• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.536-542
• /
• 2020

This paper presents a nature-inspired wideband sprout-leaf shaped antenna with end-fire radiation pattern. A sprout-leaf shape angled-radiator was designed for wide beamwidth radiation patterns for motion detection sensors. An extended and truncated ground plane was used as a reflector for end-fire radiation patterns. To feed the balanced radiator, a broadband microstrip (MS) to coplanar stripline (CPS) balun was utilized with excellent amplitude and phase balance. The proposed antenna demonstrates wide frequency bandwidth from 8.5 to 14.5 GHz with wide beamwidth and the radiation efficiency of 90%. The measured gain is from 4 to 5 dBi and front-to-back ratio was 10 to 20 dB. It has been shown that the proposed antenna can be used for imaging sensors, phased array systems, and radars that require a wide bandwidth and a directional radiation pattern.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.245-256
• /
• 2001

The morphological characteristics of spermatogenic cells during the spermiogenesis of Paradoxornis webbiana were studied by transmission electron microscope. Spermiogenesis of P. webbiana was divided into ten phase. The chromatin granules became fibrous granules at the Golgi phase, gradually condensed at the cap phases, condensed as a stick at the acrosomal phase, and finally, a perfect nucleus was formed at the maturation phase. The formation of sperm tail began at the early Golgi phase, and completed at the late maturation phase. In particular, the dense materials existed in the sperm neck, which is wedged between the tip of segmented columns and the first mitochondria of the middle piece. The axone in the neck were surrounded by the dense materials. The axonema in spermatozoon contains a 9+2 arrangement of microtubules: 9 doublets, and 2 central single microtubules. Mitochondrial bundles of middle piece were composed of a pair of arms, which surrounded the axone of the middle piece by the $15^{\circ}$ angled-helical structure. The outer membrane of mitochondria were surrounded by microtubules in plasma membrane of the sperm. The undulating membrane had a helical structure, and the sperm plasma membrane was surrounded by undulating membrane.

• The Plant Pathology Journal
• /
• v.21 no.3
• /
• pp.252-257
• /
• 2005

In single infection of Tobacco mosaic virus-U1 (TMV­U1) or Pepper mild mottle virus (PMMoV), mosaic symptoms were produced on the chili pepper cultivars of 'Cheongyang' and 'Wangshilgun'. However, in cultivars of 'Manitta' and 'Bugang', no symptoms were occurred. In single infection of Pepper mottle virus (PepMoV), symptoms of mottle and malformation were produced on the tested cultivars of 'Manitta', 'Bugang', 'Cheongyang', and 'Wangshilgun'. In the cultivars of 'Cheongyang' and 'Wangshilgun', synergistic symptoms of stunt and lethal death were induced by mixed infections in the two combinations of TMV-U1 + PepMoV and PMMoV+PepMoV. However, in cultivars of 'Manitta' and 'Bugang', synergistic symptoms were not noted, but mottling which was milder than that of single infection was produced. Cells infected singly with TMV-U1 and PMMoV in the cultivars of 'Cheongyang' and 'Wangshilgun', respectively, had the typical ultra-structures of tobamovirus as the stacked-band structure and multiple spiral aggregate (SA). In the cells and tissues infected with PepMoV on the cultivars of 'Cheongyang', 'Wangshilgun', 'Manitta' and 'Bugang', the potyvirus inclusions of pinwheels, scrolls, lamminated aggregates and amorphous inclusion were observed. In the cells infected mixedly with combinations of TMV­U1+PepMoV and PMMoV+PepMoV, the virus particles and inclusions of the two different viruses were found simultaneously in the same cytoplasm. The amounts of virus particles in mixed infections were more abundant than in single infection. The angled-layer aggregates (ALA) were observed only in the cells infected with both TMV-U1 and PepMoV.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.535-541
• /
• 2004

For housing estate of a new administrative capital city, Noise reduction method is a important design factor. As measuring a noise level of traffic noise according to separation from road, it can be created a quite housing estate. Analyzing of merits and demerits in sound barrier walls and tunnels can be proposed environment friendly soundproofing facilities. Number of measurement was performed to know what kind of layout of housing estate is good for noise reduction. Through this measurement, ㄷ shaped layout or parallel layout has the advantage of sound insulation rather than right angled layout. In this case (ㄷ shaped layout or parallel layout) buildings neighboring to the road should be designed to insulate sound. Evergreen trees should be planted between housing estate and road more than 30m (at least 7～8m) in order to reduce noise and have masking effects. If broad-leaved trees are planted more than 30m, approximately 10dB noise is reduced and 2～4dB if 7～8m. Roads in the estate should be designed considering pedestrians first, and special roads for moving and ambulance should be designed as skew road, if possible. The result shows that 15$^{\circ}$-sloped‘S’road reduces 1～2dB noise and 30$^{\circ}$-sloped road reduces 4～7dB. If noise barrier is inevitably installed, it should be designed to go well wit neighboring environment so as to install Environment Friendly Noise Barrier using materials and trees including wood and soil. Through this study the results are used to guideline for construction of environment friendly housing estate

