• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.429-438
• /
• 2014

This study was designed to investigate the effects on anti-oxidative activities and increasing extraction yield of Aralia elata Cortex by gamma irradiation. Electron spin resonance (ESR) analysis as physical techniques for irradiation identification of Aralia elata showed that a pair of peak appeared on a space of 6.0 mT at the left and right of symmetric unspecific central ESR spectrums, confirming that the plant was gamma-irradiated. The optimum extracting conditions for preparing gamma irradiated samples from Aralia elata Cortex were to extract with 50% ethanol for 15 hrs after 10 kGy irradiation. DPPH scavenging activity and ABTS radical cation inhibitory activity of the water and 50% ethanol extracts from non irradiated and irradiated Aralia elata Cortex was very high as over 80% and 98%, respectively, at tested low concentration of $50{\mu}g/mL$. Antioxidant protection factor (PF) as anti-oxidation indicator of lipophilic compounds showed a very high level of activity as 2.18~2.78 PF. As for TBARs, water and ethanol extracts showed high level. Increase of TBARs inhibitory activity of water extracts was not shown by gamma-ray irradiation but ethanol extracts showed slight increasement of TBARs inhibitory activity with 10 kGy gamma-ray irradiation. These results shown confirmed increasement of extraction yield for phenolic compounds and anti-oxidative activity from Aralia elata. Thus, the treatment of gamma-irradiation can be used a way to amplify a solubility for biological active compounds and anti-oxidative activity in plants.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.71-81
• /
• 2008

This paper proposes a spectral element which can represent dynamic responses in high frequency domain such as Lamb waves on a thin plate. A two layer beam model under 2-D plane strain condition is introduced to simulate high-frequency dynamic responses induced by piezoelectric layer (PZT layer) bonded on a base plate. In the two layer beam model, a PZT layer is assumed to be rigidly bonded on a base beam. Mindlin-Herrmann and Timoshenko beam theories are employed to represent the first symmetric and anti-symmetric Lamb wave modes on a base plate, respectively. The Bernoulli beam theory and 1-D linear piezoelectricity are used to model the electro-mechanical behavior of a PZT layer. The equations of motions of a two layer beam model are derived through Hamilton's principle. The necessary boundary conditions associated with electro mechanical properties of a PZT layer are formulated in the context of dual functions of a PZT layer as an actuator and a sensor. General spectral shape functions of response field and the associated boundary conditions are formulated through equations of motions converted into frequency domain. A detailed spectrum element formulation for composing the dynamic stiffness matrix of a two layer beam model is presented as well. The validity of the proposed spectral element is demonstrated through comparison results with the conventional 2-D FEM and the previously developed spectral elements.

• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.473-484
• /
• 2018

Free vibration of cross-ply laminated plates using a higher-order shear deformation theory is studied. The arbitrary number of layers is oriented in symmetric and anti-symmetric manners. The plate kinematics are based on higher-order shear deformation theory (HSDT) and the vibrational behaviour of multi-layered plates are analysed under simply supported boundary conditions. The differential equations are obtained in terms of displacement and rotational functions by substituting the stress-strain relations and strain-displacement relations in the governing equations and separable method is adopted for these functions to get a set of ordinary differential equations in term of single variable, which are coupled. These displacement and rotational functions are approximated using cubic and quantic splines which results in to the system of algebraic equations with unknown spline coefficients. Incurring the boundary conditions with the algebraic equations, a generalized eigen value problem is obtained. This eigen value problem is solved numerically to find the eigen frequency parameter and associated eigenvectors which are the spline coefficients.The material properties of Kevlar-49/epoxy, Graphite/Epoxy and E-glass epoxy are used to show the parametric effects of the plates aspect ratio, side-to-thickness ratio, stacking sequence, number of lamina and ply orientations on the frequency parameter of the plate. The current results are verified with those results obtained in the previous work and the new results are presented in tables and graphs.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.397-405
• /
• 2014

A shear-flexible beam element is presented for the flexural analysis of laminated composite T-beams with arbitrary lay-ups. Based on the first-order shear deformable beam theory, the derived element takes into account warping shear deformation and all coupling coming from material anisotropy. Three different types of beam elements, namely, the two-noded, three-noded, and four-noded beam elements with seven degree-of-freedom per node are developed to solve governing equations. To demonstrate the versatility and accuracy of the beam element formulated, numerical results are performed for symmetric and anti-symmetric angle-ply composite T-beams under the uniformly distributed and concentrated load. The effects of fiber angle and shear deformation are investigated for different laminated stacking sequence. The quadratic and cubic elements are shown to be applicable to the flexural analysis of composite T-beams.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1157-1169
• /
• 2008

