• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.544-550
• /
• 2013

A grooved surface with anisotropic wettability was fabricated on a silicon substrate using photolithography, reactive ion etching, and a KOH etching process. The contact angles (CAs) of water droplets were measured and compared with the theoretical values in the Cassie state and Wenzel state. The experimental results showed that the contact area between a water droplet and a solid surface was important to determine the wettability of the water. The specimens with native oxide layers presented CAs ranging from $71.6^{\circ}$ to $86.4^{\circ}$. The droplets on the specimens with a native oxide layer could be in the Cassie state because they had relatively smooth surfaces. However, the CAs of the specimens with thick oxide layers ranged from $33.4^{\circ}$ to $59.1^{\circ}$. This indicated that the surface roughness for a specimen with a relatively thick oxide layer was higher, and the water droplet was in the Wenzel state. From the CA measurement results, it was observed that the wetting on the grooved surface was anisotropic for all of the specimens.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.629-632
• /
• 2013

Many properties of inorganic compounds are sensitive to changes in the point-defect concentrations. In minerals, such changes are influenced by temperature, pressure, and chemical impurities. Olivines form an important class of minerals and are magnesium-rich solid solutions consisting of the orthosilicates forsterite $Mg_2SiO_4$ and the fayalite $Fe_2SiO_4$. Orthosilicates have an orthorhombic crystal structure and exhibit anisotropic electronic and ionic transport properties. We examined the anisotropy of the electrical conductivity of $Fe_2SiO_4$ under the assumption that the electronic conduction in $Fe_2SiO_4$ occurs via a small polaron hopping mechanism. The anisotropic electrical conductivity is well explained by the electron transfer integrals obtained from the spin dimer analysis based on tight-binding calculations. The latter analysis is expected to provide insight into the anisotropic electrical conductivities of other magnetic insulators of transition metal oxides.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.367-375
• /
• 2014

A simplified material model, which was efficiently implemented in a three-dimensional finite solid element (3D FE) analysis for wood was developed. The bi-linear elasto-plastic anisotropic material theory was adopted to describe constitutive relations of wood in three major directions including longitudinal, radial and tangential direction. The assumption of transverse isotropy was made to reduce the requisite 27 material constants to 6 independent constants including elastic moduli, yield stresses and Poisson's ratios in the parallel, and perpendicular to grain directions. The results of Douglas fir compression tests in the three directions were compared to the 3D FE simulation incorporated with the wood material model developed in this study. Successful agreements of the results were found in the load-deformation curves and the permanent deformations. Future works and difficulties expected in the advanced application of the model were discussed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.77-84
• /
• 2006

With the development of micro/nano spacecraft, concepts of micro propulsion are introduced for orbit transfer and drag compensation as well as attitude control. Micro solid propellant thruster has been attention as one of possible solution for micro thruster. In this paper, micro solid propellant thruster is introduced and research on basic components of a micro solid propellant thruster is reported. Micro Pt igniter was fabricated through negative patterning and quantitative effect of geometry was estimated. The characteristic of HTPB/AP solid propellant was investigated to measure the homing velocity. A combustion chamber was fabricated by means of anisotropic etching of photosensitive glass. Finally, micro solid propellant thrusters having various geometries were fabricated and tested.

• Journal of Korea Foundry Society
• /
• v.34 no.3
• /
• pp.87-93
• /
• 2014

Thixo-extrusion of semi-solid 7075 aluminum alloy and the mechanical properties of its extrudates were investigated. The semisolid alloy was prepared by a cooling slope cast. In other to perform thixo-extrusion, semi-solid 7075 aluminum alloy billets were reheated at the reheating conditions reported in a previous study. The maximum extrusion pressure in thixo-extrusion was 615MPa. This was lower than that of conventional hot extrusion ($P_{max}=940MPa$) at the same extrusion conditions due to the increased fluidity of the alloy billet in the semi-solid state. The values of Rockwell hardness (scale B) at the extrusion direction of the as thixoextruded bar were 48~53HRB and the difference in Rockwell hardness between the transverse direction and the extrusion direction was 5HRB or less. The results show that thxio-extrusion of semi-solid 7075 Al alloy improves the workability and anisotropic with the extrusion direction compared with hot extrusion of the conventional alloy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.993-1000
• /
• 2002

The objective of this work is to develop the capability to analyze accurately the mixed-mode propagation of a crack in composite structures with elastic orthotropic material stiffness properties and anisotropic material strength characteristics. In order to develop the capability to fully analyze fracture growth and failure in anisotropic structures, we examined the fundamental problem of mixed mode fracture by carrying out the analysis on orthotropic materials with an inclined crack subject to biaxial loading. Our goal here is to include an additional term in the asymptotic expansion of the crack tip stress field and to show that the direction of crack initiation can be significantly affected by that term. We employ the normal stress ratio theory to predict the direction of crack extension. It is shown that the angle of crack extension can be altered by horizontal loads and the use of second order term in the series expansion is important f3r the accurate determination of crack growth direction.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.21-23
• /
• 1995

The analysis of the thin lamination model of the wound core type transformer by FEM requires many region division and much calculationg time, and it has difficulty in calculation by modem computer. A new method which is simulated by a solid but anisotropic block with the magnetic permeabilities in the orthogonal dimension, is selected to account for the presence of the lamination.[1] Based on this equivalent anisotropic block model, we analyze the iron loss of the wound core type transformer by FEM, and compare the simulation results with the experimental results.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.156-158
• /
• 1994

The analysis of the thin lamination model of the amorphous transformer by FEM requires many region, divisions and much calculating tine, and it has difficulty in calculating for mordern computer. A new method which is simulated by a solid but anisotropic block with the magnetic permeabilities in two orthogonal directions selected to account for the presence of the laminations. [1] Based on this equivalent anisotropic block model, we analyzed the iron loss of the amorphous transformer by FEM, and presented an optimal design example of core dimensions for minimizing the iron loss.

• Korean Journal of Materials Research
• /
• v.17 no.9
• /
• pp.500-506
• /
• 2007

The effects of anisotropic surface energy on the microstructure development of porous materials have been studied through Monte Carlo simulation using a three dimensional lattice. The changes in porosity ($f_v$), mean grain diameter ($D_s$), fraction of connected pores ($f_{v,c}$) and contiguity of the solid phase (C) were examined in cases with three different ${\gamma}_{SV}$ relations and initial grain diameters ($D_{s,o}$). It has been found that larger ${\gamma}_{SV}$ enhances sintering of particles and increases C and does not change $D_s$. And Introducing anisotropic ${\gamma}_{SV}$ brought an increase in $f_v$ and $f_{v,c}$ and an decrease in $D_s$ and C, and this tendency become more marked for fine $D_{s,o}$.

• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.2
• /
• pp.127-139
• /
• 1999

In this paper we discussed how multiple quantum coherences evolve in the presence of anisotropic distribution of dipolar couplings. The magnitude of dipolar couplings were varied by changing the tile angle of crystal axis. The stronger was dipolar coupling, the higher was frequency of multiple quantum coherence. That is, the order of multiple quantum coherence varies in proportion to the magnitude of dipolar couplings. The theoretical prediction for the multiple quantum coherence at magic angle 54.7$^{\circ}$ in solid NMR spectroscopy was verified in this study. The excitation pattern of n-quantum coherence, which can induce the effective size to characterize spin system, is expected in a larger and more complicated spin system for understanding of the relation of dipolar coupling and multiple quantum coherence.