• Advances in aircraft and spacecraft science
• /
• 제4권6호
• /
• pp.679-699
• /
• 2017

The aim of this study is to perform a finite element analysis of the Von Mises stresses distribution in the adhesive layer and of the J-Integral for a damaged plate repaired by a composite patch. Firstly, we study the effect of the fiber orientation, especially the position of the layers that have orientation angle different of $0^{\circ}$ from the first layer which is in all cases of our study oriented at ($0^{\circ}$) on the J-Integral. Secondly, we evaluate the effects of the mechanical properties of the patch and the use of a hybrid patch on the reduction of stresses distribution and J-Integral. The results show clearly that the stacking sequence for the composite patch must be selected to absorb optimally the stresses from the damaged area and to position the various layers of the composite under the first layer whose fibers orientation will remain in all cases equal to $0^{\circ}$. The use of a hybrid composite reduces significantly the J-Integral and the stresses in both damaged plate and the adhesive layer.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.51.2-51.2
• /
• 2011

A novel electrospun nanofiber membrane was fabricated using combined poly (vinylphosphonic acid) (PVPA) and polyvinyl alcohol (PVA) intended for bone tissue engineering applications. PVPA is a proton-conducting polymer used as primer for bone implants and dental cements to prevent corrosion and brush abrasion. The phosphonate groups of PVPA have the ability to crosslink and attach itself to the hydroxyapatite surface facilitating faster integration of the biomaterial to the bone matrix. PVA was combined with PVPA to provide hydrophilicity, biocompatibility and improve its spinnability. To improve its mechanical strength, PVPA/PVA and neat PVA mixtures were combined to produce a multilayer scaffold. The physical and chemical properties of the of the fabricated matrix was investigated by SEM and TEM morphological analyses, tensile strength test, XRD, FT-IR spectra, swelling behavior and biodegradation rates, porosity and contact angle measurements. Biocompatibility was also examined in vitro by cytotoxicity and cell proliferation studies with MTT assay and cell adhesion behavior by SEM and confocal microscopy.

• 한국재료학회지
• /
• 제4권2호
• /
• pp.233-240
• /
• 1994

Pt/Co인공격자다층막($[Pt10.7\;{\AA}/Co2.8\;{\AA}]{\times}12$)의 자기특성 및 기록특성이 시료제작시의 조건 (sputtering gas압력, sputtering gas 종류, buffer층의 유무 및 etching)에 따라 어떻게 변화하는지를 알아보았다. Pt/Co다층막의 자기특성은 Tb-Fe-Co계 아몰퍼스재료와 거의 동등한 특성이 얻어졌으며 이다층막을 이용한 광자기디스크의 기록특성은 kerr회전각, 1.23도, 기록 power 특성, 36dB(레이저파장: 780nm)을 나타내어 Pt/Co다층막이 차세대광자기디스크용 재료로서의 실용화가능성을 보여주었다.

• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.110-115
• /
• 2004

The prosthesis of current commercialized apparatus has considerable problems, requiring improvement. Especially, LLP(Lower Limb Prosthesis)-related problems have improved, but it cannot provide normal walking because, mainly, the gait control of the LLP does not fit with patient's gait manner. To solve this problem, HCI((Human Computer Interaction) that adapts and controls LLP postures according to patient's gait manner more effectively is studied in this research. The proposed control technique has 2 steps： 1) the multilayer neural network forecasts angles of gait of LLP by using the angle of normal side of lower limbs； and 2) the adaptive neural controller manages the postures of the LLP based on the predicted joint angles. According to the experiment data, the prediction error of hip angles was 0.32［deg.］, and the predicted error of knee angles was 0.12［deg.] for the estimated posture angles for the LLP. The performance data was obtained by applying the reference inputs of the LLP controller while walking. Accordingly, the control performance of the hip prosthesis improved by 80% due to the control postures of the LLP using the reference input when comparing with LQR controller.

