• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.237-242
• /
• 2016

Objective: The purpose of this study was to compare the joint movements and muscle activities of novices according to pedal type (flat, clip, and cleat pedal). Method: Nine novice male subjects (age: $24.4{\pm}1.9years$, height: $1.77{\pm}0.05m$, weight: $72.4{\pm}7.6kg$, shoe size: $267.20{\pm}7.50mm$) participated in 3-minute, 60-rpm cycle pedaling tests with the same load and cadence. Each of the subject's saddle height was determined by the $155^{\circ}$ knee flexion angle when the pedal crank was at the 6 o'clock position ($25^{\circ}$ knee angle method). The muscle activities of the vastus lateralis, tibialis anterior, biceps femoris, and gastrocnemius medialis were compared by using electromyography during 4 pedaling phases (phase 1: $330{\sim}30^{\circ}$, phase 2: $30{\sim}150^{\circ}$, phase 3: $150{\sim}210^{\circ}$, and phase 4: $210{\sim}330^{\circ}$). Results: The knee joint movement (range of motion) and maximum dorsiflexion angle of the ankle joint with the flat pedal were larger than those of the clip and cleat pedals. The maximum plantarflexion timing with the flat and clip pedals was faster than that of the flat pedal. Electromyography revealed that the vastus lateralis muscle activity with the flat pedal was greater than that with the clip and cleat pedals. Conclusion: With the clip and cleat pedals, the joint movements were limited but the muscle activities were more effective than that with the flat pedal. The novice cannot benefit from the clip and cleat pedals regardless of their pull-up pedaling advantage. Therefore, the novice should perform the skilled pulling-up pedaling exercise in order to benefit from the clip and cleat pedals in terms of pedaling performance.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.161-173
• /
• 2005

Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and closed stance. The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to open stance patterns during forehand stroke in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVlEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head angle were defined 1. In three dimensional maximum linear velocity of racket head the X axis showed $11.41{\pm}5.27m/s$ at impact, not the Y axis(horizontal direction) and the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. the stance distance between right foot and left foot was mean $74.2{\pm}11.2m$. 2. The three dimensional anatomical angular displacement of shoulder joint showed most important role in forehand stroke. and is followed by wrist joints, in addition the movement of elbow joints showed least to the stroke. The three dimensional anatomical angular displacement of racket increased flexion/abduction angle until the impact. after impact, The angular displacement of racket changed motion direction as extension/adduction. 3. The three dimensional anatomical angular displacement of trunk in flexion-extension showed extension all around the forehand stroke. The angular displacement of trunk in adduction-abduction showed abduction at the backswing top and adduction around impact. while there is no significant internal-external rotation 4. The three dimensional anatomical angular displacement of hip joint and knee joint increased extension angle after minimum of knee joint angle in the forehand stroke, The three dimensional anatomical angular displacement of ankle joint showed plantar flexion, internal rotation and eversion in forehand stroke. it could be suggest that the plantar pressure of open stance during forehand stroke would be distributed more largely to the fore foot. and lateral side.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.593-605
• /
• 2022

The purpose of this study is to investigate the personalized treacmill exercise analysis using a smart mirror based on Kinect sensor. To evaluate the performance of the development system, 10 health males were used to measure the range of the hip joint, knee joint, and ankle joint using a smart mirror when walking on a treadmill. For the validity and reliability of the development system, the validity and reliability were analyzed by comparing the human movement data measured by the Kinect sensor with the human movement data measured by the infrared motion capture device. As a result of validity verification, the correlation coefficient r=0.871~0.919 showed a high positive correlation, and through linear regression analysis, the validity of the smart mirror system was 88%. Reliability verification was conducted by ICC analysis. As a result of reliability verification, the correlation coefficient r=0.743~0.916 showed high correlation between subjects, and the consistency for repeated measurement was also very high at ICC=0.937. In conclusion, despite the disadvantage that Kinect sensor is less accurate than the motion capture system, Kinect is it has the advantage of low price and real-time information feedback. This means that the Kinect sensor is likely to be used as a tool for evaluating exercise prescription through human motion measurement and analysis.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.191-198
• /
• 2015

