• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.10
• /
• pp.59-66
• /
• 1993

PZT thin film deposited by rf magnetron sputtering was annealed by rapid thermal process(RTP) in PbO ambient to prevent vaporing of Pb and interface reactions. Si and TiN/Ti/Si substrates were prepared to survey application of TiN/Ti layer which can prevent interface interaction with Si and crack of PZT thin films. As temperature increased. PZT thin films surface on Si substrate appeared more severe cracks which should affect electrical properties deadly. TiN/Ti(40-150${\mu}{\Omega}{\cdot}cm$) layer applied for buffer layer suppressed interface interaction and film cracking. The measured leakage current(LC) and breakdown voltage(BV) of PZT thin film on TiN/Ti/Si substrate annealed at 650$^{\circ}$C for 15 sec (thickness of 2500$\AA$) were 38 nA/cm2 and 3.5 MV/cm and dielectric constant was 310 at 1 MHz, and remanent polarization (Pr) and coercive field (Ec) were 6.4${\mu}C/cm^{2}$ and 0.2MV/cm at 60 Hz, respectively.

• The Korean Journal of Ceramics
• /
• v.2 no.1
• /
• pp.43-47
• /
• 1996

$RuO_2$ thin films deposited directly on Si substrate by RF magnetron sputtering method using $RuO_2$ target have been investigated. Special interest was focused on the effect of process parameter on the surface roughness of $RuO_2$ films. Crystallization behavior and electrical properties of the films deposited at $300^{\circ}C$ were superior to those deposited at room temperature. Metallic Ru phase was formed in pure Ar and this phase had resulted poor adhesion after post annealing process in oxidizing ambient. Microstructural analysis reveals that the size of the $RuO_2$ crystallites gets smaller and the surface becomes smoother as the $O_2$ partial pressure or film thickness decreases. Irrespective of the $O_2/Ar$ ratio, resistivity of $RuO_2$ films ranged in $50~70 {\mu}{\Omega}-cm$. As the film thickness decreases, there is a thickness where the resistivity rises abruptly. Such an onset thickness turned out to be dependent n the $O_2$/Ar ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.362-365
• /
• 2002

Hf thin films were deposited on bottom metal using a RF magnetron sputtering method followed by oxidation and annealing in O$_2$ and N$_2$ ambient, respectively. Various top metal electrodes (i.e., Al, Au, and Cu) were deposited by evaporation, and their roles on physical and electrical properties were investigated. Using the XRD, SEM and AFM techniques, we confirmed that the grain size of HfO$_2$ thin films enlarges as a function of oxidation temperature, increasing dielectric constant. However, other electrical properties (e.g., tan) deteriorateas a consequence. The dielectric constant and tan of HfO$_2$ thin films oxidized at 500 $^{\circ}C$ were 17-25 and 3${\times}$10-3 - 2x10-2, respectively, in the frequency range of 1 Hz to 1 MHz. The leakage current density was less than 1${\times}$10-8A/cm2 up to 0.7 MV/cm. In addition, electrical properties of HfO$_2$ thin films (e.g., the dielectric constant, leakage current and tan $\delta$) depend on top metal electrode. We showed that Al top metal electrode results in the best result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.288-291
• /
• 2002

Application of metal silicides such as TiSi$_2$ and CoSi$_2$ as contacts and gate electrodes are being studied. However, TiSi$_2$ due to the linewidth-dependance, and CoSi$_2$ due to the excessive Si consumption during silicidation cannot be applied to the deep-submicron MOSFET device. NiSi shows no such problems and can be formed at the low temperature. But, NiSi shows thermal instability. In this investigation, NiSi was formed with a Ti-capping layer to improve the thermal stability. Ni and Ti films were deposited by the thermal evaporator. The samples were then annealed in the N$_2$ ambient at 300-800$^{\circ}C$ in a RTA (rapid thermal annealing) system. Four point probe, FESEM, and AES were used to study the thermal properties of Ti-capped NiSi layers. The Ti-capped NiSi was stable up to 700$^{\circ}C$ for 100 sec. RTA, while the uncapped NiSi layers showed high sheet resistance after 600$^{\circ}C$. The AES results revealed that the Ni diffusion further into the Si substrate was retarded by the capping layer, resulting in the suppression of agglomeration of NiSi films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1033-1036
• /
• 2004

