• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.24-31
• /
• 2016

BACKGROUND: Heavy metal adsorption not only depends on rapid cooling slag(RCS) characteristics but also on the nature of the metals involved and on their competitive behavior for RCS adsorption sites. The goal of this study was to investigate the competitive absorption characteristics of Cu, Cd and Zn in single- and multi-metal forms by RCS.METHODS AND RESULTS: Both single- and multi-metal adsorption experiments were conducted to determine the adsorption characteristics of RCS for the heavy metals. Adsorption behaviors of the heavy metals by RCS were evaluated using both the Freundlich and Langmuir adsorption isotherm equations. The maximum adsorption capacities of metals by RCS were in the order of Cu(16.6 mg/g) > Cd(8.1 mg/g) > Zn(6.2 mg/g) in the single-metal adsorption isotherm and Cu(14.5 mg/g) >> Zn(1.3 mg/g) > Cd(0.6 mg/g) in the multi-metal adsorption isotherm. Based on data obtained from Freundlich and Langmuir adsorption models and three-dimensional simulation, multi-metal adsorption behaviors differed from single- metal adsorption due to competition. Cadmium and Zn were easily exchanged and substituted by Cu during multi-metal adsorption.CONCLUSION: Results from adsorption experiments indicate that competitive adsorption among metals increases the mobility of these metals.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.65-72
• /
• 2007

What is the meaning of home to older people? How much is home significant for older people? How do they express self-identity through decorating their own homes? These are the new subjects that scholars in the West are involved in lately in terms of micro-perspective (George, 1998; Kellett, Gilroy & Jason, 2005; Gilroy & Kellett, 2006). It is evident that home has more significant meaning to older people than other age groups, since the older are more likely to spend greater time within the home through lower income, lessening mobility or loss of companions (Gilroy, 2005). Also the older tend to cling to their homes and attach to possessions than the younger. Older people's possessions are the things that memories of their lives were absorbed. Therefore, possession display can role as a mean of showing their past lives and memories. Gilroy and her colleagues (2005, 2006) found that there was a certain pattern of possession display in English older people's households, and that older people would like to express self-identity through decorating their own homes with their precious possessions. Then, isn't it interesting to find out if there is any pattern of possession display or decoration items in Korean older people's households as well? Thus, the aim of this study is to describe pattern of possession display as a mean of expressing self-identity in Korean older people's households. Interview with older people was used to find out the way and reason of display possessions. Observation method including taking photos and hand-drawings was also added in order to demonstrate detail condition of display items in the house. Possessions display and furniture arrangement in the living room and bedroom were investigated to find out a certain pattern of display and meaning. Research objects were healthy older people aged over 60, who are living independently from their adult children, and who can manage housekeeping by themselves. 32 households were investigated in the area of Seoul, Kyunggi, Chungchungnam, and Kangwon provinces. The findings demonstrate that most precious possession for Korean older people is photo of themselves; especially one taken in their younger age. The reason of it is because the photo reminds them of their heydays when they were vital. Photo of the most beloved one is displayed more frequently in the bedroom than in the living room indicating consistence with English case. As symmetrical display pattern was dominant in case of English older people's households, no dominant display pattern is found in Korean case. Korean older people also cling to their homes and possessions and want to keep their dwelling space as large as what they use now. It is notable that even after they become older and frail, they want sufficient space to display possessions as a mean of self-identity expression. Attachment to possessions and decoration can give older people significant meaning of identity, and it is the reason why architects or interior designers have to meet older people's needs. It needs consideration that residents are allowed to bring their old furniture and precious possessions when they move in elderly housing unit in order to minimize environmental shock, as well as feeling at home. This subject could suggest a clue to designers or architects who have to meet residents' needs in space design of elderly housing or facilities in the future. Psychological well-being of older people can be met by making them feel at home wherever they live. They need space where they can express their own identity and personality even in case when they have to live in a limited small space like elderly housing unit or nursing home.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.734-744
• /
• 2011

