• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.1-6
• /
• 1998

To change permselectivity between anions through the anion exchange membrane in electrodialysis, the various modified anion exchange membranes were prepared: highly crosslinked anion exchange membranes, anion exchange membranes having benzyl trialkylammonium groups with different carbon number of alkyl chain as anion exchange groups and anion exchange membranes having pyridinium groups with a hydrophilic or hydrophobic substituent at a different position as anion exchange groups. It became clear from the evaluation of these membranes that the degree of the hydrophilicity of the anion exchange membranes greatly affects the permselectivity between two artions. To increase the hydrophiticity of the anion exchange membranes further, electrodialysis was carried out in the presence of ethylene glycols and the permeation of strongly hydrated anions increased and that of less-hydrated anions decreased. It became clear that the change in the permselectivity between two artions is due to the change in the affinity of anions to the membranes, not the change in mobility ratio of the anions in the membranes phase.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.49-54
• /
• 2012

Various anion exchange membranes were prepared by radiation graft copolymerization of vinylbenzyl chloride onto fluorinated films and subsequent quaternization with various tertiary amines such as trimethylamine, N,N-dimethylbuthylamine, N,N-dimethylaniline, and N-methylpiperidine. The quaternizations of the anion exchange membranes were confirmed by measuring of the ion exchange capacities of the membranes. The mechanical properties and the water uptakes were also measured. The elongation at break was found to be largely dependent on the fluorinated film, the quateranry ammonium, and the degree of grafting. The results indicate that the poly (ethylene-alt-tetrafluoroethylene) with quaternized trimethylamine moiety exhibits higher flexible property compared to the other prepared anion exchange membranes.

• 멤브레인
• /
• 제25권6호
• /
• pp.515-523
• /
• 2015

상업적으로 이용되는 폴리스티렌계 이온교환막은 제조 공정이 쉽고 간단하지만 막이 가지는 취성 때문에 내구성이 약하다는 단점을 가지고 있다. 이를 보완하기 위하여 친수성 그룹인 poly(ethylene glycol)을 곁사슬로 가지고 있는 poly(ethylene glycol)methyl ether methacrylate를 공중합시켜 음이온 교환막을 합성하였다. 지지체로는 내화학성 및 기계적 강도가 우수한 다공성 PE 지지체를 사용하였고, 여기에 다양한 조성의 vinylbenzyl chloride, styrene, poly(ethylene glycol)methyl ether methacrylate, divinylbenzene, benzoyl peroxide를 녹인 단량체 용액을 지지체 기공에 채운 뒤 열중합 가교시켜 trimethylamine을 이용하여 음이온 교환기를 도입해 세공충전 음이온 교환막을 합성하였다. 또한 poly(ethylene glycol)methyl ether methacrylate의 곁사슬 길이와 각 단량체가 차지하는 비율의 변화가 음이온 교환막의 전기화학적 특성에 미치는 영향을 알아보았다.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.319-327
• /
• 2022

Ion exchange membranes have been developed from laboratory tools to industrial products with significant technical and trade impacts in the last 70 years. Today, ion exchange membranes are successfully applied for water and energy for different electro-membrane processes. Hydrogen could be produced by electrochemical water splitting using renewable energy, for example, solar, biomass, geothermal and wind energy. This review briefly summarizes the recent studies reporting the state-of-the-art anion-exchange membrane water electrolysis, especially focusing on the enhancement of the durability of anion-exchange membranes. Anion-exchange membrane water electrolysis could be used as inexpensive non-noble metal electrocatalysts that are capable of producing low cost of hydrogen. However, the main challenge of anion-exchange membrane water electrolysis is to increase the performance and durability. In this mini review, the limiting factors of the durability and the technology enhancing the durability will be discussed for anion exchange membrane water electrolysis.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.23-38
• /
• 2016

Batch adsorption of methyl orange (MO) from aqueous solution using three kinds of anion exchange membranes BI, BIII and DF-120B having different ion exchange capacities (IECs) and water uptakes ($W_R$) was investigated at room temperature. The FTIR spectra of anion exchange membranes was analysed before and after the adsorption of MO dye to investigate the intractions between dye molecules and anion exchange membranes. The effect of various parameters such as contact time, initial dye concentration and molarity of NaCl on the adsorption capacity was studied. The adsorption capacity found to be increased with contact time and initial dye concentration but decreased with ionic strength. The adsorption of MO on BI, BIII and DF-120B followed pseudo-first-order kinetics and the nonlinear forms of Freundlich and Langmuir were used to predict the isotherm parameters. This study demonstrates that anion exchange membranes could be used as useful adsorbents for removal of MO dye from wastewater.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.28-37
• /
• 2022

In this study, we synthesized a poly(pheneylene oxide) (PPO)-based organic/inorganic composite membrane having silicotungstic acid (STA) for the development of an anion exchange membrane with excellent ionic conductivity and physicochemical stability. The organic/inorganic composite membranes were prepared by introducing different STA contents (0 wt%, 10 wt%, 30 wt%, and 50 wt%) into the quaternizaed(Q)-PPO matrix. The prepared anion exchange membranes were subjected to structural analysis by proton neclear magnetic resonance and Fourier transform infrared, and thermal behavior of membranes was confirmed by thermogravimetric analysis. Among the prepared composite membranes, the ion conductivity of Q-PPO/STA-50 (40.5 mS cm^-1) showed 1.46 times compared to that of the pristine membrane (27.6 mS cm^-1). Therefore, these results demonstrated that organic/inorganic composite membranes are promising candidates for application of anion exchange membranes.

