• IE interfaces
• /
• v.21 no.3
• /
• pp.254-261
• /
• 2008

Connected-(r,s)-out of-(m,n) : F system is an important topic in redundancy design of the complex system reliability and it's maintenance policy. Previous studies applied Monte Carlo simulation and genetic, simulated annealing algorithms to tackle the difficulty of maintenance policy problem. These algorithms suggested most suitable maintenance cycle to optimize maintenance pattern of connected-(r,s)-out of-(m,n) : F system. However, genetic algorithm is required long execution time relatively and simulated annealing has improved computational time but rather poor solutions. In this paper, we propose the ant colony optimization approach for connected-(r,s)-out of-(m,n) : F system that determines maintenance cycle and minimum unit cost. Computational results prove that ant colony optimization algorithm is superior to genetic algorithm, simulated annealing and tabu search in both execution time and quality of solution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.71-82
• /
• 2004

Recently, network model inspired by social insect behavior attracts the public attention. The AntNet is an adaptive and distributed routing algorithm using mobile agents, called ants, that mimic the activities of social insect. In this paper. we present a new hardware architecture to realize an AntNet-based routing in practical system on a chip application. The modified AntNet algorithm for hardware implementation is compared with the original algorithm on the various traffic patterns and topologies. Implementation results show that the proposed architecture is suitable and efficient to realize adaptive routing based on the AntNet.

• Journal of Microbiology
• /
• v.40 no.3
• /
• pp.205-210
• /
• 2002

To study interactions between $C_{4}$-dicarboxylic acid transport protein D and E$\sigma$$^{54}$ in the dctA promoter regulatory region, we used the challenge phage system. An ant＇-｀lac fusion was recombined onto the challenge phage, and this ant＇-｀lac fusion along with Pant and the R. meliloti dctA promoter regulatory region were cloned onto a plasmid. The plasmid bearing the ant＇-｀lac fusion was used as a reporter plasmid in a coupled transcription-translation system. Addition of purified $\sigma$$^{54}$ to the coupled system specifically repressed transcription of the plasmid-borne ant＇-｀lac fusion. When DCTD was added along with $\sigma$$^{54}$ to the coupled system, transcription of the ant＇-｀lac fusion was even further repressed, suggesting that DCTD may stabilize closed complexes between E$\sigma$$^{54}$ and the dctA promoter.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.185-194
• /
• 2008

The objective of this paper is to design the dynamic route guidance system(DRGS) and develop an ant algorithm based on routing mechanism for finding the multiple shortest paths within limited time in real traffic network. The proposed ant algorithm finds a collection of paths between source and destination considering turn-restrictions, U-turn, and P-turn until an acceptable solution is reached. This method can consider traffic constraints easily comparing to the conventional shortest paths algorithms.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.40-50
• /
• 2008

The problem of assigning customers to satellite channels is a difficult combinatorial optimization problem and is NP-complete. For this combinatorial optimization problem, standard optimization methods take a large computation time and so genetic algorithms (GA) and ant colony optimization (ACO) can be used to obtain the best and/or optimal assignment of customers to satellite channels. In this paper, we present a comparative study of GA and ACO to this problem. Various issues related to genetic algorithms approach to this problem, such as solution representation, selection methods, genetic operators and repair of invalid solutions are presented. We also discuss an ACO for this problem. In ACO methodology, three strategies, ACO with only ranking, ACO with only max-min ant system (MMAS), and ACO with both ranking and MMAS, are considered. A comparison of these two approaches (i,e., GA and ACO) with the standard optimization method is presented to show the advantages of these approaches in terms of computation time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.29-38
• /
• 2005

In this paper, a new modified and optimized AntNet algorithm which can be implemented efficiently onto network processor is proposed. The AntNet that mimics the activities of the social insect is an adaptive agent-based routing algorithm. This method requires a complex arithmetic calculating system. However, since network processors have simple arithmetic units for a packet processing, it is very difficult to implement the original AntNet algorithm on network processors. Therefore, the proposed AntNet algorithm is a solution of this problem by decreasing arithmetic executing cycles for calculating a reinforcement value without loss of the adaptive performance. The results of the simulations show that the proposed algorithm is more suitable and efficient than the original AntNet algorithm for commercial network processors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.79-81
• /
• 2001