A soil stabilization method is an effective and practical remediation alternative for arsenic (As) and heavy metal contaminated farmland soils nearby abandoned metal mine in Korea. This method is a technique whereby amendments are incorporated and mixed with a contaminated soil. Toxic metal bind to the amendments, which reduce their mobility in soil, so the successful stabilization of multi-element contaminated soil depends on the combination of critical elements in the soil and the type of amendments. The objective of this study is to investigate the treatment effects and applicability of limestone (LS) and steel refining slag (SRS) as the amendment for farmland soil contaminated with As and heavy metals, and a lab-column test was conducted for achieving this purpose. The result showed that soil treated with LS and SRS maintained pH buffer capacity and, as a result, the heavy metal leaching concentration was quite low below the water quality standard compared to untreated soil which leachate exceeding the water quality standard was observed, however, the arsenic concentration rather increased with increasing mixture ratio of SRS. This was believed to be related to phosphorus (P) contained in SRS, and dominancy in the competitive adsorption relation between As and P binding strongly to iron might be different according to soil characteristic. We suggested that LS is a effective amendment for reducing heavy metals in soil, and SRS should be used after investigating its applicability based on the adsorption selectivity of arsenic and phosphorus in selected soil.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.91-107
• /
• 2023

Lean startup is a concept that combines the words "lean," meaning an efficient way of running a business, and "startup," meaning a new business. It is often cited as a strategy for minimizing failure in early-stage businesses, especially in software-based startups. By scrutinizing the case of a startup L, this study suggests that lean startup methodology(LSM) can be useful for hardware and manufacturing companies and identifies ways for early startups to successfully implement LSM. To this end, the study explained the core of LSM including the concepts of hypothesis-driven approach, BML feedback loop, minimum viable product(MVP), and pivot. Five criteria to evaluate the successful implementation of LSM were derived from the core concepts and applied to evaluate the case of startup L . The early startup L pivoted its main business model from defecation alert system for patients with limited mobility to one for infants or toddlers, and finally to a smart bottle for infants. In developing the former two products, analyzed from LSM's perspective, company L neither established a specific customer value proposition for its startup idea and nor verified it through MVP experiment, thus failed to create a BML feedback loop. However, through two rounds of pivots, startup L discovered new target customers and customer needs, and was able to establish a successful business model by repeatedly experimenting with MVPs with minimal effort and time. In other words, Company L's case shows that it is essential to go through the customer-market validation stage at the beginning of the business, and that it should be done through an MVP method that does not waste the startup's time and resources. It also shows that it is necessary to abandon and pivot a product or service that customers do not want, even if it is technically superior and functionally complete. Lastly, the study proves that the lean startup methodology is not limited to the software industry, but can also be applied to technology-based hardware industry. The findings of this study can be used as guidelines and methodologies for early-stage companies to minimize failures and to accelerate the process of establishing a business model, scaling up, and going global.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2005

This study analyzed total concentrations and existing forms of heavy metals in soils of Ulsan using a sequential extraction method. Soil samples were collected from 6 categorized areas including green, residential, heavy traffic, petrochemical industrial complex(IC), mechanical and shipbuilding IC, and non-ferrous metal IC areas. which represent different emission characteristics. The highest total concentrations of heavy metals by a sequential extraction analysis were observed in the soils collected from the non-ferrous metal IC area, followed by the mechanical and shipbuilding IC and heavy traffic areas. Dominant(> 50%) existing forms of Cd, Cr and Ni were residual forms followed by Fe and Mn oxides in almost areas. Residual fractions in the non-ferrous metal IC areas were relatively lower than those in other areas. However, the fractions of organic and sulphides in the IC areas were higher. The dominant farms of Cu were much different with the investigated areas. In most areas, the dominant forms of Pb and Zn were Fe and Mn oxides, followed by residual fraction for Pb. The exchangeable and carbonate fractions represent mobility of metallic elements in soils. They are also significantly affected by the environmental renditions, such as pHs of soil and rainfall. In this study the exchangeable and carbonate fractions were lower than other fractions. Because the total concentrations of heavy metals in the soils of the non-ferrous metal IC area were extremely high, however, the mobile fractions of heavy metals in the IC area would be significant. Thus a large amount of heavy metals can be released into plants, water bodies, and soils. Therefore, urgent measures, such as source control for soil remediation of heavy metals, in the non-ferrous metal IC areas are essentially required. Analysis results obtained from the sequential extraction and the aqua regia extraction showed a high correlation, whose determination coefficients(R2) of heavy metals except Cd approximately ranged from 0.7 to 0.9.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.139-159
• /
• 1996

