• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.75-76
• /
• 2003

Current efforts to establish links between geometrical features and mechanical performance of nonwoven fabrics in general, and of point-bonded (spot-bonded) nonwovens in particular, would be served significantly by the measurements of Fiber Orientation Distribution Function (ODF) and tensile modulus which occurs during controlled-deformation experiments. Image analysis technique (using the Fast Furier Transform) is used to quantify the fiber orientation distribution. The results suggest that, within a typical window of processing conditions, ODF has a significant influence on the mechanical anisotropy. The data also suggest that mechanical anisotropy of thermally point-bonded nonwovens is likely to be governed by different stress mode according to the applied macroscopic tensile direction.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.177-181
• /
• 2004

Current efforts to establish links between geometrical features and mechanical performance of nonwoven fabrics in general, and of point-bonded (spot-bonded) nonwovens in particular has been made using the measurements of Fiber Orientation Distribution Function (ODF) and tensile modulus which occurs during controlled-deformation experiments. Image analysis technique (using the Fast Fourier Transform) was used to quantify the fiber orientation distribution. The results suggest that, within a typical window of processing conditions, the fiber orientation has a significant influence on the anisotropical behavior of nonwoven. The data also suggest that mechanical anisotropy of thermally point-bonded nonwovens is likely to be governed by different load transfer mechanism according to the applied macroscopic tensile direction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.735-741
• /
• 2008

Identification of asymmetry and anisotropy of rotor system is important for diagnosis of rotating machinery. Directional frequency response functions (dFRFs) are known to be a powerful tool in effectively detecting the presence of asymmetry or anisotropy. In this paper, an input noise effect of dFRFs for rotors is estimated, when both asymmetry and anisotropy are present. The normalized random errors of the dFRFs are calculated to verify the validity of the method, which is demonstrated by numerical simulation with a simple rotor model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.58-61
• /
• 1998

Anisotropy is closely related to the formability of sheet metal and should be considered carefully for more realistic analysis of actual sheet metal forming operations. In order to better describe anisotropic plastic properties of aluminum alloy sheets, a planar anisotropic yield function which accounts for the anisotropy of uniaxial yield stresses and strain rate ratios simultaneously was proposed recently[1]. This yield function was used in the finite element simulations of cup drawing tests for an aluminum alloy 2008-T4. Isotropic hardening with a fixed initial back stress based on experimental tensile and compressive test results was assumed in the simulation. The computation results were in very good agreement with the experimental results. It was shown that the initial back stress as well as the yield surface shape have a large influence on the prediction of the cup height profile.

• Advances in nano research
• /
• 제5권1호
• /
• pp.13-25
• /
• 2017

We examine the total optical dielectric function (TODF) of impurity doped GaAs quantum dot (QD) from the viewpoint of anisotropy, position-dependent effective mass (PDEM) and position dependent dielectric screening function (PDDSF), both in presence and absence of noise. The dopant impurity potential is Gaussian in nature and noise employed is Gaussian white noise that has been applied to the doped system via two different modes; additive and multiplicative. A change from fixed effective mass and fixed dielectric constant to those which depend on the dopant coordinate manifestly affects TODF. Presence of noise and also its mode of application bring about more rich subtlety in the observed TODF profiles. The findings indicate promising scope of harnessing the TODF of doped QD systems through expedient control of site of dopant incorporation and application of noise in desired mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.778-781
• /
• 2002

MI(Magneto-Impedance) sensor which is made by thin films has significantly high detecting sensitivity in weak magnetic field. It also has a merit to be able to build in the low power system. Its structure is simple, which makes it easier to prepare a miniature. In this study, its magnetic permeability and anisotropy field$(H_k)$ as a function of a thickness of sputtered amorphous CoZrNb films with zero-magnetostriction and excellent soft magnetic property are investigated. In order to make a uniaxial anisotropy, film was subjected to the post annealing in a static magnetic field with 1KOe intensity at 250, 300, and $320^{\circ}C}$ respectively for 2 hours. Anisotropy field$(H_k)$ of film is measured by using a MH loop tracer. Its magnetic permeability of a film is measured over the frequency range from 1 MHz to 750MHz. It has shown that the magnetic permeability of amorphous CoZrNb film is decreased due to the skin effect with increasing a thickness of the CoZrNb film, and hence its driving frequency is lowered. And, it was examined on the permeability and impedance to fabricate the MI sensor which acts at a low frequency by thickening a CoZrNb film relatively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.560-563
• /
• 2007

The light efficiency of fringe-field switching (FFS) mode was found to be dependent on the magnitude of dielectric anisotropy, indicating that the voltagedependent maximal effective cell retardation value in the on state is a function of magnitude of the dielectric anisotropy of the LC.

• 비파괴검사학회지
• /
• 제17권4호
• /
• pp.270-277
• /
• 1997

소성이방성은 판재의 가공성을 결정하는 중요한 인자로써 주로 기계적인 인장시험에 의해 측정되고 평가되어 왔다. 압연 방향에 대하여 상대적인 방향으로 진행하는 초음파의 속도로부터 집합조직의 결정분포함수를 구할 수 있으며, 결정분포함수의 계수인 결정방위계수는 소성이방성의 평균값들과 상관 관계를 갖는다. 본 실험에서는 초음파 속도로 구한 결정방위계수와 압연강판의 소성이방성을 비교하여 서로의 상관 관계를 구하였으며, 측정결과 average normal anisotropy, $\bar{\gamma}$는 ${\pm}0.082$, average planar anisotropy, ${\Delta}r$는 ${\pm}0.096$의 편차 내에서 예측 가능하였다. 초음파 속도 측정에는 공진주파수측정법이 적용되었고, 초음파의 송수신에는 EMAT가 이용되었다.

• 한국자기학회지
• /
• 제15권1호
• /
• pp.25-29
• /
• 2005

고상에피택시방법으로 성장한 YIG 박막의 온도에 따른 자기특성의 변화를 결정이방성과 수직이방성을 중심으로 측정하였다. 고상에피택시법의 열처리 온도가 낮을 경우 전위가 발생하여 응력을 해소함으로써 수직이방성이 유도되지 않았으나 높은 온도에서 열처리된 박막에는 우수한 에피택시성장으로 잔류응력이 축적되어 수직이방성이 유도되었다. 수직이방성자장은 기판과 박막의 열팽창계수의 차이로 결정자기이방성이 없어지는 온도까지 선형으로 감소하였고, 보자력도 온도가 증가하면 감소하였다. YIG(111) 에피택시박막에 수직이방성이 유도되었을 경우 결정이방성상수 $K_1$을 $H_k=4K_1/3M_s$로부터 결정할 수 있었다. 온도에 따른 초자화율의 거동은 Hopkinson 효과로 잘 설명되어졌으며 측정결과를 이용하명 상자성 자화율이 큰 기판위에 성장한 박막의 큐리온도를 쉽게 측정할 수 있었다.

• 소성∙가공
• /
• 제32권3호
• /
• pp.136-144
• /
• 2023

This study analyzed the mechanical behavior of lithium-ion battery pouch material and predicted its formability. A homogenization method was used to evaluate the physical properties of the pouch, and a new hardening model was developed. The yield function for the plastic model was optimized, and the anisotropic property was determined. Also, the forming limits were measured and predicted using the M-K forming limit diagram. Finally, a square cup drawing experiment confirmed the accuracy of the measured mechanical properties and the formability calculation.