그래프 착색 문제(Graph Coloring Problem)는 인접한 노드 (V$_{i}$, V$_{j}$ )가 같은 색을 갖지 않도록 그래프 G의 노드 V에 색을 배정하는 문제로, NP-hard 문제로 잘 알려져 있다. 또한 최근까지 그래프 착색 문제의 최적 해를 구하기 위하여 다양한 접근방식들과 해법들이 제안되고 있다. 본 논문에서는 기존의 그래프 착색 문제의 해법으로 잘 알려진 Greedy algorithms, Simulated Annealing. Tabu search 등이 아닌 실세계에서 개미들이 자신의 분비물을 이용하여 경로를 찾는 Ant System을 개선하여 새롭게 제안한 Ant Colony System(ACS) 알고리즘으로 해를 구하는 ANTCOL을 소개하고, ANTCOL에서 DSATUR, Recursive Largest First(RLF) 등의 방식을 사용한 기존 생성 함수들과 RLF를 개선하여 제안한 eXtend RLF방식을 사용한 생성 함수를 비교, 평가하고자 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.4
• /
• pp.38-45
• /
• 2003

This paper presents a meta-heuristic solution technique, Ant System (AS)algerian to solve edge detection problem. We define the quality of edge in terms of dissimilarity, continuity, thickness and length. We cast edge detection as a problem in cost minimization. This is achieved by the formulation of a cost function that inversely evaluates the quality of edge configuration. Twelve windows for enhancing dissimilarity regions based on the valid edge structures are used. The AS algorithm finds the optimal set of edge pixels based on the cost function. The experimental results show that the properly reduced set of edge pixels could be found regardless how complicated the image is.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.373-379
• /
• 2012

Disruptions in manufacturing systems caused by system changes and disturbances such as the tool wear, machine breakdown, malfunction of transporter, and so on, reduce the productivity and the increase of downtime and manufacturing cost. In order to cope with these challenges, a new method to build an intelligent manufacturing system with biological principles, namely an ant colony inspired manufacturing system, is presented. In the developed system, the manufacturing system is considered as a swarm of cognitive agents where work-pieces, machines and transporters are controlled by the corresponding cognitive agent. The system reacts to disturbances autonomously based on the algorithm of each autonomous entity or the cooperation with them. To develop the ant colony inspired manufacturing system, the disturbances happened in the machining shop of a transmission case were analyzed to classify them and to find out the corresponding management methods. The system architecture with the autonomous characteristics was generated with the cognitive agent and the ant colony technology. A test bed was implemented to prove the functionality of the developed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1031-1033
• /
• 2005

This paper presents a system of handwritten numerals recognition, which is based on Ant-miner algorithm (data mining based on Ant colony optimization). At the beginning, three distinct fractures (also called attributes) of each numeral are extracted. The attributes are Loop zones, End points, and Feature codes. After these data are extracted, the attributes are in the form of attribute = value (eg. End point10 = true). The extraction is started by dividing the numeral into 12 zones. The numbers 1-12 are referenced for each zone. The possible values of Loop zone attribute in each zone are "true" and "false". The meaning of "true" is that the zone contains the loop of the numeral. The Endpoint attribute being "true" means that this zone contains the end point of the numeral. There are 24 attributes now. The Feature code attribute tells us how many lines of a numeral are passed by the referenced line. There are 7 referenced lines used in this experiment. The total attributes are 31. All attributes are used for construction of the classification rules by the Ant-miner algorithm in order to classify 10 numerals. The Ant-miner algorithm is adapted with a little change in this experiment for a better recognition rate. The results showed the system can recognize all of the training set (a thousand items of data from 50 people). When the unseen data is tested from 10 people, the recognition rate is 98 %.