• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.115-121
• /
• 2023

The leopard plant has the characteristic of being used for ornamental purposes when there are yellow spots on the leaves, and is widely used as a bed plant for viewing flowers. To set several indicators to predict the growth of crops with ornamental value, and to quantitatively express the relationship between the indicators are necessary. In this study, we determine a model that estimates the leaf area and the number of flower of Farfugium japonicum Kitam. using leaf length and width, and conducting a regression analysis on some regression models. As an indicator for estimating the leaf area and the number of flower, the leaf length and width of F. japonicum were measured and applied to 8 regression models. As a result of regression analysis of 8 models that estimated leaf area and the number of flower, R² values of the linear models were all higher than 0.84 and 0.80. As a result of validation, using the most reliable model among the models for estimating the leaf area and the number of flowering, R² was 0.90 and 0.82, respectively. Using a model that estimates various indicators that can be used for quality evaluation from easy-to-measure morphological factors, the evaluation of ornamental plants will be facilitated.

• Nutrition Research and Practice
• /
• v.16 no.sup1
• /
• pp.113-125
• /
• 2022

In the current years, it has now become necessary to establish standards for micronutrient intake based on scientific evidence. This review discusses issues related to the development of the 2020 Dietary Reference Intakes for Koreans (KDRI) for magnesium (Mg), zinc (Zn), and copper (Cu), and future research directions. Following issues were encountered when establishing the KDRI for these minerals. First, characteristics of Korean subjects need to be applied to estimate nutrient requirements. When calculating the estimated average requirement (EAR), the KDRI used the results of balance studies for Mg absorption and factorial analysis for Zn, which is defined as the minimum amount to offset endogenous losses for Zn and Mg. For Cu, a combination of indicators, such as depletion/repletion studies, were applied, wherein all reference values were based on data obtained from other countries. Second, there was a limitation in that it was difficult to determine whether reference values of Mg, Zn, and Cu intakes in the 2020 KDRI were achievable. This might be due to the lack of representative previous studies on intakes of these nutrients, and an insufficient database for Mg, Zn, and Cu contents in foods. This lack of database for mineral content in food poses a problem when evaluating the appropriateness of intake. Third, data was insufficient to assess the adequacy of Mg, Zn, and Cu intakes from supplements when calculating reference values, considering the rise in both demand and intake of mineral supplements. Mg is more likely to be consumed as a multi-nutrient supplement in combination with other minerals than as a single supplement. Moreover, Zn-Cu interactions in the body need to be considered when determining the reference intake values of Zn and Cu. It is recommended to discuss these issues present in the 2020 KDRI development for Mg, Zn, and Cu intakes in a systematic way, and to find relevant solutions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.282-282
• /
• 2021

강우시 농경지와 축산시설로부터 유출되는 비점오염물질은 하류 수계의 수질과 수생태계에 악영향을 미친다. 이에 따라 환경부에서는 비점오염원관리지역을 지정하고 다양한 비점오염 저감 대책을 시행하고 있다. 본 연구에서는 비점오염원관리지역으로 지정된 안동댐 하류 중 송야천 유역을 대상으로 강우유출수 모니터링을 수행하였으며, 모니터링 결과를 바탕으로 강우시 비점오염물질 유출 특성을 분석하였다. 모니터링 기간은 2020년 6월부터 11월까지 총 5회의 강우사상에 대하여 상·하류와 유입하천을 포함한 총 8개의 모니터링 지점을 대상으로 강우사상별 유량가중평균농도(Event Mean Concentration, EMC), 오염부하, 단위면적당 오염부하를 산정하였으며, 오염원 그룹별 비점배출부하를 산정하여 오염 기여도를 분석하였다. 강우유출수 조사결과를 이용한 EMC 농도 산정 결과 유입하천인 오산천 지점이 SS와 TOC 항목을 제외한 모든 수질항목의 EMC 농도가 가장 큰 것으로 나타났다. 단위면적당 오염부하를 산정하여 비교 분석한 결과 T-P 항목의 단위면적당 오염부하는 물한천 지점(0.69 kg/ha)과 오산천 지점(0.69 kg/ha)이 크게 나타났다. 결과와 같이 오산천 지점과 물한천 지점이 오염정도가 큰 것으로 나타났으며, 이에 따른 상류 오염원 현장 정밀조사를 수행하였다. 조사 결과 강우발생시 상류에 위치한 농경지와 축사에서 발생하는 오염원이 하천으로 유입되고 있었으며, 여러 축사에서 배출되고 있는 유입수를 채취하여 분석한 결과 T-P 농도가 평균 0.935 mg/L로 높게 나타났다. 전국오염원조사자료(국립환경과학원, 2017) 내용을 참조하여 송야천 유역의 오염원 그룹별 비점배출부하를 산정해 오염 기여도를 분석한 결과, T-P 항목의 경우 축산계와 토지계의 비점배출부하가 전체 비점배출부하의 약 63%와 37%를 차지해 비점배출부하 기여도가 큰 것으로 나타났다. 이와 같이 송야천 유역의 경우 강우시 농경지와 축산시설에서 배출되는 오염물질이 하천 수질오염에 상당한 기여를 하고 있는 것으로 보여지며, 비점오염원 발생에 대한 대책 마련이 필요할 것으로 사료된다. 본 연구 결과는 송야천 유역의 비점오염 저감 대책 수립을 위한 기초자료로 활용할 수 있을 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.11-21
• /
• 2023