Si nanocrystallites thin films on p-type (100) Si substrate have been fabricated by pulsed laser deposition using a Nd:YAG laser. After deposition, samples were annealed at the temperatures of 400 to $800^{\circ}C$. Hydrogen passivation was then performed in the forming gas (95% $N_2$ + 5% $H_2$) for 1 hr. Strong violet-indigo photoluminescence has been observed at room temperature from nitrogen ambient-annealed Si nanocrystallites. The variation of photoluminescence (PL) Properties of Si nanocrystallites thin films has been investigated depending on annealing temperatures with hydrogen passivation. From the results of PL, Fourier transform infrared (FTIR), and high-resolution transmission electron microscopy (HRTEM) measurements, it is observed that the origin of violet-indigo PL from the nanocrystalline silicon in the silicon oxide film is related to the quantum size effect of Si nanocrystallites and oxygen vacancies in the SiOx(x : 1.6-1.8) matrix affects the emission intensity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.115-116
• /
• 2008

The ferroelectric vinylidene fluoride-trifluoroethylene ($VF_2$-TrFE) and $Al_2O_3$ passivation layer for the Metal/Insulator/Ferroelectric/Semiconductor (MIFS) structure were deposited using spin coating and remote plasma atomic layer deposition (RPALD), respectively. A 2.5 ~ 3 wt % diluted solution of purified vinylidene fluoride-trifluoroethylene ($VF_2$: TrFE=70:30) in a DMF solution were prepared and deposited on silicon wafer at a optimized spin speed. After annealing in a vacuum ambient at 150 ~ $200^{\circ}C$ for 60 min, upper insulator layer were deposited at temperature ranging from 100 ~ $150^{\circ}C$ by RPALD. We described electrical and structural properties of MIFS fabricated by spin coating and RPALD methods.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.68-76
• /
• 1992

Concurrent Junction process (simultaneous formation of a silicide and a junction on the implanted substrate) by Rapid Thermal Annealig has been investigated. Electrical and material properties of CoSi$_2$ films were analyzed with Alpha Step, 4-point probe, X-ray diffraction(XRD) and Scanning Electron Microscope(SEM). And CoSi$_2$ junctions were examined with Spreading Resistance probe in order to see the redistribution of electrically activated dopants and determined the junction depth. Two step annealing process, which was 80$0^{\circ}C$ for 30sec and 100$0^{\circ}C$ for 30sec in NS12T ambient was employed to form CoSi$_2$ and shallow junctions. Resistivity of CoSi$_2$ was turned out to be 11-15${\mu}$cm and shallow junctions less than 0.1$\mu$m were successfully formed by the process. It was found that the dopant concentration at CoSi$_2$/Si interface increased as decreasing the thickness of Co films in case of $p^{+}/n$ and $n^{+}/p$ junctions while the junction depth decreased as increasing CoSiS12T thickness in case of $p^{+}/n$ junction.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.840-846
• /
• 1991

In case of the rapid thermal process by halogen lamps, an optical pyrometer is generally used to measure the temperature. It is, however, necessary to measure the temperature by the thermocouple when the process temperature is lower than 700$^{\circ}C$ and the correction of the temperature is required. Contact by the PdAg paste is commonly used out but in this case it is impossible to see the effect of surface states of the substrate, which is critical in the rapid thermal process. In this study, real temperature ramping speed of silicon substrates coveredwith various thin films such as SiO$_2$2, Si$_{3}N_{4}$, dopants, and conductive layers (Ti or Co) was investigated by a mechanical contact of the thermocouple. And the results were compared with the case in which the contact was made by the PdAg paste. Effect of process ambient was also studied. It was found that depending on the surface state, overshoot more than 100$^{\circ}C$ could occur. It was also found that in case of the substrate covered with conductive layers, mechanical contact might render the correct temperature.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.6-8
• /
• 2005

The optical and electrical properties of indium tin oxide (ITO) thin films deposited at room temperature can be substantially enhanced by adopting a two-step process. In the first step, the films (50 nm thick) were grown by pulsed laser deposition (PLD) on glass substrate at room temperature and quickly annealed at $400^{\circ}C$ in nitrogen ambient for 1 minute by using rapid thermal annealing method. The process was completed by additional deposition (150 nm thick) on annealed film at room temperature. High quality ITO films grown by two-step process at room temperature could be obtained with the resistivity of $3.02{\times}10^{-4}{\Omega}cm$, the carrier mobility of 32.07 $cm^2/Vs$, and the transparency above 90 % in visible region mainly due to the enhancement of the film crystallinity and the increase of grain size.