This study comparatively examines a causal model of employee attatchment which focuses on employee's organizational commitment and intent to stay with an organization. This study is based on two separate studies of employee attachment among teachers : the U.S. case of the Chicago Public Schools (CPS) and the South Korean case of the Seoul Educational District (SED). The main purpose of this study is to replicate in Korea the CPS study. A revised model based on the unique characteristics of Korean teachers is also developed and estimated. The Price Mueller model of employee attachment provides the basic theoretical framework for this study. It includes five general classes of variables : 1) employee responses to work variables : job satisfaction, commitment, and intent to stay; 2) psychological stress variables: role ambiguity, role conflict, work overload, and quality of students; 3) social structural variables: autonomy, routinization, distributive justice, and legitimacy; 4) economic structural variables: pay, job security, promotional opportunities, and job opportunities; and 5) work orientation variables : career commitment, normative commitment, work motivation, affectivity, work values, and met expectations. The data was collected through questionnaire survey and a sample of 649 secondary school teachers in Seoul, South Korea, was included in the final analysis. Covariance structure analysis (LISREL) was used to estimate the causal model. The results indicate that the endogenous variables of job satisfaction and commitment play a considerably less important role than in the U.S. model in mediating the effects of the exogenous variables on intent to stay, and the model fails to explain the majority of the variance in intent to stay. In addition, the new variables added to the revised Korean model do not bave significant effects on intent to stay. The structural characteristics of the employment relationship and labor markets associated with Korean teachers forced mobility and closed external markets - are largely accountable for the major differences between the Korean and the U.S. cases. The study suggests that conceptual and empirical work on what produces employee attachment under these structural constraints needs to receive more attention in future studies.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.3
• /
• pp.365-373
• /
• 1999

Background: Despite widespread use of tracheostomy in intensive care unit, it is still controversial to define the best timing from endotracheal intubation to tracheostomy under prolonged mechanical ventilation. Early tracheostomy has an advantage of easy airway maintenance and enhanced patient mobility whereas a disadvantage in view of nosocomial infection and tracheal stenosis. However, there is a controversy about the proper timing of tracheostomy. Methods: We conducted a retrospective study of the 35 medical and 15 surgical ICU patients who had admitted to Ewha Womans University Mokdong Hospital from January 1996 to August 1998 with the observation of APACHE III score, occurrence of nosocomial infections, and clinical outcomes during 28 days from tracheostomy in terms of early (n=25) vs. late (n=25) tracheostomy. We defined the reference day of early and late tracheostomy as 7th day from intubation. Results: The number of patients were 25 each in early and late tracheostomy group. The mean age were $48{\pm}18$ years in early tracheostomy group and $63{\pm}17$ years in late tracheostomy group, showing younger in early tracheostomy group. The median duration of intubation prior to tracheostomy was 3 days and 13 days in early and late tracheostomy groups. Organs that caused primary problem were nervous system in 27 cases(54%), pulmonary 14(28%), cardiovascular 4(8%), gastrointestinal 4(8%) and genitourinary 1(2%) in the decreasing order. Prolonged ventilation was the most common reason for the purpose of tracheostomy in both groups. APACHE m scores at each time of intubation and tracheostomy were slightly higher in late tracheostomy group but not significant statistically. Day to day APACHE III scores were not different between two groups with observation upto 7th day after tracheostomy, Occurrence of nosocomial infections, weaning from mechanical ventilation, and mortality showed no significant difference between two groups with observation of 28 days from tracheostomy. The mortality was increased as the APACHE m score upto 7 days after tracheostomy increased, but there were no increment for the mortality in terms of the time of tracheostomy and the days of ventilator use before tracheostomy, Conclusion: The early tracheostomy seems to have no benefit with respect to severity of illness, nosocomial infection, duration of ventilatory support, and mortality. It suggests that the time of tracheostomy is better to be decided on clinical judgement in each case. And in near future, prospective, randomized case-control study is required to confirm these results.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.215-224
• /
• 2017

