• /
• pp.173-178
• /
• 2012

Purpose: The main purpose of this study was to investigate bone thickness on the buccal and palatal aspects of the maxillary canine and premolars using cone-beam computed tomography (CBCT). The differences between left- and right-side measurements and between males and females were also analyzed. Methods: The sample consisted of 20 subjects (9 males and 11 females; mean age, $21.9{\pm}3.0$) selected from the normal occlusion sample data in the Department of Orthodontics, The Catholic University of Korea. The thickness of the buccal and palatal bone walls, perpendicular to the long axis of the root were evaluated at 3 mm and 5 mm apical to cemento-enamel junction (CEJ) and at root apex. Results: At the canines and first premolars regions, mean buccal bone thickness of at 3 mm and 5 mm apical to CEJ were less than 2 mm. In contrast, at the second premolar region, mean buccal bone thickness at 3 mm and 5 mm apical from CEJ were greater than 2 mm. Frequency of thick bone wall (${\geq}2mm$) increased from the canine to the second premolar. Conclusions: This result should be considered before tooth extraction and planning of rehabilitation in the canine and premolar area of maxilla. Careful preoperative analysis with CBCT may be beneficial to assess local risk factors and to achieve high predictability of success in implant therapy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.450-454
• /
• 2002

Laceration of soft palate and oropharynx is relatively common in children. Soft palate laceration has been reported patients of all ages, ranging from new born to geriatric patients. However, young children often place objects their mouth, they may fall on the object or receive a direct force on the object which then perforates the soft palate tissue. Most frequently affected site is the left supra-tonsillar area. Lesions are predominately in the soft palate with-out perforation. Linear and superficial wounds are frequent. A typical injury is the flat- U-, or V-shaped with apex directed anteriorly. In those cases without any through-and-through lacerations or any tissue loss, suture is not necessary. Furthermore, suture of the affected site may hinder wound healing. Healing of the wound should be complete by three weeks with minimal scarring. There have been reports of carotid artery injury due to soft palate laceration causing neurologic complications. For such reasons, traumatized child must be in close observation for 2-3days, and if symptoms of complication are noticed consultation with oromaxillofacial surgeons, E.N.T., or neurologist is required. These are two reports of boys 2 and 3 years of age who had soft palate laceration caused by a falling-down-in jury with an object in their mouth. They were treated non-surgically and neurologic evaluation was carried out for 1 week with complete healing.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.45-51
• /
• 1999

The purpose of this study is to investigate the effects of various factors in keratotomy for astigmatism correction on surgical outcomes by finite element method as well as animal experiments. Three kinds of surgical techniques were mechanically investigated : arcuate, straight, and inverse arcuate keratotomy. Among the three techniques the arcuate keratotomy is the most popular one while the other two techniques are being investigated in this area. The arcuate keratotomy was found to be more controllable and effective in reducing the refractive power than the others. In arcuate keratotomy it was found most effective when the incision was located in the middle position between the apex and the edge of the cornea from the results of experiment as well as finite element study. Regarding to the range of the corneal incision in arcuate keratotomy, the incision angle of 90$^{\circ}$ was found th be most effective in reducing refractive power than other angles even it was incised up to 150$^{\circ}$. Therefore, it was concluded that 90$^{\circ}$ of incision angle results in the largest decrease in refractive power in arcuate keratotomy. However, other important findings were that the effect of the surgery decreased with time so the visco-effect of the cornea and auto-healing process. Therefore, these factors should be considered in future studies.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.372-380
• /
• 1999

The purpose of this study was to investigate the distribution of calcitonin gene-related peptide(CGRP) containing nerve fivers after pulp exposure in rats. The Spague-Dawley rats weighing about 250 - 300g were used. The animals were devided into normal control group and experimental groups. Experimental animals were sacrified on 2, 4, 7, 10 days after pulp exposure. The maxillary teeth and alveolar bone were removed and immersed in the 4% paraformaldehyde plus 0.1M phosphate buffer (pH 7.4). Serial frozen $50{\mu}m$ thick sections were cut with a cryostat. In the immunohistochemical staining procedure, the rabbit CGRP antibody was used as a primary antibody. The sections were incubated for 48 hours at $4^{\circ}C$, and placed into biotinylated anti-rabbit IgG as a secondary antibody and incubated in ABC (avidin-biotin complex), The sections were visualized by 0.05% 3.3 diaminobenzidine tetrahydrochloride. The results of this study were as follows: 1. In control group, CGRP containing nerve fibers ran parallel to the long axis of root and reached the coronal pulp. They were distributed on Raschkow plexus under the odontoblastic layer. 2. In 2 day group after pulp exposure, tissue necrosis and acute inflammation occurred and CGRP containing nerve fibers increased. In 4 day group, the necrotic tissue extended to the pulp and CGRP containing nerve fibers were distributed around the inflammation zone. 3. In 7 day group after pulp exposure, pulp necrosis occurred, and in 10 day group, the abscess under the necrotic pulp extended to the root apex area and CGRP containing nerve fibers were not observed in root canals. 4.The sprouting of CGRP nerve fibers was most remarkable at the pulp chamber under injury in 4 day group, and it was found at inflammation zone under the necrotic tissue in 7 day group and the remaining root pulp tissue in 10 day group. As mentioned above, CGRP nerve fibers had a tendency to increase around the inflammatory zone, especially around the acute inflammation tissue, when compared with control group. It is suggested that CGRP nerve fibers maybe related to the control of inflammatory response of pulp tissue.