• Membrane and Water Treatment
• /
• 제3권1호
• /
• pp.63-76
• /
• 2012

Mother liquid discharged from a salt-manufacturing plant was electrodialyzed at 25 and $40^{\circ}C$ in a continuous process integrated with $SO_4{^{2-}}$ ion low-permeable anion-exchange membranes to remove $Na_2SO_4$ and recover NaCl in the mother liquid. Performance of electrodialysis was evaluated by measuring ion concentration in a concentrated solution, permselectivity coefficient of $SO_4{^{2-}}$ ions against $Cl^-$ ions, current efficiency, cell voltage, energy consumption to obtain one ton of NaCl and membrane pair characteristics. The permselectivity coefficient of $SO_4{^{2-}}$ ions against $Cl^-$ ions was low enough particularly at $40^{\circ}C$ and $SO_4{^{2-}}$ transport across anion-exchange membranes was prevented successfully. Applying the overall mass transport equation, $Cl^-$ ion and $SO_4{^{2-}}$ ion transport across anion-exchange membranes is evaluated. $SO_4{^{2-}}$ ion transport number is decreased due to the decrease of electro-migration of $SO_4{^{2-}}$ ions across the anion-exchange membranes. $SO_4{^{2-}}$ ion concentration in desalting cells becomes higher than that in concentration cells and $SO_4{^{2-}}$ ion diffusion is accelerated across the anion-exchange membranes from desalting cells toward concentrating cells.

• Membrane and Water Treatment
• /
• 제4권3호
• /
• pp.203-214
• /
• 2013

Laboratory tests were performed to determine the efficiency of dye solution desalination by electrodialysis. The study involved anionic dye and mineral salt recovery by obtaining two streams from a salt and dye mixture - dye-rich solution and salt solution. A standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes were used in the ED stack. It was found that the separation efficiency was strongly dependent on the dye molecular weight. The best results for standard ion-exchange membranes were achieved for the desalination of Direct Black solution. Furthermore, the obtained results implied that the application of monovalent selective anion-exchange membranes improved the recovery of dye and salt solutions - the dye concentration in the diluate remained constant irrespective of the molecular weight of anionic dyes, whereas the salt recovery remained very high (99.5%).

• 공업화학
• /
• 제21권6호
• /
• pp.621-626
• /
• 2010

음이온 교환막은 전기투석뿐만 아니라 역전기투석에 의한 전기생산과 축전 탈이온에 의한 정수 분야에 이용될 수 있다. 본 연구에서는 폴리비닐알콜 수용액 상에서 (vinylbenzyl)trimethylammonium chloride와 2-hydroxyethyl methacrylate를 중합한 후 글루타르산과의 에스테르화 반응, 그리고 글루타르알데히드와 가교반응을 통해서 음이온 교환막을 제조하였다. 실험 변수에 따라 음이온 교환막을 제조하고 이온교환막의 전기화학적 물성을 조사하였다. 중합반응에서 음이온 교환성 단량체 비율에 따라 이온교환량과 저항 값이 변하였으며, 에스테르화 반응에서는 글루타르산의 함량의 증가에 따라 함수율과 전도도가 감소하였다. 형성된 필름과 알데히드의 가교반응 시간 변화는 함수율, 전기저항, 이동수 값들에 영향을 미쳤다. 끝으로 제조된 이온 교환막의 chronopotentiometry와 한계전류밀도도 측정하였다.

• 멤브레인
• /
• 제28권5호
• /
• pp.326-331
• /
• 2018

축전식 탈염(capacitive deionization)에 이용할 수 있는 폴리페닐렌 옥사이드(PPO) 음이온 교환막의 가교결합에 대해 조사하였다. 브롬화와 아민화 반응단계를 거쳐 PPO 음이온 교환 고분자를 제조하고 비스페놀 A 디글리시딜에테르(BADGE), m-페닐렌디아민(m-PDA), 헥사메틸렌디아민(HMDA) 등으로 가교하였다. 가교에 따른 겔화되는 시간은 HMDA > m-PDA > BADGE 순으로 짧았으며, 일정한 함량 이상으로 실온에서 가교하면 1-메틸피롤리돈(NMP)과 같은 비양성자성 용매(aprotic solvent)에 녹지 않아 내화학성이 증대되었다. 가교제(BADGE) 함량에 따른 음이온 교환막의 이온 교환 용량과 함수율을 측정하고 비교하였다. HMDA 용액에 침적하여 표면 가교한 PPO 음이온 교환막을 축전식 탈염에 적용한 결과 그 탈염 성능은 가교하지 않은 막과 비교하여 흡착단계의 초기 부분을 제외하고 거의 차이가 없었다.