Browse > Article
http://dx.doi.org/10.14770/jgsk.2018.54.5.477

Fluid-mud deposits in the Early Cretaceous McMurray Formation, Alberta, Canada  

Oh, Juhyeon (Department of Earth and Environmental Sciences, Andong National University)
Jo, Hyung Rae (Department of Earth and Environmental Sciences, Andong National University)
Publication Information
Journal of the Geological Society of Korea / v.54, no.5, 2018 , pp. 477-488 More about this Journal
Abstract
Fluid muds commonly occur in estuarine environments, but their ancient examples have rarely been studied in terms of depositional characteristics and processes. Cores of estuarine channel deposits of the Early Cretaceous McMurray Formation, Alberta, Canada show various mudstone layers that possess depositional characteristics of high clay-concentration flows. These mudstone layers are examined in detail through microscopic observation of thin sections and classified into three microfacies (<1 to 25 mm thick) on the basis of sedimentary texture and structures. Structureless mudstone (Microfacies 1) consists mainly of clay particles and contains randomly dispersed coarser grains (coarse silt to fine sand). This microfacies is interpreted as being deposited by cohesive mud flows, i.e., fluid muds, which possessed sufficient strength to support suspended coarser grains (quasi-laminar plug flow). Silt-streaked mudstone (Microfacies 2) mainly comprises mudstone with dispersed coarse grains and includes very thin, discontinuous silt streaks of coarse-silt to very-fine-sand grains. The texture similar to Microfacies 1 indicates that Microfacies 2 was also deposited by cohesive fluid muds. The silt streaks are, however, suggestive of the presence of intermittent weak turbulence under the plug (upper transitional plug flow). Heterolithic laminated mudstone (Microfacies 3) is characterized by alternation of relatively thick silt laminae and much thinner clay laminae. It is either parallel-laminated or low-angle cross-laminated, occasionally showing low-amplitude ripple forms. The heterolithic laminae are interpreted as the results of shear sorting in the basal turbulent zone under a cohesive plug. They may represent low-amplitude bed-waves formed under lower transitional plug flows. These three microfacies reflect a range of flow phases of fluid muds, which change with flow velocities and suspended mud concentrations. The results of this study provide important knowledge to recognize fluid-mud deposits in ancient sequences and to better understand depositional processes of mudstones.
Keywords
fluid mud; microfacies; depositional process; estuarine deposits; McMurray Formation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Cant, D.J., 1996, Sedimentological and sequence stratigraphic organization of a foreland clastic wedge, Mannville Group, Western Canada Basin. Journal of Sedimentary Research, 66, 1137-1147.
2 Hein, F.J., Cotterill, D.K. and Berhane, H., 2000, An Atlas of Lithofacies of the McMurray Formation, Athabasca Oil Sands Deposit, Northeastern Alberta: Surface and Subsurface. Earth Sciences Report 2000-07, Alberta Energy and Utilities Board/Alberta Geological Survey, Edmonton, 216 p.
3 Hovikoski, J., Therkelsen, J., Nielsen, L.H., Bojesen-Koefoed, J.A., Nytoft, H.P., Petersen, H.I., Abatzis, I., Tuan, H.A., Phuong, B.T.N., Dao, C.V. and Fyhn, M.B.W., 2016, Density-flow deposition in a fresh-water lacustrine rift basin, Paleogene Bach Long Vi Graben, Vietnam. Journal of Sedimentary Research, 86, 982-1007.   DOI
4 Hubbard, S.M., Smith, D.G., Nielsen, H., Leckie, D.A., Fustic, M., Spencer, R.J. and Bloom, L., 2011, Seismic geomorphology and sedimentology of a tidally influenced river deposit, Lower Cretaceous Athabasca oil sands, Alberta, Canada. American Association of Petroleum Geologists Bulletin, 95, 1123-1145.   DOI
5 Ichaso, A.A. and Dalrymple, R.W., 2009, Tide- and wave-generated fluid mud deposits in the Tilje Formation (Jurassic), offshore Norway. Geology, 37, 539-542.   DOI
6 Musial, G., Reynaud, J.-Y., Gingras, M.K., Fenies, H., Labourdette, R. and Parize, O., 2012, Subsurface and outcrop characterization of large tidally influenced point bars of the Cretaceous McMurray Formation (Alberta, Canada). Sedimentary Geology, 279, 156-172.   DOI
7 Nardin, T.R., Feldman, H.R. and Carter, B.J., 2013, Stratigraphic architecture of a large-scale point-bar complex in the McMurray Formation: Syncrude's Mildred Lake Mine, Alberta, Canada. In: Hein, F.J., Leckie, D., Larter, S. and Suter, J.R. (eds.), Heavy-Oil and Oil-Sand Petroleum Systems in Alberta and Beyond. AAPG Studies in Geology 64, 273-311.