• Macromolecular Research
• /
• 제10권1호
• /
• pp.2-12
• /
• 2002

The small-angle X-ray scattering (SAXS) beamline BL4C1 at the 2.5 GeV storage ring of the Pohang Accelerator Laboratory (PAL) has been in its first you of operation since August 2000. During this first stage it could meet the basic requirements of the rapidly growing domestic SAXS user community, which has been carrying out measurements mainly on various polymer systems. The X-ray source is a bending magnet which produces white radiation with a critical energy of 5.5 keV. A synthetic double multilayer monochromator selects quasi-monochromatic radiation with a bandwidth of ca. 1.5%. This relatively low degree of monochromatization is sufficient for most SAXS measurements and allows a considerably higher flux at the sample as compared to monochromators using single crystals. Higher harmonics from the monochromator are rejected by reflection from a flat mirror, and a slit system is installed for collimation. A charge-coupled device (CCD) system, two one-dimensional photodiode arrays (PDA) and imaging plates (IP) are available its detectors. The overall performance of the beamline optics and of the detector systems has been checked using various standard samples. While the CCD and PDA detectors are well-suited for diffraction measurements, they give unsatisfactory data from weakly scattering samples, due to their high intrinsic noise. By using the IP system smooth scattering curves could be obtained in a wide dynamic range. In the second stage, stating from August 2001, the beamline will be upgraded with additional slits, focusing optics and gas-filled proportional detectors.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.575-585
• /
• 2008

There are two beamlines (BLs), 4C1 and 4C2, at the Pohang Accelerator Laboratory that are dedicated to small angle X-ray scattering (SAXS). The 4C1 BL was constructed in early 2000 and is open to public users, including both domestic and foreign researchers. In 2003, construction of the second SAXS BL, 4C2, was complete and commissioning and user support were started. The 4C2 BL uses the same bending magnet as its light source as the 4C1 BL. The 4C1 BL uses a synthetic double multilayer monochromator, whereas the 4C2 BL uses a Si(111) double crystal monochromator for both small angle and wide angle X-ray scattering. In the 4C2 BL, the collimating mirror is positioned behind the monochromator in order to enhance the beam flux and energy resolution. A toroidal focusing mirror is positioned in front of the monochromator to increase the beam flux and eliminate higher harmonics. The 4C2 BL also contains a digital cooled charge coupled detector, which has a wide dynamic range and good sensitivity to weak scattering, thereby making it suitable for a range of SAXS and wide angle X-ray scattering experiments. The general performance of the 4C2 BL was initially tested using standard samples and further confirmed by the experience of users during three years of operation. In addition, several grazing incidence X-ray scattering measurements were carried out at the 4C2 BL.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.61-61
• /
• 2011

지구 온난화로 인해 환경파괴, 병원성 세균 감염 등에 의한 각종 질병과 아토피 피부염 등 수없이 많은 요소들에서 우리 몸을 보호하기 위하여 친환경 소재의 용품들이 각광 받고 있다. 이중에서도 키토산과 칼슘알지네이트는 천연재료로써 이미 다른 분야에서 응용되어 사용되고 있으며, 이 두 가지 천연재료를 두 층으로 면섬유에 코팅시킨 CCAC섬유를 제조하였다. CCAC섬유와 키토산이 코팅된 면섬유, 칼슘알지네이트가 코팅된 면섬유, 미처리 면섬유의 총 4가지 섬유에 체액, 증류수, 생리식염수의 각각의 조건에서 흡습량, 흡습시간을 측정하여 비교하고, 수분율과 함수율을 측정하고, 접촉각을 Contact angle system OCA20을 이용하여 측정하였다. CCAC섬유의 키토산 부착 함량을 알아보기 위하여 정량적인 방법으로 add-on율을 이용하여 확인하고, 정성적인 방법으로 원소분석기(Elemental Analyzer, FLASH 1112)를 이용하여 측정하였다. 칼슘알지네이트의 함량 분석은 EDS(EX-250, HORIBA, Japan)를 이용하여 측정하고, 직물의 표면과 단면의 형태는 주사전자현미경(S-4100, Hitachi Co., Japan)으로 ${\times}100$, ${\times}1000$ 배율로 측정하여 단면과 표면 상태를 확인하고, 물리적인 특성은 KES-FB system 을 통하여 확인 하였다.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1323-1329
• /
• 2015

