• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.477-488
• /
• 2018

Fluid muds commonly occur in estuarine environments, but their ancient examples have rarely been studied in terms of depositional characteristics and processes. Cores of estuarine channel deposits of the Early Cretaceous McMurray Formation, Alberta, Canada show various mudstone layers that possess depositional characteristics of high clay-concentration flows. These mudstone layers are examined in detail through microscopic observation of thin sections and classified into three microfacies (<1 to 25 mm thick) on the basis of sedimentary texture and structures. Structureless mudstone (Microfacies 1) consists mainly of clay particles and contains randomly dispersed coarser grains (coarse silt to fine sand). This microfacies is interpreted as being deposited by cohesive mud flows, i.e., fluid muds, which possessed sufficient strength to support suspended coarser grains (quasi-laminar plug flow). Silt-streaked mudstone (Microfacies 2) mainly comprises mudstone with dispersed coarse grains and includes very thin, discontinuous silt streaks of coarse-silt to very-fine-sand grains. The texture similar to Microfacies 1 indicates that Microfacies 2 was also deposited by cohesive fluid muds. The silt streaks are, however, suggestive of the presence of intermittent weak turbulence under the plug (upper transitional plug flow). Heterolithic laminated mudstone (Microfacies 3) is characterized by alternation of relatively thick silt laminae and much thinner clay laminae. It is either parallel-laminated or low-angle cross-laminated, occasionally showing low-amplitude ripple forms. The heterolithic laminae are interpreted as the results of shear sorting in the basal turbulent zone under a cohesive plug. They may represent low-amplitude bed-waves formed under lower transitional plug flows. These three microfacies reflect a range of flow phases of fluid muds, which change with flow velocities and suspended mud concentrations. The results of this study provide important knowledge to recognize fluid-mud deposits in ancient sequences and to better understand depositional processes of mudstones.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.2
• /
• pp.125-135
• /
• 2010

To discover the main characteristics of Korean traditional flower arrangement, they were compared with different articles and old paintings used in royal court ceremonies. The primary research involved principle of design. The times periods used were the Joseon Dynasty era of Korea, the Ming era of China, and the Edo eras of Japan. The result, which shows both the similarities and differences, of the research is summarized as follows. The similarities were that they all respect the features of nature, and their image expresses their creator's thinking. There was one technique, called 'Suje', in which a part of the stem is coming out from one branch. Also, each three eras preferred flowering trees and ornamental trees more than annuals or foliage plants. one of the differences was that korea used a simple number of materials. The work had volume and appeared mild by using a soft curved line which was repetitive and massive. The Joseon Dynasty era advanced a sense of beauty with artistic symmetry and balance. The work seemed soft and natural because of the little change in blank space, with almost no angle of line. The form had a characteristic preference of being taller than the typical Japanese arrangement. It appeared simple, calm, and rustic by using only one kind of material. In contrast, the Chinese style was gorgeous and displayed volume in a non-symmetrical tripodal form, which incorporated various colors and materials. Also, they avoided processing the materials in order to emphasize the original beauty of nature. Chinese flower arts did not become formalized because they did not consider the formality seriously the formal. The Japanese style was also gorgeous because it incorporated various materials and angles. It included an extreme technique in which an artificial line divided the blank space delicately. The line was both strong and delicate in an established form. The restriction of the main branch gave a light feeling, as well as more strain as in a balance sense. The Japanese eras emphasized more the use of line and a sense of blank space.