8 Plint, A.G., 2014, Mud dispersal across a Cretaceous prodelta: storm-generated, wave-enhanced sediment gravity flows inferred from mudstone microtexture and microfacies. Sedimentology, 61, 609-647.   DOI
9 Dalrymple, R.W. and Choi, K.S., 2007, Morphologic and facies trends through the fluvial-marine transition in tide-dominated depositional systems: a schematic framework for environmental and sequence-stratigraphic interpretation. Earth-Science Reviews, 81, 135-174.   DOI
10 Dalrymple, R.W. and Choi, K.S., 2003, Sediment transport by tidal currents. In: Middleton, G.V. (ed.), Encyclopedia of Sediments and Sedimentary Rocks. Kluwer Academic Publishers, Dordrecht, 606-609.
11 Dyer, K.R., 1995, Sediment transport processes in estuaries. In: Perillo, G.M.E. (ed.), Geomorphology and Sedimentology of Estuaries. Elsevier, Amsterdam, 423-449.
12 Flach, P.D., 1984, Oil Sands Geology-Athabasca deposit north. Bulletin 46, Alberta Research Council, Edmonton, 31 p.
13 Flach, P.D. and Mossop, G.D., 1985, Depositional environments of Lower Cretaceous McMurray Formation, Athabasca oil sands, Alberta. The American Association of Petroleum Geologists Bulletin, 69, 1195-1207.
14 Ghadeer, S.G. and Macquaker, J.H.S., 2011, Sediment transport processes in an ancient mud-dominated succession: a comparison of processes operating in marine offshore settings and anoxic basinal environments. Journal of the Geological Society, London, 168, 1121-1132.   DOI
15 Hein, F.J. and Cotterill, D.K., 2006, The Athabasca oil sands-a regional geological perspective, Fort McMurray area, Alberta, Canada. Natural Resources Research, 15, 85-102.   DOI
16 Jo, H.R. and Ha, C.G., 2013a, Stratigraphic architecture of fluvial deposits of the Cretaceous McMurray Formation, Athabasca oil sands, Alberta, Canada. Geosciences Journal, 17, 417-427.   DOI
17 Jo, H.R. and Ha, C.G., 2013b, Basal water-bearing zone of the oil-sands deposits of the Cretaceous McMurray Formation at Christina Lake, Alberta, Canada. Geosciences Journal, 17, 445-453.   DOI
18 Leckie, D.A. and Smith, D.G., 1992, Regional setting, evolution, and depositional cycles of the Western Canada foreland basin. In: Macqueen, R.W. and Leckie, D.A. (eds.), Foreland Basins and Fold Belts. American Association of Petroleum Geologists, Memoir, 55, 9-46.
19 Shinn, Y.J., Lee, H.S., Kwon, Y.K. and Kwak, W.J., 2014, Lithofacies distribution and depositional environment in the Lower Cretaceous McMurray Formation, BlackGold Lease, northern Alberta: implications for geometry and distribution of oil sand reservoirs. Geosciences Journal, 18, 325-337.   DOI
20 Ranger, M.J. and Pemberton, S.G., 1997, Elements of a stratigraphic framework for the McMurray Formation in south Athabasca area, Alberta. In: Pemberton, S.G. and James, D.P. (eds.), Petroleum Geology of the Cretaceous Mannville Group, Western Canada. Canadian Society of Petroleum Geologists, Memoir, 18, 263-291.
21 Soyinka, O.A. and Slatt, R.M., 2008, Identification and micro-stratigraphy of hyperpycnites and turbidites in Cretaceous Lewis Shale, Wyoming. Sedimentology, 88, 1117-1133.