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.267-274
• /
• 1997

Silicon shallow trenches applied to the STI (Shallow Trench Isolation) of integrated circuits were etched using inductively coupled $Cl_2$ and HBr/$Cl_2$ plasmas and the effects of process parameters on the etch profiles of silicon trenches and the physical damages on the trench sidewall and bottom were investigated. The increase of inductive power and bias voltage in $Cl_2$ and HBr/$Cl_2$ plasmas increased polysilicon etch rates in general, but reduced the etch selectivities over nitride. In case of $Cl_2$ plasma, low inductive power and high bias voltage showed an anisotropic trench etch profile, and also the addition of oxygen or nitrogen to chlorine increased the etch anisotropy. The use of pure HBr showed a positively angled etch profile and the addition of $Cl_2$ to HBr improved the etch profile more anisotropically. HRTEM study showed physical defects formed on the silicon trench surfaces etched in $Cl_2/N_2$ or HBr/ $Cl_2$ plasmas.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.723-729
• /
• 2020

Objective : The use of oblique lateral interbody fusion at the L5-S1 level (OLIF51) is increasing, but no study has directly compared OLIF51 and transforaminal lumbar interbody fusion (TLIF) at the L5-S1 level. We evaluated the usefulness of OLIF51 by comparing clinical and radiologic outcomes with those of TLIF at the same L5-S1 level. Methods : We retrospectively reviewed and compared 74 patients who underwent OLIF51 (OLIF51 group) and 74 who underwent TLIF at the L5-S1 level (TLIF51 group). Clinical outcomes were assessed with the visual analogue scale for back pain and leg pain and the Oswestry Disability Index. Mean disc height (MDH), foraminal height (FH), disc angle (DA), fusion rate, and subsidence rate were measured for radiologic outcomes. Results : The OLIF51 group used significantly higher, wider, and larger-angled cages than the TLIF51 group (p<0.001). The postoperative MDH and FH were significantly greater in the OLIF51 group than in the TLIF51 group (p<0.001). The postoperative DA was significantly larger in the OLIF51 group than in the TLIF51 group by more than 10º (p<0.001). The fusion rate was 81.1% and 87.8% at postoperative 6 months in the OLIF51 and TLIF51 groups, respectively, and the TLIF51 group showed a higher fusion rate (p<0.05). The subsidence rate was 16.2% and 25.3% in the OLIF51 and TLIF51 groups, respectively, and the OLIF51 group showed a lower subsidence rate (p<0.05). Conclusion : OLIF51 was more effective for the indirect decompression of foraminal stenosis, providing strong mechanical support with a larger cage, and making a greater lordotic angle with a high-angle cage than with TLIF.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.74-83
• /
• 2008

As urban residents' standard of living has recently risen, efforts to improve urban landscapes have increased. It is very important to manage streetscapes to improve the urban landscape because they are one of the essential elements in city construction and urban landscaping. This study focuses on the indicators that manage streetscapes more accurately and realistically. To achieve this purpose, this study used dynamic simulations considering shape and layout of buildings, the primary factors in streetscapes. This study can be summarized as follows: 1. Two indicators to manage streetscape were investigated in previous studies: one to increase visual openness and the other to reduce visual overstimulation. These indicators had high correlation with scenic beauty. Therefore, increasing openness and reducing overstimulation are essential to improve streetscapes. 2. Two household tower type buildings should be arranged along roadsides to increase openness and scenic beauty. However, low tower buildings with two household are not suitable along roadsides because they create monotony and intervals are needed between buildings. 3. To increase openness, the angled arrangement of buildings is suggested $75^{\circ}{\sim}90^{\circ}(105^{\circ}{\sim}135^{\circ})$ for low buildings, $30^{\circ}{\sim}45^{\circ}(135^{\circ}{\sim}150^{\circ})$ for mid-sized buildings, and $75^{\circ}{\sim}90^{\circ}(105^{\circ}{\sim}135^{\circ})$ for high buildings. 4. To reduce overstimulation, the height and setback control regulations should be at an angle of less than $45^{\circ}$. This study suggests more accurate management guidelines by organizing the indicators that could effectively manage streetscapes and by overcoming limitations of reality shown in a static simulation.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.429-434
• /
• 2006

A CCTV system reduces some number of cameras if we use convex-mirror. In this case, convex-mirror Image distorted, we need transformation to flat images. In the center of mirror images, a transformed image has no distortion, but at near boundary image has plentiful distortion. This distortion is caused by occlusion of angled ray and diffraction. We know that the linear filtering approach cannot separate noise from signal where their Fourier spectra overlap. But using a non-linear discretization method, we shall reduce blurred noise. In this paper, we introduce the backward solution of nonlinear wave equation for reducing blurred noise and biased expansion of equilibrium contour. We propose, after applying the introduced method, and calculate with discretization method. To analysis the experimental result, we investigate to PSNR and get about 4dB better than current method.

• The Korean Journal of Petroleum Geology
• /
• v.1 no.1 s.1
• /
• pp.53-62
• /
• 1993

The geologic structure of the Yongil Bay was studied in detail based on high resolution seismic profiles. The seafloor trends NE to SW with a deeper part off the Kuryong Peninsula. The seafloor is rather smooth due to the Quaternary fluvial deposits in the lower part and muddy sediments in the upper part. The seafloor off Umockri is very irregular due to erosion where Tertiary sedimentary rocks crop out. The underlying basement rocks were strongly deformed with faults and folds. High-angled reverse faults mostly trend N-S and NNW-SSE and are indicative of westward thrusting. Normal faults in NW-SE and WNW-ESE directions occur locally. Large folding structures trend NE-SW nearshore area of Umockri. The geologic structure suggests that the bay was subject to compressional stress regimes trending E-W and/or NW-SE prior to the early Late Miocene.

• Journal of Fashion Business
• /
• v.15 no.3
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.