• Korean Journal of Remote Sensing
• /
• v.12 no.2
• /
• pp.139-154
• /
• 1996

In order to evaluate the sensor`s look direction bias in the Landsat TM image and to estimate trends of primary geological lineaments, we have attempted to systematically compare lineaments in TM image, relief shadowed DEM's, and actual lineaments of geologic and topographic map through the Hough transform technique. Hough transform is known to be very effective to estimate the trend of geological lineaments, and help us to obtain the true trends of lineaments. It is often necessary to compensate the preferential enhancements of terrain lineaments in a TM image occurred by to look direction bias, and that can be achieved by utilizing an auxiliary data. In this study, we have successfully adopted the relief shadowed DEM in which the illuminating azimuth angle is perpendicular to look direction of a TM image for assessing true trends of geological lineaments. The results also show that the sum of four relief shadowed DEM's directional components can possibly be used as an alternative. In Euiseong-gun area where Sindong Group and Mayans Group are mainly distributed, geological lineaments trending $N5^{\circ}$~$10^{\circ}$W are dominant, while those of $N55^{\circ}$~$65^{\circ}$ W are major trends in Cheongsong-gun area where Hayang Group, Yucheon Group and Bulguksa Granite are distributed. Using relief shadowed DEM as an auxiliary data, we found the $N55^{\circ}$~$65^{\circ}$ W lineaments which are not cleanly observed in TM image over Euiseong-gun area. Compared with the trend of Gumchon and Gaum strike-slip faults, these lineaments are considered to be an extension of the faults. Therefore these strike-slip faults possibly extend up to Sindong Group in the northwest parts in the study area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.265-277
• /
• 2019

Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.

• Journal of the Korean earth science society
• /
• v.40 no.5
• /
• pp.447-463
• /
• 2019

Sea surface wind is a fundamental element for understanding the oceanic phenomena and for analyzing changes of the Earth environment caused by global warming. Global research institutes have developed and operated scatterometers to accurately and continuously observe the sea surface wind, with the accuracy of approximately ${\pm}20^{\circ}$ for wind direction and ${\pm}2m\;s^{-1}$ for wind speed. Given that the spatial resolution of the scatterometer is 12.5-25.0 km, the applicability of the data to the coastal area is limited due to complicated coastal lines and many islands around the Korean Peninsula. In contrast, Synthetic Aperture Radar (SAR), one of microwave sensors, is an all-weather instrument, which enables us to retrieve sea surface wind with high resolution (<1 km) and compensate the sparse resolution of the scatterometer. In this study, we investigated the Geophysical Model Functions (GMF), which are the algorithms for retrieval of sea surface wind speed from the SAR data depending on each band such as C-, L-, or X-band radar. We reviewed in the simulation of the backscattering coefficients for relative wind direction, incidence angle, and wind speed by applying LMOD, CMOD, and XMOD model functions, and analyzed the characteristics of each GMF. We investigated previous studies about the validation of wind speed from the SAR data using these GMFs. The accuracy of sea surface wind from SAR data changed with respect to observation mode, GMF type, reference data for validation, preprocessing method, and the method for calculation of relative wind direction. It is expected that this study contributes to the potential users of SAR images who retrieve wind speeds from SAR data at the coastal region around the Korean Peninsula.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.169-193
• /
• 2016

In order to characterize the Neotectonic crustal deformation and current stress field in and around the Korean Peninsula and to interpret their tectonic implications, this paper synthetically analyzes the previous Quaternary fault and focal mechanism solution data and recent geotechnical in-situ stress data and examines the characteristics of crustal deformations and tectonic settings in and around East Asia after the Miocene. Most of the Quaternary fault outcrops in SE Korea occur along major inherited fault zones and show a NS-striking top-to-the-west thrust geometry, indicating that the faults were produced by local reactivation of appropriately oriented preexisting weaknesses under EW-trending pure compressional stress field. The focal mechanism solutions in and around the Korean Peninsula disclose that strike-slip faulting containing some reverse-slip component and reverse-slip faulting are significantly dominant on land and in sea area, respectively. The P-axes are horizontally clustered in ENE-WSW direction, whereas the T-axes are girdle-distributed in NNW direction. The geotechnical in-situ stress data in South Korea also indicate the ENE-trending maximum horizontal stress. The current crustal deformation in the Korean Peninsula is thus characterized by crustal contraction under regional ENE-WSW or E-W compression stress field. Based on the regional stress trajectories in and around East Asia, the current stress regime is interpreted to have resulted from the cooperation of westward shallow subduction of the Pacific Plate and collision of Indian and Eurasian continents, whereas the Philippine Sea plate have not a decisive effect on the stress-regime in the Korean Peninsula due to its high-angle subduction that resulted in dominant crust extension of the back-arc region. It is also interpreted that the Neotectonic crustal deformation and present-day tectonic setting of East Asia commenced with the change of the Pacific Plate motion during 5~3.2 Ma.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.741-751
• /
• 2010