Arsenic (As) is known to be the most toxic element and frequently detected in groundwater environment. Inorganic As exists as arsenite [As(III)] and arsenate [As(V)] in reduced and oxidized environments, respectively. It has been reported that the toxicity of arsenite is much higher than that of arsenate and furthermore arsenite shows relatively higher mobility in aqueous environments. For this reason, there have been numerous researches on the process for oxidation of arsenite to arsenate to reduce the toxicity of arsenic. In particular, photooxidation has been considered to be simple, economical, and efficient to attain such goal. This study was conducted to evaluate the applicability of naturally-occurring goethite as a photocatalyst to substitute for $TiO_2$ which has been mostly used in the photooxidation processes so far. In addition, the effects of several factors on the overall performance of arsenite photocatalytic oxidation process were evaluated. The results show that the efficiency of the process was affected by total concentration of dissolved cations rather than by the kind of those cations and also the relatively higher pH conditions seemed to be more favorable to the process. In the case of coexistence of arsenite and arsenate, the removal tendency by adsorption onto goethite appeared to be different between arsenite and arsenate due to their different affinities with goethite, but any effect on the photocatalytic oxidation of arsenite was not observed. In terms of effect of humic acid on the process, it is likely that the higher concentration of humic acid reduced the overall performance of the arsenite photocatalytic oxidation as a result of competing interaction of activated oxygen species, such as hydroxyl and superoxide radicals, with arsenite and humic acid. In addition, it is revealed that the injection of oxygen gas improved the process because oxygen contributes to arsenite oxidation as an electron acceptor. Based on the results of the study, consequently, the photocatalytic oxidation of aqueous arsenite using goethite seems to be greatly feasible with the optimization of process.

• Composites Research
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2021

Due to enormous market growing of electric vehicles without combustion engine, reducing unwanted BSR (buzz, squeak, and rattle) noise is highly demanded for vehicle quality and performance. Particularly, innerbelt weatherstrips which not only block wind noise, rain, and dust from outside, but also reduce noise and vibration of door glass and vehicle are required to exhibit high damping properties for improved BSR performance of the vehicle. Thermoplastic elastomers (TPEs), which can be recycled and have lighter weight than thermoset elastomers, are receiving much attention for weatherstrip material, but TPEs exhibit low material damping and compression set causing frictional noise and vibration between the door glass and the weatherstrip. In this study, high damping EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV) were investigated by varying EPDM/PP ratio and ENB (ethylidene norbornene) fraction in EPDM. Viscoelastic properties of TPV materials were characterized by assuming that the material damping is directly related to the viscoelasticity. The optimum material damping factor (tanδ peak 0.611) was achieved with low PP ratio (14 wt%) and high ENB fraction (8.9 wt%), which was increased by 140% compared to the reference (tanδ 0.254). The improved damping is believed due to high fraction of flexible EPDM chains and higher interfacial slippage area of EPDM particles generated by increasing ENB fraction in EPDM. The stick-slip test was conducted to characterize frictional noise and vibration of the TPV weatherstrip. With improved TPV material damping, the acceleration peak of frictional vibration decreased by about 57.9%. This finding can not only improve BSR performance of electric vehicles by designing material damping of weatherstrips but also contribute to various structural applications such as urban air mobility or aircrafts, which require lightweight and high damping properties.