• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.101-107
• /
• 2006

The force and moment simulation of a steady-state rolling tire taking the effect of tread pattern into account is described using a steady-state transport method with ABAQUS. Tread meshes can not fully consider a tread pattern because detailed tread meshes are not allowed in the steady-state transport method. Therefore, the tread elements are modeled to have orthotropic property instead of isotropic property. The force and moment simulation has been carried out for the cases of both isotropic and orthotropic properties of tread elements. Both cases of simulation results are then compared with the experimental results. It is verified that the orthotropic case is in a better agreement with the experimental result than the isotropic case. Angle effects of tread pattern have been studied by changing the orientation angle of orthotropic property of tread. It is shown that the groove angle in the tread shoulder region has a more effect on force and moment of a tire than that in the tread center region.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of movement training based on motor control theory on pain and average power of muscles in patients with shoulder impingement syndrome and to develop more effective training methods. Methods: We studied 35 patients with shoulder impingement syndrome. Patients were randomly assigned to an experimental group or a control group according to the intervention. The therapeutic modalities such as superficial heat, deep heat, and electronic stimulus, and motor control training with strengthening exercises were applied to the experimental group and therapeutic modalities only were applied to the control group. All interventions were done 3 times a week for 4 weeks. Before the intervention and again after the 4 weeks, we measured pain utilizing a visual analog scale. We measured average power using isokinetic equipment. Results: After application of the intervention, pain significantly decreased in both the experimental group and the control group. There was a significant difference between the extent of the decrease between experimental and control groups. After the intervention, the average power between the two groups were significant at an angle of $60^{\circ}$/sec and $180^{\circ}$/sec for external rotator and internal rotator muscles. They also showed significant improvement in all variables post-intervention compared to pre-intervention. Conclusion: This study indicates that there is an effect in giving appropriate motor control training to patients with shoulder impingement syndrome. It is assumed that there will be a need for more surveys on various variables for motor control training from now on.

• Clinics in Shoulder and Elbow
• /
• v.21 no.4
• /
• pp.220-226
• /
• 2018

Background: This study introduces a surgical technique with good clinical outcome useful in the treatment of osteoporotic displaced 3- or 4-part proximal humeral fractures. Methods: From May 2014 to February 2016, 16 patients with displaced 3- or 4-part proximal humeral fractures were treated by application of a locking plate with an endosteal strut allograft via a deltoid splitting approach with a minimum follow-up of 12 months. The allograft was inserted through a fractured gap of the greater tuberosity to support the humeral head and then fixed by a locking plate with meticulous soft tissue dissection to protect the axillary nerve. Surgical outcomes were evaluated by the American Shoulder and Elbow Surgeons (ASES) and visual analogue scale (VAS) scores, radiological imaging, and clinical examination. Fixation failure on radiographs was defined as a >$5^{\circ}$ loss of neck shaft angle (NSA) compared to that on an immediate postoperative radiograph. Avascular necrosis (AVN) of the humeral head was also evaluated. Results: In all cases, complete union was achieved. The ASES and VAS scores were improved to $85.4{\pm}2.1$ and $3.2{\pm}1.3$, respectively. Twelve patients (75.0%) had greater than a $5^{\circ}$ change in NSA; the average NSA change was $3.8^{\circ}$. Five patients (31.3%) had unsatisfactory ranges of motion exhibiting a <$100^{\circ}$ active forward flexion. No axillary nerve injuries or AVN were observed at the last follow-up. One patient was converted to reverse total arthroplasty due to severe pain and functional deficit. Conclusions: Minimally invasive fixation via a locking compression plate and an endosteal fibula strut allograft in Neer classification 3-or 4-part fractures with severe osteoporosis in elderly patients can achieve good clinical results.