Objective : The purpose of this study was to conduct biomechanical analysis of varying backpack loads on the lower limb movements during downhill walking over $-20^{\circ}$ ramp. Method : Thirteen male university students (age: $23.5{\pm}2.1yrs$, height: $175.7{\pm}4.6cm$, weight: $651.9{\pm}55.5N$) who have no musculoskeletal disorder were recruited as the subjects. Each subject walked over $20^{\circ}$ ramp with four different backpack weights (0%, 10%, 20% and 30% of body weight) in random order at a speed of $1.0{\pm}0.1m/s$. Five digital camcorders and two force plates were used to obtain 3-d data and kinetics of the lower extremity. For each trial being analyzed, five critical instants were identified from the video recordings. Ground reaction force, loading rate, decay rate, and resultant joint moment of the ankle and the knee were determined by the inverse dynamics analysis. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among four different backpack weight conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results : The results of this study showed that the medio-lateral GRFs at RHC in 20% and 30% body weight were significantly greater than the corresponding value in 0% of body weight. A consistent increase in the vertical GRFs as backpack loads increased was observed. The valgus joint movement of the knee at RTO in 30% body weight was significantly greater than the corresponding values in 0% and 10% body weight. The increased valgus moment of 30% body weight observed in this phase was associated with decelerating and stabilizing effects on the knee joint. The results also showed that the extension and valgus joint moments of the knee were systematically affected by the backpack load during downhill walking. Conclusion : Since downhill walking while carrying heavy external loads in a backpack may lead to excessive knee joint moment, damage can occur to the joint structures such as joint capsule and ligaments. Therefore, excessive repetitions of downhill walking should be avoided if the lower extremity is subjected to abnormally high levels of load over an extended period of time.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2008

The purpose of this study was to investigate kinematic coordination and control of lower segments in skill process. For the investigation, we examined the difference of resultant linear velocity of segments and angle vs angle graph. Novice subjects were 9 male middle school students who has never been experienced a taekwondo and expert subjects were 7 university taekwondo players. We analyzed kinematic variables of Dollyochagi motion through videographical analysis and the conclusion were as follows. 1. Examining the graph of novice subjects' maximal resultant linear velocity of the thigh, shank, and foot segment, as it gets closer to the end of the training, the maximal resultant linear velocity in each segment increased. Statistical analysis showed the following results; thigh segment caused the increase of speed, using the trunk segment's momentum in the latter term of learning, while the shank segment utilized the momentum of the adjacent proximal segment at the beginning of learning, and the foot segment in the middle of learning. 2. Until the point where the knee joint angle is minimum, as the novice group learn the skill, the flexion of knee and hip joints has changed into the form of coordination pattern in phase. On the other hand, the expert group showed continual coordination pattern in phase that the movement sequences were smooth. From the knee joint maximal flexion to impact timing, all novice and expert groups showed coordination pattern out of phase. 3. From the knee joint maximal flexion to impact timing, the ankle joint was fixed and the knee joint was extended to all the novice stages and expert subjects.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.467-479
• /
• 2009

The purpose of this study was to present the quantitative data which riders can utilize teaching field by comparison analysis of kinematics according to skill level of rider during 2 strides rising trot with the JeJu's-Horse. Participated subjects was consisted of total 10 riders(unskilled: n=5, skilled: n=5). The method of experiment & analysis was based on 3D cinematography. Variables were consisted of temporal, linear & angular kinematics by each event & phase. The skilled assigned more ratio of elapsed time in air than support phase, had the less range of motion in up-down direction and more consistent velocity in lateral & forward direction and performed periodic up-down movement with alignment in vertical direction according to elapsing of phases. The skilled more flexed at elbow and extended backwardly according to elapsing of phases, while more flexed forwardly at hip & knee and plantarflexion at ankle. The skilled postured backward extension but the unskilled do forward flexion. That is, It was considered that the unskilled continued more unstable posture than the skilled during 2 strides in rising trot.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.167-177
• /
• 2009

The purpose of this study was to investigate effect of golf shoe design on kinematic variables during golf swing. Five professional male golfers with shoe size 270mm were recruited for the study. Swing motion was collected using 8 high speed camera motion analysis at a sampling of 180Hz. Kinematic variables were calculated by EVaRT 4.2 software. Driver swing was divided into four events; El(adress), E2(top), E3(impact) and E4(finish). Time, peak velocity, velocity of center of mass, velocity of the foot and ankle angle during Phase 1(El-E2), Phase 2(E2-E3), and Phase 3(E3-E4) were analyzed in order to investigate the relationship between golf shoe design and swing performance. The findings indicated that type C golf shoes would be beneficial for stability and control of movement during address and swing performance. Furthermore, faster speed of golf shoes, center of mass, and both feet were observed with Type C golf shoes. It is expected that golfers with Type C golf Shoes provide greater force as they control the center of mass faster and increase rotational force during impact compared to other golf shoes.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.149-157
• /
• 2009