This paper presents spectral element formulation which approximates Lamb wave propagation by PZT transducers bonded on a thin plate. A two layer beam model under 2-D plane strain condition is introduced to simulate high-frequency dynamic responses induced by a piezoelectric (PZT) layer rigidly bonded on a base plate. Mindlin-Herrmann and Timoshenko beam theories are employed to represent the first symmetric and anti-symmetric Lamb wave modes on a base plate, respectively. The Euler-Bernoulli beam theory and 1-D linear piezoelectricity are used to model the electro-mechanical behavior of a PZT layer. The equations of motions of a two layer beam model are derived through Hamilton's principle. The necessary boundary conditions associated with the electro-mechanical properties of a PZT layer are formulated in the context of dual functions of a PZT layer as an actuator and a sensor. General spectral shape functions of response field and the associated boundary conditions are obtained through equations of motions converted into frequency domain. Detailed spectrum element formulation for composing the dynamic stiffness matrix of a two layer beam model is presented as well. The validity of the proposed spectral element is demonstrated through numerical examples.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.80-87
• /
• 2006

Recently, the distribution and using of the digital multimedia contents are easy by developing the internet application program and related technology. However, the digital signal is easily duplicated and the duplicates have the same quality compare with original digital signal. To solve this problem, there is the multimedia fingerprint which is studied for the protection of copyright. Fingerprinting scheme is a techniques which supports copyright protection to track redistributors of electronic inform on using cryptographic techniques. Only regular user can know the inserted fingerprint data in fingerprinting schemes differ from a symmetric/asymmetric scheme and the scheme guarantee an anonymous before recontributed data. In this paper, we present a new scheme which is the detection of colluded multimedia fingerprint by neural network. This proposed scheme is consists of the anti-collusion code generation and the neural network for the error correction. Anti-collusion code based on BIBD(Balanced Incomplete Block Design) was made 100% collusion code detection rate about the average linear collusion attack, and the hopfield neural network using (n,k)code designing for the error bits correction confirmed that can correct error within 2bits.

• Journal of Yeungnam Medical Science
• /
• v.32 no.2
• /
• pp.127-131
• /
• 2015

Churg-Strauss syndrome (CSS) is a necrotizing vasculitis with extra-, peri-vascular eosinophilic infiltration. Chronic symmetric polyarthritis with the presence of rheumatoid factor (RF) and anti-cyclic citrullinated peptide antibody are the mainstay of rheumatoid arthritis (RA) diagnosis. Mononeuritis multiplex is a peripheral neuropathy involving more than 2 separate nerve areas. A 62-year-old male patient was referred for left foot drop and polyarthritis of both hands and feet for 4 months. During evaluation, mononeuritis multiplex was detected on nerve conduction study and electromyography tests: vasculitis with neutrophil, eosinophil, and lymphocyte infiltration on peroneal nerve biopsy. A positive response to methacholin and bronchodilator was observed on the pulmonary function test. Radiologic tests showed peri-articular soft tissue swelling and osteopenia on both hand and foot. Marked peripheral eosinophilia, high RF, and positive perinuclear anti-neutrophil cytoplasmic antibody were detected on blood tests. Here, we report on a patient with overlap syndrome of CSS and RA with review of the relevant literature, from which a few references to overlap syndrome of CSS and RA were available.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.68-75
• /
• 2006

Multimedia fingerprinting protects multimedia content from illegal redistribution by uniquely marking every copy of the content distributed to each user. Differ from a symmetric/asymmetric scheme, fingerprinting schemes, only regular user can know the inserted fingerprint data and the scheme guarantee an anonymous before recontributed data. In this paper, we present a scheme which is the algorithm using LDPC(Low Density Parity Check) for detection of colluded multimedia fingerprint and correcting errors. This proposed scheme is consists of the LDPC block, Hopfield Network and the algorithm of anti-collusion code generation. Anti-collusion code based on BIBD(Balanced Incomplete Block Design) was made 100% collusion code detection rate about the linear collusion attack(average, AND and OR) and LD% block for the error bits correction confirmed that can correct error until AWGN 0dB.

• Steel and Composite Structures
• /
• v.19 no.1
• /
• pp.93-110
• /
• 2015

The thermomechanical bending response of anti-symmetric cross-ply composite plates is investigated by the use of the simple four variable sinusoidal plate theory. The theory accounts for sinusoidal distribution of transverse shear stress, and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate without using shear correction factor. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations for the present theory is reduced, significantly facilitating engineering analysis. The validity of the present theory is demonstrated by comparison with solutions available in the literature. Numerical results are presented to demonstrate the behavior of the system. The influences of aspect ratio, side-to-thickness ratio, thermal expansion coefficients ratio and stacking sequence on the thermally induced response are studied. The present study is relevant to aerospace, chemical process and nuclear engineering structures which may be subjected to intense thermal loads.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.35-44
• /
• 2007

In this study was made the flutter analysis for the export model of Firefly(Bandi-ho), the small canard aircraft. Stiffness model based on internal load generation finite element model was generated. Mass model based on the weight DB for weight control was generated. Aerodynamic model based on Doublet Lattice Method was generated. Preliminary flutter analysis was made. Based on it, major vibration modes are identified and experimentally obtained via the ground vibration test. The obtained normal mode frequencies were used to correlate the finite element model. Flutter analysis was made again and major flutter mechanisms were summarized. The most important flutter root was identified as a coupled root between rigid body roll mode and anti-symmetric wing pitching mode.