The WO₃/Ag/WO₃ transparent thin films are fabricated by the RF magnetron sputtering. This has a transmittance of front and rear about 90% in the visible light range and surface resistance of 6.41Ω/□. In this paper, we analyzed the surface characteristics caused by the working pressure and O₂ plasma surface treatment to apply a transparent electrode that was prepared to the laminated structure with other materials. The working pressure was changed in the WO₃ film to 10mTorr, 7mTorr, and 5mTorr, it showed a lower than roughness of conventional ITO. In addition, by 55.5774 J/m² at 5mTorr, it shows the hydrophobic property with lower process pressure. O₂ plasma surface treatment was changed at the condisions of the RF power to 150W, 100W, and 50W and the process time to 240s, 180s, 120s, and 60s. The surface roughness are the maximum roughness(Rmax) 6.437nm and the average roughness(Rq) 0.827nm at RF power 150W, and the maximum roughness (Rmax) 6.880nm and the average roughness (Rq) 0.839nm at process time 240sec. It showed a lower value than the surface treatment. also about working pressure and process time is increased, it showed the hydrophobic.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.235-241
• /
• 1996

수직자기 기록매체를 위해 스퍼터링법으로 Co/Pd 및 Co/Pt 다층막을 형성하였으며 Pd 및 Pt 바닥층의 증착 압력이 다층막의 자화거동 및 보자력에 미치는 영향에 대해 연구하였다. Co/Pd 다층막의 경우 보자력이 바닥층의 증착 압력에 매우 민감하여 바닥층 증착압력만을 조절함으로써 보자력을 크게 증가시킬 수 있었으나 Co/Pt 경우 바닥층의 증착압력 조절에 의한 보자력 증대효과는 미미하였다. 바닥층의 종류 및 증착압력에 따른 다층막의 보자력 변화를 바닥층의 표면 거칠기 및 다층막 증착착시의 계면상태 변화의 측면에서 설명할 수 있었으며 이는 바닥층의 증착압력의 증가에 따른 다층막의 수직이방성 에너지 감소 및 자화반전 기구의 변화와도 연관시킬 수 있었다. 다층막의 Kerr 회전각은 바닥층의 종류 및 증착압력에는 거의 의존하지 않는 것으로 나타났다.

• 한국광학회지
• /
• 제15권6호
• /
• pp.531-538
• /
• 2004

균일한 표면에서 일어나는 가파른 계단형식의 흡착에 대한 연구는 이차원 현상에 대한 이해를 한층 높일 수 있다. 이를 위해 편광변조 타원해석법을 이용한 흡착측정장치를 제작하였다. 타원해석법 신호가 흡착막 형성의 과정을 원자층 이하 (∼0.3 $\AA$)로 매우 예민하게 측정할 수 있음을 확인할 수 있었다. HOPG (highly oriented pyrolytic graphite) 표면에서의 아르곤의 흡착 다층막을 측정한 결과, 34.04 K에서는 수천여개의 흡착층이 형성되어 완전 젖음이 일어남을 관찰할 수 있었다. 또한 67.05 K에서는 선명한 계단 형식으로 일어나는 9개의 흡착과 탈착을 확인할 수 있었다. 이에서 얻은 등온흡착곡선들은 많은 열역학적 상태에 관한 정보, 표면과 기체의 결합에너지에 대한 정보, 흡착막의 구조전이에 대한 정보 등을 줄 수 있을 것이다.