This study suggests the drought resilience index as S-day as a means of preparing for the recent extreme drought, allowing for the actual operational identification of each drought countermeasure's priority as well as the vulnerability of water resource facilities to drought. Although each dam's drought measures are unique in this case, the representative examples include adjusting the water supply, linking the functioning of various facilities, and considering emergency capacity. Here, 15 multipurpose dams and water supply dams in Korea were inspected. Under the return period of 20-year drought, most of dams showed stable by adjusting the water supply overall. The measures, however, did not seem to be able to resist a multi-year drought lasting more than two years. Besides, Hoengseong and Anodong-Imha Dam only lasted a year under the 100-year drought return period with other measures. Without the deployment of drought mitigation strategies, it is expected that the Hoengseong Dam, Andong-Imha Dam, Gunwi Dam, Unmun Dam, Daecheong Dam, and Juam Dam would not be able to meet the all water demand for a year under the 20-year drought condition. The ideal capacity for each drought measure was then suggested. Additionally, by increasing or decreasing the current supply contract by 10% in order to account for demand changes resulting from socio-economic instability, the drought response capacity of all 15 dams was re-evaluated. By lowering the supply contract amount by 10%, it was possible to endure a severe drought.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.45-53
• /
• 2023

The growth of Si on 4H-SiC substrate has a wide range of applications as a very useful material in power semiconductors, bipolar junction transistors and optoelectronics. However, it is considerably difficult to grow very fine crystalline Si on 4H-SiC owing to the lattice mismatch of approximately 20 % between Si and 4H-SiC. In this paper, we report the growth of a Si epilayer by an Al-related nanostructure cluster grown on a 4H-SiC substrate using a mixed-source hydride vapor phase epitaxy (HVPE) method. In order to grow hexagonal Si on the 4H-SIC substrate, we observed the process in which an Al-related nanostructure cluster was first formed and an epitaxial layer was formed by absorbing Si atoms. From the FE-SEM and Raman spectrum results of the Al-related nanostructure cluster and the hexagonal Si epitaxial layer, it was considered that the hexagonal Si epitaxial layer had different characteristics from the general cubic Si structure.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.1
• /
• pp.31-41
• /
• 2006

The purpose of this study was to examine the use of different sorts of Korean traditional liquor among male and female adults in Seoul and Gyeonggi province, their awareness of them and their preference in an effort to discuss what problems Korean traditional liquors were faced with and how they could gain popularity among people in general. First, It is investigated of drinking frequency by gender, 51.3 percent of the male adults drunk once or twice a week, and 33.2 percent of the female adults drunk once or twice a month. Thus, the men drunk more often than the women. By age, the adults who were in their 20s and 30s were far different from those who were in their 50s above in drinking frequency. Second, regarding what kind of liquor they enjoyed, the men enjoyed Soju the most, followed by beer and traditional liquors. The women enjoyed beer the most, followed by Soju and wine. The favorite liquor of the men was Soju, followed by beer and traditional liquor, and the women most liked for beer, followed by wine and Soju. The female adults preferred low-proof liquor more than the male adults. Third, concerning their awareness of traditional liquor, Andong-soju was most widely viewed as traditional liquor, which were followed by Munbaeju, Gyeongju-gyodongbeopju, Gyeongju-beopju, Gukhwaju, Ssal- makgeolri, and Geumsan-insamju. Overall, they were rarely aware what traditional liquor was. Fourth, as to purchase experience, the men and the older people had more experience to buy traditional drinks than the women and the younger ones. Fifth, as for anju (dishes for traditional drinks), they believed that panfried food and Kimchi should be served with coarse liquor. Panfried and streamed dishes were considered to be good complements to Takju (rice wine) and Cheongju (clear strained rice wine), and pot stew and soup were looked upon as good complements to distilled liquor. The above-mentioned findings illustrated that in order to step up the development of the traditional liquor industry, perpetual research efforts should be put into adding new tastes to unique traditional liquor drinks. And it's required to commercialize those drinks, and multiple P.R. and marketing strategies should be prepared to promote their sales.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.202-202
• /
• 2022