The purpose of this project was to determine biomechanical differences between Type A(Korean brand) and Type B(world top brand) badminton shoes and to make recommendations to improve the fit and function of Type A badminton shoes. Measurements of shoe shape and dimensions, foot movement within the shoe, cushioning of ground reaction forces, in-shoe pressure and outsole traction were performed. In addition, subjective feedback of the fit and function of the shoes was quantified for 17 recreational badminton players. Type A shoe had a much higher heel and shallower heel cup, so the heel was not secured well in the shoe and the ankle joint was higher off the ground. Foot slippage was up to 40% greater in Type A shoe than Type B shoe. Impact forces and peak pressures under the foot were generally higher with Type A shoe compared to Type B shoe. The flexion axis of Type A shoe occurred in the midfoot, not at the ball of the foot like Type B shoe, where you would want the shoe flexion to occur. In summary, there are several characteristics where A Type shoe and B Type differ. Therefore, a few recommendations are provided to help improve the fit and function of A Type shoe.

• The Journal of the Korean bone and joint tumor society
• /
• v.8 no.3
• /
• pp.76-82
• /
• 2002

Purpose: Benign bone tumor of the talar body have rarely been evaluated according to the therapeutic methods because of the scarcity of their incidence. Here, we report our experience of 8 cases who were treated by using of posterior approach and curettage through the posterior process of the talus. Materials and Methods: Between February 1986 and October 2001, we experienced 8 cases of benign bone tumor occurring in the talar body. They included two osteoid osteomas, two giant cell tumors, one capillary hemangioma, one chondroblastoma, one simple bone cyst, and one osteochondroma. Their mean age was 22.1 years (ranging from 10 to 41 years). Mean follow-up period was 7.7 years (ranging from 1 to 16 years). All patients were treated by using of posterior approach. Two osteoid osteomas and one osteochondroma were treated by excision of tumors. Other cases were treated with curettage through the cortical window on the posterior process of the talus. Results: There was no recurrence during the follow-up period. one infection occurred. Except this case, all patients had no pain in weight-bearing, and complete range of movement at the ankle joint was reserved in each case. Conclusion: In this study, we suppose that posterior approach to the talar body may be a safe method with minimal damage of normal tissues and sufficient of curettage is capable through the cortical window on the posterior process of the talus.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.308-313
• /
• 2021

Objective: The purpose of this study was to investigate the effect of different kettlebell mass (30%, 40%, and 50% of the body mass) on kinematics and kinetic variables of kettlebell swing. Method: Total of 16 healthy male who had at least 1 year of kettlebell training experience were participated in this study (age: 31.69 ± 3.46 yrd., height: 173.38 ± 4.84 cm, body mass: 74.53 ± 6.45 kg). In this study, a 13-segments whole-body model (upper trunk, lower trunk, pelvis, both side of forearm, upperarm, thigh, and shank) was used and 26 reflective markers were attached to the body to identify the segments during the movement. A 3-dimensional motion analysis with 8 infrared cameras and 4 channeled EMG was performed to find the effect of kettlebell mass on its swing. To verify the kettlebell mass effect, a one-way ANOVA with a repeated measure was used and the statistical significance level was set at 𝛼=.05. Results: Firstly, in all lower extremity joints and thoracic vertebrae, a statistically significant change in angle was shown according to an increase in kettlebell mass during kettlebell swing (p<.05). Secondly, in both the up-swing and down-swing phases, the knee joint and ankle joint ROM showed a statistically significant increase as the kettlebell mass increased (p<.05) but no statistically significant difference was found in the hip joint and thoracic spine (p>.05). Lastly, the hamstrings muscle activity was statistically significantly increased as the kettlebell mass increased during up-swing phases (p<.05). Also, as the kettlebell mass increased in P4 of the down swing phase, the gluteus maximus showed a statistically significantly increased muscle activation, whereas the rectus femoris showed a statistically significantly decreased muscle activation (p <.05). Conclusion: As a result of this study, hip extension decreased and knee extension increased at 40% and 50% of body mass, and the spine also failed to maintain neutrality and increased flexion. Also, when kettlebell swings are performed with 50% of body mass, synergistic muscle dominance appears over 30% and 40% of body mass, which is judged to have a risk of potential injury. Therefore, it is thought that for beginners who start kettlebell exercise, swing practice should be performed with 30% of body mass. In addition, even in the case of experienced seniors, as the weight increases, the potential injury risk may increase, so it is thought that caution should be exercised when performing swings with 40% and 50% of body mass. In conclusion, it is thought that increasing the weight after sufficiently training with 30% of the weight of all subjects performing kettlebell swing is a way to maximize the exercise effect as well as prevent injury.