• 한방재활의학과학회지
• /
• 제24권4호
• /
• pp.163-176
• /
• 2014

Objectives To investigate the relationship of forward head posture to heart rate variability and standing posture (pelvic tilt, knee flexion, calcaneal eversion). Methods In the present study, thirty two subjects were recruited by convenience sampling. The forward head posture was measured via the craniovertebral (CV) angle. The pelvic tilt angle, the knee flexion angle, the calcaneal eversion angle, and the heart rate variability were measured. The correlations of forward head posture to heart rate variability and standing posture (pelvic tilt, knee flexion, calcaneal eversion) were analyzed. Results In the present results, there was a significant negative correlation between X-ray CV angle and other regions except the headache. There was a weak positive correlation between Posture CV angle and SDNN. Significant positive correlation was found between KFA and difference between Lt. & Rt. CEA. Significant weak negative correlation was found between SDNN and difference between Lt. & Rt. CEA. Conclusions Biomechanical associated with physical pain and heart rate variability, and it is related to the forward head posture changes and also suggest that clinical care is needed for this.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.67-85
• /
• 2017

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on the shear capacity are discussed in details. Based on the numerical analyses, two equations are proposed to estimate the ultimate capacity of tilted angle shear connectors of 112.5 and 135 degrees in the defined range of parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.986-992
• /
• 2014

This research investigates experimentally and numerically the tilting angle, eccentricity ratio, flying height of axial direction, friction torque, and critical mass of the HDD disk-spindle system due to HDD positioning angle. The tilting angle and the eccentricity ratio are the maximum when the HDD positioning angle is $90^{\circ}$ respect to horizontal position because the external force in radial direction and the torque applied to the rotating part are the maximum when the HDD positioning angle is $90^{\circ}$. The flying height increases with the increase of the HDD positioning angle because the direction of gravity applied to the rotating part changes. The friction torque increases with the increase of the HDD positioning angle until it becomes $60^{\circ}$, and decreases with the increase of the HDD positioning angle after it becomes $60^{\circ}$. The stability is the maximum when the HDD positioning angle is $90^{\circ}$.

• 한국운동역학회지
• /
• 제29권4호
• /
• pp.219-226
• /
• 2019

Objective: The purpose of this study is to provide a better understanding of short turn mechanism by describing short turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (ski-hip angle, ski-shoulder twist angle, pole checking angle, the center of gravity (CG) displacement, trunk forward lean angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for short turns. Results: There was no difference in a ski-hip twist angle. The ski-shoulder twist angle was large at the up-start point while a pole-checking angle was high at the down-end point in skilled skiers. Concerning the horizontal displacement of CG, skilled skiers were positioned on the right side at the upstart point. No significant difference was observed in the trunk forward lean angle. Conclusion: According to the ski-shoulder twist angle and CG horizontal displacement results, the upper body should be kept leant toward the pole. In addition, big turns should be made via edging and angulation. During pole checking, the hand holding the pole should be thrown and released toward a vector direction of the forearm.

• 한방재활의학과학회지
• /
• 제15권2호
• /
• pp.183-191
• /
• 2005

Objectives : The 5th lumbar - 1st sacrum facet joint is unstable area from an anatomical viewpoint, so that it is clinically major causes of low back pain. The purpose of this study is to assess the difference of the Van Akkerveeken measurement and intervertebral disc angle, Ferguson angle betwoon the 5th lumbar - 1st sacrum facet syndrome patients and sample group patients.Methods : Van Akkerveeken measurement, intervertebral disc angle and Ferguson angle were measured in 30 patients who had 5th lumbar - 1st sacrum facet syndrome and 31 sample group patients.Results :1. Van Akkerveeken measurement of 5th lumbar - 1st sacrum facet syndrome patients is statistically larger that of than sample group patients.2. Intervertebral disc angle of the 5th lumbar - 1st sacrum facet syndrome patients is statistically larger that of than sample group patients.3. Ferguson angle is the 5th lumbar - 1st sacrum facet syndrome patients is statistically larger than that of sample group patients.Conclusions : These results suggest that Van Akkerveeken measurement and intervertebral disc angle is able to be used for diagnosis of facet syndrome.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

