• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.12
• /
• pp.854-861
• /
• 1988

The current source inverter-fed induction motor(CSIM) drive is widely used in industry because of its four quadrant operation, fuseless protection, fuseless protection, and ruggedness. the CSIM drive system, however, has shortcomins such as slow response and dynamic stability to load torque disturbance and reference speed change. Such a disadvantages can be compensated considerably by means of introducing additional angle angle control loop. The angle control method is dependent upon the inverter type. In this paper, simultaneus recovery and commutation inverter(SRCI) which is developed recently is considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.232-232
• /
• 2000

switched reluctance motors and drives are increasingly used in industrial applications due to their robust mechanical structure, low inertia and reduction in the rotor losses. As the motor speed increase turn on angle must be advanced to build up phase current. When C-dump converter is applied to switched reluctance motor, the capacitance of dump C has to have proper value. In this paper advance angle for a switched reluctance motor and capacitance of dump C are investigated. Then proper advance angle and the capacitance of dump-C are propose for the industrial low voltage SR motor.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.27-31
• /
• 2017

이번 연구에서는 초발수 재료의 주요 특징 중 하나인 Sliding Angle에 관한 연구이다. 초발수 특성을 지닐수록 낮은 Sliding Angle을 가지고 있다. 하지만 특정 소재에 관해서만 Sliding Angle이 연구가 되어 있고, 접촉각의 변화에 따른 Sliding Angle의 경향성에 관한 연구는 거의 없다. 따라서 이번 실험에서는 접촉각 변화와 기판의 기울기에 따른 액체의 미끄러짐에 대한 특성들을 조사하였다. 그 결과 낮은 접촉각에서도 약간의 미끄러짐이 있음을 관찰할 수 있었다.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.81-87
• /
• 2006

This study has been conducted to predict the ultimate moment capacities of double angle connections with various angle thicknesses and bolt gage distances. Considering the results of experimental tests conducted previously, a simplified analytical model is suggested in this research. In addition, some basic data are also provided for structural engineers to design a double angle connection preliminary.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.271-278
• /
• 1999

An alternative panel flutter approach utilizing minimum angle is presented. The minimum angle is the lowest value among the angles between modes i and j at a certain pressure condition. This method utilizes eigenvectors rather than eigenvalues. Cross-ply composite plates are considered in this study. A remarkable result of this investigation is that the angle always dropped gradually to zero for all presented examples

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.399-400
• /
• 2020

본 논문은 Sensored BLDC 모터의 제어방법을 설명하고, 효율적인 최적 제어를 하기위해 Lead Angle 제어를 하는 방법에 대하여 설명하였다. Lead Angle 값을 실시간 Auto Tuning 하는 기법을 설계 및 구현하였다. 실제 Microchip 사의 DSC를 사용하여 Software로 동작을 구현하였으며, PWM 스위칭 하기 위한 반도체 소자는 IGBT 모듈인 IPM을 사용하여 BLDC 모터의 구동회로인 인버터를 구성하였다. 실제 사용하는 400W급 BLDC 모터를 사용하여 Lead Angle 제어와 Auto Tuning 실험결과를 비교 검증하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1366-1369
• /
• 2008

We introduce new instrument that provides the spectral radiance at any incidence and azimuth angle in all the visible range. LCD emission and transmittance properties of display components can be measured precisely at each incidence and azimuth angle and wavelength. Full polarization spectral analysis can be also made.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.987-988
• /
• 2009

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.76-79
• /
• 2007

Optical compensation films are widely used to enlarge viewing angle characteristics for LCDs. A new surface film with an inner light scattering layer was newly developed to improve gray scale inversion. This paper describes technologies regarding these films that enhance the viewing angle characteristics for LCDs.

• Journal of radiological science and technology
• /
• v.31 no.4
• /
• pp.379-387
• /
• 2008

Among methods to eliminate aliasing effects, the method of increasing velocity scale gradually eliminated the phenomenon in which the direction of the blood flow appeared in reverse. It was done by increasing the velocity scale while maintaining other parameters in the same state. The method of setting the Doppler angle to $0^{\circ}$ did not show significant changes in the wave pattern of the spectrum according to the angle. In actual ultrasonography tests, more accurate tests are expected to be carried out by applying variations to the velocity scale under the considerations of speed, accuracy, and convenience of the examination. The results showed that blood flow velocity increases exponentially according to the Doppler Angle. When the angle goes over $70^{\circ}$, the velocity value increases to an unmeasurable state. This indicates that in blood flow velocity measurements, the blood flow velocity is very dependent on the Doppler Angle. It also shows that the error increases when the incidence angle to the direction of blood flow exceeds $60^{\circ}$, and when the angle exceeds $70^{\circ}$, the error becomes even greater. In addition, he experiment results showed that an angle below $60^{\circ}$ is appropriate and for blood flow velocity measurements in extremity vessels, the most appropriate Doppler Angle is from $45^{\circ}$ to $60^{\circ}$.