Effect of the Swirler Angle and Aspect Ratio of Nozzle on the Mean Velocity and SMD of Twin Sprays |
Kim, Young-Jin
(부산대학교 대학원 기계공학과)
Jung, Ji-Won (부산대학교 기계기술연구소) Choi, Gyoung-Min (부산대학교 기계공학부) Kim, Duck-Jool (부산대학교 기계공학부) |
1 | Yule, A. J. and Widger, I. R., 1996, 'Swirl Atomizers Operating at High Water Pressure,' International Journal of Mechanical Sciences, Vol. 38, No.8, pp. 981-1000 DOI ScienceOn |
2 | Iciek, J., 1982, 'The Hydrodynamics of a Free, Liquid Jet and Their Influence on Direct Contact Heat Transfer-I. Hydrodynamics of a Free, Cylindrical Liquid Jet,' Int. J. Multiphase Flow, Vol. 8, No.3, pp. 239-249 DOI ScienceOn |
3 | Choi, Y. C., Jung, J. W. and Kim, D. J., 2001, 'Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid. Properties and Nozzle Geometries,' Trans. of the KSME (B), Vol. 25, No. 12, pp. 1813-1820 |
4 | Jung, J. W., Cha, K. J. and Kim, D. J., 2000, 'Characteristics of the Droplet Behavior in the Overlap Region of Twin Spray and in Single Spray,' Trans. of the KSME (B), Vol. 24, No. 10, pp. 1300-1308 |
5 | Jung, J. W. and Kim, D. J., 2004, 'A Study on Effect of Spray Characteristics on Etching Characteristics in Micro Fabrication System,' Trans. of the KSME (B), Vol. 28, No.1, pp. 109-117 |
6 | Jung, J. W., Kim, Y. J. and Kim, D. J., 2004, 'Correlation Between Spray Characteristics and Etching Characteristics in Twin Spray,' Trans. of KSME (B), Vol. 28, No.4, pp. 449-455 |
7 | Koo, J. Y., Joseph, S. S. and Goto, S., 1997 'Influence of Fuel Injector Nozzle Geometry on Internal and External Flow Characteristics,' American Technical Publishers Ltd., Vol. 106, No.3, pp. 568-580 |
8 | Hiroyasu, H., Shimizu, M. and Arai, M., 1982, 'The Breakup of High Speed Jet in a High Pressure Gaseous Atmosphere,' Proceedings of the 2nd International Conference on Liquid Atomization and Spray Systems, Madison, Wis., pp. 69-74 |
9 | Arai, M., Shimizu, M. and Hiroyasu, H., 1985, 'Breakup Length and Spray Angle of High Speed Jet,' Proceedings of 3rd International Conference on Liquid Atomization and Spray Systems, London, pp. 1-10 |
10 | Jung, J. W. and Kim, D. J., 2004, 'A Study on Improvement of Etching Characteristics by Spray Characteristics Analysis with Nozzle Geometries in Wet Etching Process,' Trans. of the KSME (B), Vol. 28, No.7, pp. 842-849 |
11 | Mrsa, Z. and Medic, G., 1998, 'Shape Optimization Method for Nozzle Design,' Computer Assisted Mechanics and Engineering Sciences, Vol. 5, pp. 45-54 |
12 | Marshall, W. R., 1954, 'Atomization and Spray Drying,' Chem. Eng. Prog. Monogr. Ser., No.2, Vol. 50, pp. 1-26 |
13 | McCarthy, M. J. and Molloy, N. A., 1974, 'Review of Stability of Liquid Jets and the Influence of Nozzle Design,' Chern. Eng. J., Vol. 7, pp. 1-20 DOI ScienceOn |
14 | Lichtarowicz, A., Duggins, R. K. and Markland, E., 1965, 'Coefficients for Incompressible Non -Cavitating Flow Through Long Orifices,' J. Mech. Eng. Sci., Vol. 7, No.2, pp. 210-219 DOI |