Acknowledgement
This work was supported by the Ministry of Industry, Trade, and Energy (MITE) and by the Korea Evaluation Institute of Industrial Technology(KEIT) (No. 20020421)
References
- https://nationalmaglab.org/magnet-development/appliedsuperconductivity-center/plots, "Comparisons of superconductor critical current densities, Engineering Critical Current Density vs. Applied Field for Superconductors Available in Long Lengths," The National High Magnetic Field Laboratory, Last modified on 21 June 2023.
- S. Hahn, K. Kim, K. Kim, X. Hu, T. Painter, I. Dixon, S. Kim, K. R. Bhattarai, S. Noguchi, J. Jaroszynski, and D. Larbalestier, "45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnet," Nature, vol. 570, no. 7762, pp. 496-499, 2019. https://doi.org/10.1038/s41586-019-1293-1
- S. Yoon, J. Kim, K. Cheon, H. Lee, S. Hahn, and S.-H. Moon, "26 T 35 mm all-GdBa2Cu3O7-x multi-width no-insulation superconducting magnet," Supercond. Sci. Technol., vol. 29, pp. 04LT04, 2016.
- K. Kim, K. R. Bhattarail, J. Y. Jang, Y. J. Hwang, K. Kim, S. Yoon, S. Lee, and S. Hahn, "Design and performance estimation of a 35 T 40 mm no-insulation all-REBCO user magnet," Supercond. Sci. Technol., vol. 30, pp. 065008, 2017.
- J. Y. Jang, Y. J. Hwang, J. Kim, S. Song, G. Kim, K. Choi, S. Hahn, M. Ahn, and S. Lee, "Experimental Study of a Room-Temperature Shimming Technology Employing Genetic Algorithm for NMR/MRI Superconducting Magnets," IEEE Trans. Appl. Supercond., vol. 33, no. 5, pp. 4300705, 2023.
- K. L. Kim, S. Yoon, K. Cheon, J. Kim, H. Lee, S. Lee, D. L. Kim, and S. Hahn, "400-MHz/60-mm All-REBCO Nuclear Magnetic Resonance Magnet: Magnet Design," IEEE. Trans. Appl. Supercond., vol. 26, pp. 4302604, 2016.
- Jae-Hun Lee, et al., "RCE-DR, a novel process for coated conductor fabrication with high performance," Supercond. Sci. Technol., vol. 27, pp. 044018, 2014.
- M. A. E. Diaza, H. -S. Shin, H. -S. Jung, and J. Lee, "Performance evaluation of differently structured RCE-DR GdBCO coated conductor tapes under uniaxial tension at 77 K," Progress in Superconductivity and Cryogenics, vol. 24, no.1, pp. 13-17, 2022.
- M. B. de Leon, A. R. Nisay, M. A. Diaz, and H. -S. Shin, "Widthwise Bending-Induced Response of Critical Current in REBCO Tapes," IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-5, 2023, Art no. 8401105, doi: 10.1109/TASC.2023.3263332.
- M. Wang, Z. Li, Y. Yan, M. Zhang, J. Sheng, Z. Hong, Z. Jin, Y. Iwasa, and T. Qu, "A novel REBCO conductor design to reduce screening-current field in REBCO magnets," Phys. Scr., vol. 94, pp. 105803, 2019.
- U. Floegel-Delor, R. Rothfeld, T. Riedel, P. Schirrmeister, R. Koenig, V. Kantarbar, and F. N. Werfel, "Progress in Copper Plating Reel-to-Reel Technology in HTS-Coated Conductor Fabrication," IEEE Transactions on Applied Superconductivity, vol. 27, pp. 6601705, 2017.
- N. C. Allen, L. Chiesa, and M. Takayasu, "Structural modeling of HTS tapes and cables," Cryogenics, vol. 80, no. 3, pp. 405-418, 2016. https://doi.org/10.1016/j.cryogenics.2016.02.002
- X. Peng and H. Yong, "Structural analysis of REBCO coated conductors and quasi-isotropic strands under bending using continuum shell element," Cryogenics, vol. 133, pp. 103701, 2023.
- D. P. Boso, A. Musso, E. Pilastro, and P. L. Ribani, "Numerical Investigation on the Thermo-Mechanical Behavior of HTS Tapes and Experimental Testing on Their Critical Current," IEEE Transactions on Applied Superconductivity, vol. 30, no. 4, 2020.
- Y. Pan and P. Gao, "Analysis of mechanical behavior and electromechanical properties of REBCO-coated conductor tapes under combined bending-tension loads using numerical methods," Supercond. Sci. Technol., vol. 36, pp. 045006, 2023.
- Y. Shi, A. Dai, T. Ma, and W. Liu, "Effect of Bending Strain on the Current‑Carrying Performance of Copper‑Laminated REBCO Tape," Journal of Superconductivity and Novel Magnetism, vol. 35, pp. 647-655, 2022. https://doi.org/10.1007/s10948-021-06103-6
- S. Moon, "The status of development and commercial of second generation HTS long wire at SuNAM Co. Ltd.", Ceramist, vol. 15, no. 6, pp.16-19, 2012.
- H. -S. Shin, A. Nisay, M. Dedicatoria, and K. Sim, "Establishment of an easy Ic measurement method of HTS superconducting tapes using clipped voltage taps," Progress in Superconductivity and Cryogenics (PSAC), vol. 16, no. 2, pp. 29-32, 2014. https://doi.org/10.9714/psac.2014.16.2.029
- M. B. de Leon, M. J. Dedicatoria, and H. S. Shin, "Determination of winding diameter based on bending strain analysis for REBCO coated conductor tapes," Journal of the Korea Institute of Applied Superconductivity and Cryogenics, vol. 14, no. 2, pp. 8-11, 2012 https://doi.org/10.9714/psac.2012.14.2.008