22 Stockmal, G.S., Cant, D.J. and Bell, J.S., 1992, Relationship of the stratigraphy of the Western Canada foreland basin to Cordilleran tectonics: insights from geodynamic models. In: Macqueen, R.W. and Leckie, D.A. (eds.), Foreland Basins and Fold Belts. American Association of Petroleum Geologists, Memoir, 55, 107-124.
23 Baas, J.H. and Best, J.L., 2002, Turbulence modulation in clay-rich sediment-laden flows and some implications for sediment deposition. Journal of Sedimentary Research, 72, 336-340.   DOI
24 Talling, P.J., Masson, D.G., Sumner, E.J. and Malgesini, G., 2012, Subaqueous sediment density flows: depositional processes and deposit types. Sedimentology, 59, 1937-2003.   DOI
25 Wang, Z. and Larsen, P., 1994, Turbulent structure of water and clay suspensions with bed load. Journal of Hydraulic Engineering, 120, 577-600.   DOI
26 Wightman, D.M. and Pemberton, S.G., 1997, The Lower Cretaceous (Aptian) McMurray Formation: an overview of the Fort McMurray area, northeastern Alberta. In: Pemberton, S.G. and James, D.P. (eds.), Petroleum Geology of the Cretaceous Mannville Group, Western Canada. Canadian Society of Petroleum Geologists, Memoir, 18, 312-344.
27 Alberta Energy and Utilities Board (AEUB), 2007, Alberta's Energy Reserves 2006 and Supply/Demand Outlook 2007-2016. ST98-2007, Alberta Energy and Utilities Board, Calgary, 218 p.
28 Allen, G.P., Salomon, J.C., Bassoullet, P., Du Penhoat, Y. and De Grandpre, C., 1980, Effects of tides on mixing and suspended sediment transport in macrotidal estuaries. Sedimentary Geology, 26, 69-90.   DOI
29 Baas, J.H., Best, J.L. and Peakall, J., 2011, Depositional processes, bedform development and hybrid bed formation in rapidly decelerated cohesive (mud-sand) sediment flows. Sedimentology, 58, 1953-1987.   DOI
30 Baas, J.H., Best, J.L. and Peakall, J., 2016, Predicting bedforms and primary current stratification in cohesive mixtures of mud and sand. Journal of the Geological Society, London, 173, 12-45.   DOI
31 Baas, J.H., Best, J.L., Peakall, J. and Wang, M., 2009, A phase diagram for turbulent, transitional, and laminar clay suspension flows. Journal of Sedimentary Research, 79, 162-183.   DOI
32 Mossop, G.D. and Flach, P.D., 1983, Deep channel sedimentation in the Lower Cretaceous McMurray Formation, Athabasca Oil sands, Alberta. Sedimentology, 30, 493-509.   DOI
33 Hein, F.J., 2015, The Cretaceous McMurray oil sands, Alberta, Canada: a world-class, tidally influenced fluvial-estuarine system-an Alberta government perspective. In: Ashworth, P.J, Best, J.L. and Parsons, D.R. (eds.), Fluvial-Tidal Sedimentology. Developments in Sedimentology, 68, Elsevier, Amsterdam, 561-621.
34 Crerar, E.E. and Arnott, R.W.C., 2007, Facies distribution and stratigraphic architecture of the Lower Cretaceous McMurray Formation, Lewis Property, northeastern Alberta. Bulletin of Canadian Petroleum Geology, 55, 99-124.   DOI
35 Lee, H.S., Park, C.H., Shinn, Y.J., Lee, H.Y., Jeong, S.H., Hong, S.K., Yang, I.H., Kim, G.H., Shin, H., Rhee, C.W., Park, E.K., Jeong, J.A. and Jo. H.R., 2015, Technology in Oil Sands Development. Korea Institute of Geoscience and Mineral Resources, 240 (in Korean).
36 Mackay, D.A. and Dalrymple, R.W., 2011, Dynamic mud deposition in a tidal environment: the record of fluid-mud deposition in the Cretaceous Bluesky Formation, Alberta, Canada. Journal of Sedimentary Research, 81, 901-920.   DOI
37 McAnally, W.H., Friedrichs, C., Hamilton, D., Hayter, E., Shrestha, P., Rodriguez, H., Sheremet, A. and Teeter, A., 2007, Management of fluid mud in estuaries, bays, and lakes. I: present state of understanding on character and behavior. Journal of Hydraulic Engineering, 133, 9-22.   DOI