• PNF and Movement
• /
• v.17 no.2
• /
• pp.207-214
• /
• 2019

Purpose: Although multi-directional reaching exercises are commonly used clinically, the effects of specific movement directions on the muscle systems of the lower extremities have not been explored. We therefore investigated lower extremity muscle activity during reaching exercises with different sagittal and horizontal plane movements. Methods: The surface electromyography responses of the bilateral rectus femoris, tibialis anterior, peroneus longus, and gastrocnemius muscles were measured during reaching exercises in three directions in the horizontal plane (neutral, $45^{\circ}$ horizontal shoulder adduction, and $45^{\circ}$ abduction) and three directions in the sagittal plane (neutral, $120^{\circ}$ flexion, and $60^{\circ}$ flexion). A total of 20 healthy, physically active participants completed six sets of reaching exercises. Two-way repeated ANOVA was performed: body side (ipsilateral and contralateral) was set as the intra-subject factor and direction of reach as the inter-subject factor. Results: Reaching at $45^{\circ}$ horizontal shoulder adduction significantly increased the activity of the contralateral rectus femoris and gastrocnemius muscles, while $45^{\circ}$ horizontal shoulder abduction activated the ipsilateral rectus femoris and gastrocnemius muscles. The rectus femoris activity was significantly higher with reaching at a $120^{\circ}$ shoulder flexion compared to the other conditions. The gastrocnemius activity decreased significantly as the shoulder elevation angle increased from $60^{\circ}$ to $120^{\circ}$. Conclusion: Our results suggest that multi-directional reaching stimulates the lower extremity muscles depending on the movement direction. The muscles acting on two different joints responded to the changes in reaching direction, whereas the muscles acting on one joint were not activated with changes in reaching direction.

• Transactions of Materials Processing
• /
• v.8 no.2
• /
• pp.178-187
• /
• 1999

The Cross rolling between flat jaws, as a kind of hot forging, is the forming method to make the axisymmetric multi-step shaft by its rotation and pressure between flat jaws which move in opposite direction. The purpose of this study is to propose the optimal geometric data for shape development of the forward forming region. All data described on this paper are quantified by experiment from initial shape design to final shape development. As the result, proper geometric data are proved that lenth of the first forming area in the forward forming region is 1.5 times larger than circumference of work-piece and the progress angle changes 3 times smoothly.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.400-403
• /
• 2004

A non-heat기leafed steel does not need quenching and tempering processes that are called a heat treatment differently from conventional steel. Since the tensile strength of this steel is higher than 900MPa, a conventional forming process should be changed to incremental forming process such as a cross wedge rolling that requires lower load capacity than conventional ones. In this paper, the cold cross wedge rolling (CWR) die has been designed using CAD/CAE In order to produce near-net-shaped component of ball stud of non-heat-treated cold steel. Finite element analyses were applied in order to investigate process parameters of CWR. Results provide that the stretching angle and the forming angie at knifing zone in CWR process is important parameter to be the stable process under the low friction coefficient condition.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.126-136
• /
• 2009

Purpose: We evaluated the correlation of the anatomic parameters of the acromion those represent on the magnetic resonance image (MRI) of impingement syndrome. Materials and Methods: From June, 2004 to December, 2005, 71 cases were surgically proven to be impingement syndrome, and the anterior acromial hooking angle, the lateral acromial hooking angle (AAHA and LAHA) and the acromial hooking index (AHI: the sum of the AAHA and LAHA) were compared to 16 control cases. At the same period, 55 cases were surgically proven to be partial or full thickness rotator cuff tear, and age, gender and twelve anatomic parameters, including the acromial type, the acromial angle, the anterior covering, the acromial slope, the AAHA, the lateral acromial angle, the acromial torsional angle, the lateral acromial angulation, the LAHA, the lateral covering, the acromiohumeral distance and the AHI were assessed. Results: The AAHA and AHI were increased as impingement syndrome proceeded. The acromial type and acromial angle, and the AAHA, LAHA and AHI showed significant differences between the controls and the rotator cuff tear patients on univariant analysis. On multivariant analysis, gender was most strongly correlated with rotator cuff tear. Age, AAHA and the acromial angle showed similar correlation, respectively. Conclusion: The coronal acromial shape is correlated with rotator cuff tear, and it is important to correct the lateral acromial shape when performing acromioplasty.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.11-18
• /
• 2014