Recently days, soybean production in paddy field is increasing, from 4,422 ha in 2016 to 10,658 ha in 2021 in Korea. It is easy for Phytophthora stem and root rot (PSR) occurring in paddy field condition, when it is poorly drained soils with a high clay content, and temporary flooding and ponding. Therefore PSR resistant soybean cultivar is required. The objective of this study is to identify QTL region and candidate genes relating to PSR resistance of the race in main soybean cultivation area in Korea. 210 soybean materials including cultivars and germplasm were used for inoculation and genome-wide association study (GWAS). Inoculation was conducted using stem-scar method with 2 replications in 2-year for the race 3053 from Kimje and 3617 from Andong. 210 materials were genotyped with Soya SNP 180K chip, and structure analysis and association mapping were conducted with QTLMAX V2. The results of inoculation showed that survival ratio ranged from 0% to 96.7% and mean 9.7% for 3053 and ranged from 0% to 100% and mean 7.6% for 3617. Structure analysis showed linkage disequillibrium (LD) was decayed below r²=0.5 at 335kb of SNP distance. Significant SNPs (LOD>7.0) were identified in Chr 1, 2, 3, 4, 5, 11, 14, 15 for 3053 and Chr 1, 2, 3, 7, 10, 14 for 3617. Especially, LD blocks (AX-90455181;15,056,628bp~AX-90475572;15,298,872bp) in Chr 2 for 3053 and 3067 were duplicated. 29 genes were identified on these genetic regions including Glyma.02gl47000 relating to ribosome recycling factor and defense response to fungus in Soybase.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.7-22
• /
• 2023

In January 2022, a new legislation was enforced to enhance the safety of underground construction. Consequently, a comprehensive assessment of underground safety is now an integral part of the planning process, including an evaluation of its impact. Ensuring the stability of temporary retaining walls during underground excavation has become paramount, prompting a heightened focus on the assessment of underground safety. This study delves into the analysis of the Multi-axis Flat Continuous Soil Cement Wall retaining wall (MFS) construction method. This method facilitates the expansion of wall thickness in the ground and provides flexibility in selecting and spacing H-piles. Through laboratory model tests, we scrutinized the load-displacement behavior of the wall, varying the H-pile installation intervals using the MFS method. Additionally, a 3-dimensional numerical analysis was conducted to explore the influence of H-pile installation intervals and sizes on the load for different thicknesses of the MFS retaining wall. The displacement analysis yielded the calculation of the height of the arching effect acting on the wall. To further our understanding, a design method was introduced, quantitatively analyzing the results of axial force and shear force acting on the wall. This involved applying the maximum arching height, calculated by the MFS method, to the existing member force review method. The axial force and shear force, contingent on the H-pile installation interval and size applied to the MFS retaining wall, demonstrated a reduction effect ranging from 24.6% to 62.9%.

• Communications of Mathematical Education
• /
• v.37 no.4
• /
• pp.569-590
• /
• 2023

The purpose of this case study is to compare and analyze the covariational reasoning levels of two middle school students revealed in the process of solving and generalizing algebra word problems. A class was conducted with two middle school students who had not learned quadratic equations in school mathematics. During the retrospective analysis after the class was over, a noticeable difference between the two students was revealed in solving algebra word problems, including situations where speed changes. Accordingly, this study compared and analyzed the level of covariational reasoning revealed in the process of solving or generalizing algebra word problems including situations where speed is constant or changing, based on the theoretical framework proposed by Thompson & Carlson(2017). As a result, this study confirmed that students' covariational reasoning levels may be different even if the problem-solving methods and results of algebra word problems are similar, and the similarity of problem-solving revealed in the process of solving and generalizing algebra word problems was analyzed from a covariation perspective. This study suggests that in the teaching and learning algebra word problems, rather than focusing on finding solutions by quickly converting problem situations into equations, activities of finding changing quantities and representing the relationships between them in various ways.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.19-23
• /
• 2023

The Second-generation high-temperature superconducting (HTS) Rare-Earth Barium Copper Oxide (REBCO) wire is a composite laminate having a multi-layer structure (8 or more layers). HTS wires will undergo multiple loads including the bending-tension loads during winding, high current density, and high magnetic fields. In particular, the wires are subjected to bending stress and magnetic field stress because HTS wires are wound around a circular bobbin when making a high-field magnetic. Each of the different laminated wires inevitably exhibits damage and fracture behavior of wire due to stress deformation, mismatches in thermal, physical, electrical, and magnetic properties. Therefore, when manufacturing high-field magnets and other applications, it is necessary to calculate the stress-strain experienced by high-temperature superconducting wire to present stable operating conditions in the product's use environment. In this study, the finite element model (FEM) was used to simulate the strain-stress characteristics of the HTS wire under high current density and magnetic field, and bending loads. In addition, the result of obtaining the neutral axis of the wire and the simulation result was compared with the theoretical calculation value and reviewed. As a result of the simulation using COMSOL Multiphysics, when a current of 100 A was applied to the wire, the current value showed the difference of 10^-9. The stress received by the wire was 501.9 MPa, which showed a theoretically calculated value of 500 MPa and difference of 0.38% between simulation and theoretical method. In addition, the displacement resulted is 30.0012 ㎛, which is very similar to the theoretically calculated value of 30 ㎛. Later, the amount of bending stress by the circular mandrel was received for each layer and the difference with the theoretically obtained the neutral axis result was compared and reviewed. This result will be used as basic data for manufacturing high-field magnets because it can be expanded and analyzed even in the case of wire with magnetic flux pinning.