We evaluated the nutritional value of a Monascus pilosus mycelial ethanolic extract (MEM) and culture filtrate (CFM) by determining the contents of monacolin K and citrinin, and by measuring antioxidant and antimicrobial activities. The yields of freeze-dried MEM and CFM powder were 4.02% and 3.35% of wet weight, respectively. Pigment content ($OD_{500}$ value) of MEM (0.79) and CFM (0.63) were lower than those of commercial rice beni-koji ethanolic extracts (EERB) (0.87), but were in good agreement with the L*, a*, and b* values and the hue angles of the products. The total monacolin K content of MEM (24.91 mg%) was higher than those of CFM (1.27 mg%) and EERB (14.65 mg%). However, the active monacolin K content of EERB (5.48 mg%) was higher than those of MEM (3.35 mg%) and CFM (0.4 mg%). Citrinin was not detected in any sample. The total polyphenol content of MEM (4.68%, w/w) was similar to that of CFM (4.29%, w/w), thus 13.75.20.94% higher than that of EERB. The total flavonoid content of EERB was 6.8.7.0-fold higher than those of MEM (0.64%, w/w) and CFM (0.66%, w/w). The total antioxidant capacity of CFM (3.51%, w/w) was 1.62.2.08-fold higher than those of MEM (2.74%, w/w) and EERB (1.69%, w/w). The electron-donating capacities of 1% (w/v) solutions of CFM, MEM, BHT, and EERB were 86.20%, 77.25%, 77.25%, and 44.82%, respectively, and the corresponding reducing powers ($OD_{700}$ values) were 2.1, 2.4, 1.1, and 1.6, respectively. SOD(superoxide dismutase)-like activities were in the order MEM (39.85%) > BHT (37.68%) > EERB (26.70%) > CFM (21.5%). Although the TBARS (% value) of MEM was a little lower than that of BHT, it was higher than those of CFM and EERB. The antibacterial activities of CFM acting on Bacillus brevis and Escherichia coli were somewhat higher than those of MEM, whereas the activities of MEM on Bacillus subtilis, Listeria monocytogenes, Staphylococcus aureus, Staphylococcus epidermidis, and Salmonella enteritidis were higher than those of CFM. However, the antibacterial activities of MEM and CFM were less than those of EERB and BHT. In conclusion, although further studies are needed, we offer experimental evidence that the by-products of M. pilosus MEM and CFM contain significant antioxidant and antimicrobial activities that may be useful in the development of healthy foods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.6-11
• /
• 1989

This investigation was conducted to get basic informations on land consolidation works and soil management for arable land. The characteristics of geometrical features of mapping units in the detailed soil maps of Korea were measured from 70 soil series (565 soil phases) by using a picture analysis system. The results obtained were as follows: 1. The mean values of the mapping units in extent, periphery, diameter of long axis and short axis, roundness and number of acute angles were 22.0ha, 2.267m, 911m, 0.104, and 3.5, respectively. It was suggested that "Simplicity Index of Mapping Unit", $=\frac{Extent\;in\;ara}{Length\;of\;boundary\;periphery\;in\;meter}{\times}\frac{1}{number\;of\;acute\;angle}$ be valuable to judge the complexity degrees of mapping units. 2. The size of mapping unit among physiographyic position was shown in order of Alluvial plains > Fluviomarine plains > Terraces > Hills > Fans > Mt. foot slopes > Valleys, and the simplicity index of mapping units also showed similar order of the extent. 3. The size and the simplicity index of the soils developed on plains with silty textured imperfectly drained were higher than the soils developed on sloped land with loamy textured. As the slopes getting steeper or relatively better in soil drainage, the size and the simplicity index became smaller. 4. The relationship between the simplicity index and the size of the farm unit divides by the land consolidation works was positively correlated. And it was concluded that the parcelling of the farm unit divides by the planning of land consolidation should be based on the soil boundaries of the detailed soil maps for mechanized or collaborated farming.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.232-245
• /
• 2021