The purposes of this study were to analyze the kinematics and electromyographic variables of the upper extremity for the backhand clear motion according to the type of hitting in badminton. Seven elite male university players were selected as the subjects. Four digital video cameras and Noraxon Telemyo 2400 were used to collect the 3D kinematics and electromyographic data. The results were as follows: 1) in the phase of impact, the time of motion for the overhead backhand clear was the longest, 2) in the event of impact, the distance of step toward X direction was the longest and the distance of step toward Y direction was the shortest for the overhead backhand clear, 3) in the event of backswing, the rotation angles of shoulder and pelvis and the flexion angle of shoulder for the overhead backhand clear were the biggest, 4) the maximum flexion angular velocity of shoulder and the maximum extension angular velocity of elbow for the overhead backhand clear were the biggest, and 5) in the phase of impact, mean EMG of the wrist flexor, triceps, and trapezius muscle for the overhead backhand clear was bigger than that for the underhand stroke and in the phase of follow-through, mean EMG of the wrist flexor and extensor, biceps, triceps, and trapezius muscle for the overhead backhand clear was the biggest.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.323-328
• /
• 2010

If a patient wearing arm sliding due to shoulder dislocation or fracture is impossible with abduction, the velpeau view is performed instead of superior-inferior axial projection view. However, it aggravates the patient's pain because it is difficult for the patient with dislocation or fracture to pull back the shoulders. Therefore, I suggest a new method of the 'modified velpeau view' that allows patients to lower their heads at examination. In order to investigate the easiness of fixing posture at examination and clinical utility, I conducted a study comparing the bone structures at the velpeau view and those at the modified velpeau view depending on wall-bucky and the patients' leaning forward angle ($30^{\circ},\;45^{\circ},\;60^{\circ}\;and\;75^{\circ}$), with the subjects of 20 velpeau view-prescribed patients amongst who had come to my hospital suspected of dislocation of shoulder or fracture and 30 healthy people from October of 2009 to January of 2010. Department of radiologists and orthopedics specialists evaluated the pictures for scales 0 to 5(best grade) under the given criteria. As a result of comparison in bone structures depending on wall-bucky and the leaning-forward angle in the group of healthy people, the velpeau view and the modified velpeau showed a similar diagnostic utility at $45^{\circ}$ and $60^{\circ}$. The picture evaluation result for proving diagnostic value showed that the anterior and posterior of shoulder heads and the anterior and posterior of glenoid fossa could be observed in the velpeau view; on the other hand, besides these areas acromioclavicular joint and coracoid process could be viewed in the modified velpeau view. This result verified that the modified velpeau view could replace the velpeau view for its diagnostic value as an examination method. This result, moreover, suggests that the modified velpeau view needs to be studied and improved from a variety of perspectives not only for an alternative for patients having troubles with the velpeau view position but also for clinical application of new test method for diagnosis of shoulder disorders other than dislocation of shoulder or fracture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.161-179
• /
• 1987

To study the mechanical behaviors of the margins of porcelain-fused-to-metal crown on the posterior teeth, 5 types of margins on the lower first molar were chosen, and then the finite element models were constructed. 50kg forces were applied to the porcelain on the axial wall supported by the metal vertically. The displacements and stresses of the porcelain-fused-to-metal crown were analyzed to investigate the influence of the type of margins. The results were as follows; 1. High tensile stresses were exhibited on the porcelain of the portion of the coronal line angle insufficient metallic support. 2. In case metal coping had a good supporting form to vertical force, uniform compressive stresses were exhibited on their supporting form. 3. Tensile stresses in the inframetallic margin on the series of the shoulder with a bevel margins were decreased in the bevel portion. 4. Principal stresses on the metal of the chamfer marginal portion were decreased comparing with the series of the shoulder margins. 5. The noticeable compressive stress gradients were exhibited between axial cement layer and metal on the series of the shoulder margins. 6. The principal stresses on the marginal cement layer were higher than that of the occlusal surface and axial wall.