Rifling Force can be described with projectile velocity, gas pressure and rifling angle, etc. Under the same conditions, the character of the rifling angle decisively influences the rifling force. To reduce the harmful effect, locally distinct maximum of rifling force has to be avoided. The optimal design methodology of rifling angle curve had been developed by combined Fourier series and polynomial function. When it was tried newly to design the rifling angle curve, this design trial caused not to produce the lower rifling force than the existing design. Normally, the curve of the rifling angle is designed first, then the rifling force is set according to the rifling angle curve. However during the cause analysis, new design methodology was established to design the ideal rifling force curve before the rifling angle design. With this new methodology, the above optimal design method was analyzed and its limitation was confirmed.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1459-1466
• /
• 2004

The purpose of this study is to investigate the effect of swirler angle and the aspect ratio of swirl chamber of nozzle on the characteristics of single and twin spray. The characteristics of sprays have been investigated by measuring the spray angle, droplet size and velocity. Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the spray angle was increased with increasing the swirler angle. For both sprays, the axial velocity and SMD were decreased with increasing the swirler angle. It was also shown that the axial velocity and SMD were decreased with increasing the aspect ratio of swirl chamber, but for the twin spray, the axial velocity and SMD were not influenced significantly by the changing the aspect ratio of swirl chamber. The effect of swirler angle on the spray characteristics was greater than the aspect ratio of swirl chamber for single spray. The nozzle pitch was one of the important factors affecting the spray characteristics of twin spray.

• 한국분무공학회지
• /
• 제10권4호
• /
• pp.1-7
• /
• 2005

The purpose of this study is to investigate the effect of swirler vane angle and the aspect ratio of swirl chamber of nozzle on the characteristics of single spray. The characteristics of sprat's have been investigated by measuring the spray angle, droplet size and velocity Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the spray angle was increased with increasing the swirler angle. For both sprays, the axial velocity and SMD were decreased with increasing the swirler vane angle. It was also shown that the axial velocity and SMD were decreased with increasing the aspect ratio of swirl chamber The effect of vane angle un the spray characteristics was greater than the aspect ratio of swirl chamber for single spray.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.180-187
• /
• 2018

In this study, we develop a prediction method of cavity shape taking gravity effect and angle of attack of cavitator into consideration simultaneously. Logvinovich's theoretical formulas are superimposed to predict the change of cavity centerline due to both gravity effect and angle of attack of cavitator. It is found that as the angle of attack of cavitator increases, the gravity effect is weakened due to decrease in cavity volume, and even in case of the same angle of attack, cavity shape changes in different ways depending on whether the angle of attack of cavitator is positive or negative. We conclude that cavity shapes are largely affected by the angle of attack of cavitator, and the gravity effect and angle of attack of cavitator should be considered at the same time for the prediction of cavity shape.

• 대한물리의학회지
• /
• 제4권2호
• /
• pp.117-124
• /
• 2009

Purpose：The purpose of this study was to investigate of the change of the forward head posture(FHP) according to computer using time. Methods：Subjects were 30 male and 30 female. The factors of FHP were measured cranial vertical angle, cranial rotation angle, and head, upper back, neck flexion/extension angle according to computer using time. Change of FHP used to Digital Inclinometry(JTech, Dualer IQTM Dual Inclinometer). The data were collected by data logger(Logger Teknologi HB, Akarp, Sweden). Results：Cranial vertical angle, cranial rotation angle, and head, upper back, neck flexion/extension were increased according to computer using time(p<.05). But cranial vertical angle and cranial rotation angle, and head, upper back, neck flexion/extension were not significant differences between male and female group(p>.05). Conclusion：The effects of cranial vertical angle, cranial rotation angl and head, neck and upper back angle depend on the computer task time. Increased of FHP may result increased tension in posture muscles of cervical spine, resulting in a risk of musculoskeletal disorders.