The present study is about a brand development strategy that utilizes Korean traditional patterns. The global culturenomics phenomenon confirms the value of the cultural aspects of design when a national brand is established. People succeed with their unique aesthetic sense and reinterpret it in a modern view, and this design acts as today's national brands. In this way, people used traditional patterns and original designs, along with regional characteristics and formative style, in developing their designs. However, due to recent changes in the global environment, modern people live in an "untact" world, and consumption culture shifted toward online marketing. In this environment, where one is isolated from social activities, there needs to be a strong image that can dramatically change the mood of one's home. I would like to re-examine the Dan-Chung pattern, whose painting depends on the aesthetic characteristics of architecture to protect the wooden members of the framework in traditional architecture. The pattern and color of Dan-Chung, coated in traditional architecture, differs by the type of construction used, which includes a palace, a Buddhist temple, and a Confucianism Dan Chung. The Geummoon pattern contains aesthetic factors to add solemnity to the Main Buddhist Halls, which contain Buddha. This is a new medium that continues the current traditions instead of remaining in the past. Among different Dan Chung patterns, Geummoon has magnificent decoration consisting of the highest grade materials and unique composition; therefore, it is suitable to be reinterpreted in modern terms. The same pattern can be interpreted in different ways with different colors, so there is a great aesthetic impression in the Geummoon pattern. The value of preservation for exploration and theoretical study of the traditional pattern is important, but recreating the pattern into modern formative art can present a new angle of view and national brand, bearing pride in our cultural assets. The study used multidimensional molding methods for realistic presentation after going through the two-dimensional design process. The significant value of Korean molding beauty which hangs onto the past will play a crucial role in establishing our national brand.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1295-1305
• /
• 2021

Satellite-derived ocean color products are required to effectively monitor clear open ocean and coastal water regions for various research fields. For this purpose, accurate correction of atmospheric effect is essential. Currently, the Geostationary Ocean Color Imager (GOCI)-II ground segment uses the reanalysis of meteorological fields such as European Centre for Medium-Range Weather Forecasts (ECMWF) or National Centers for Environmental Prediction (NCEP) to correct gas absorption by water vapor and ozone. In this process, uncertainties may occur due to the low spatiotemporal resolution of the meteorological data. In this study, we develop water vapor absorption correction model for the GK-2 combined GOCI-II atmospheric correction using Advanced Meteorological Imager (AMI) total precipitable water (TPW) information through radiative transfer model simulations. Also, we investigate the impact of the developed model on GOCI products. Overall, the errors with and without water vapor absorption correction in the top-of-atmosphere (TOA) reflectance at 620 nm and 680 nm are only 1.3% and 0.27%, indicating that there is no significant effect by the water vapor absorption model. However, the GK-2A combined water vapor absorption model has the large impacts at the 709 nm channel, as revealing error of 6 to 15% depending on the solar zenith angle and the TPW. We also found more significant impacts of the GK-2 combined water vapor absorption model on Rayleigh-corrected reflectance at all GOCI-II spectral bands. The errors generated from the TOA reflectance is greatly amplified, showing a large error of 1.46~4.98, 7.53~19.53, 0.25~0.64, 14.74~40.5, 8.2~18.56, 5.7~11.9% for from 620 nm to 865 nm, repectively, depending on the SZA. This study emphasizes the water vapor correction model can affect the accuracy and stability of ocean color products, and implies that the accuracy of GOCI-II ocean color products can be improved through fusion with GK-2A/AMI.