본 연구에서는 자망에 대한 대게 수컷의 망목선택성을 구명하기 위하여 5종류의 망목 (m = 180, 210, 240, 270, 300㎜)으로 구성된 자망을 제작하고, 2002년 1월부터 2003년 3월까지 경북 죽변항 주변 수역에서 총 12회의 시험조업을 행하였다. 망목선택성 곡선의 계산에 사용될 데이터 확보를 위하여 어획된 대게 수컷의 전수에 대한 최대갑장 RL을 디지털 켈리퍼스를 사용하여 0.1㎜ 단위로 측정하였다. 망목선택성 곡선의 추정에는 Kitahara의 방법을 사용하였다. 대수 망목선택성 곡선의 함수로써 좌우대칭형인 2차식과 좌우비대칭형인 3 차식을 적용하였으며, 최소지승법을 사용하여 각 모델의 파라미터를 추정하였다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 1. 자망에 대한 대게 수컷의 망목선택성 곡선은 Model 의 적합도 비교를 통하여 좌우비대칭형인 3 차식이 선택되었다. 2. 망목선택성의 결과는 망목이 커질수록 소형 수게의 혼획이 감소한다는 것을 나타낸다. 3. 망목선택성 곡선은 이하의 수식으로 표현된다. S(R) = S(RL/m) = exp ((44.06 R³- 84.16 R²+ 52.30 R-5.46) - 5.17) 4. 선택률 1을 나타내는 최적 RL/m의 값은 0.549이며, 선택률 0.5, 0.25, 0.2를 나타내는 RL/m은 각각 0.356, 0.296, 0.281로 추정되었다.
Rahman, Md. Rayhanur;Hossain, Mohammed Kamal;Hossain, Md. Akhter
Journal of Forest and Environmental Science
/
제35권3호
/
pp.159-172
/
2019
Madhupur National Park (MNP) is one of the last remaining patches of old-growth natural Sal forest left in Bangladesh where the forest is tropical moist deciduous type. A study was revealed to assess the tree species diversity and composition in this area. For determining tree species the study was conducted through extensive random quadrat survey methods with $20m{\times}20m$ sized plots. Results of the study indicated that there were 139 tree species belonging to 100 genera and 40 families. The quadrat survey assessed the basal area, stem density, diversity indices and importance value index of the tree species having ${\geq}5cm$ D.B.H (Diameter at Brest Height). The basal area and stem density of the tree species were $20.689{\pm}1.08m^2/ha$ and $1412.93{\pm}64.27stem\;ha^{-1}$ while, diversity indices, i.e. Shannon-Wiener's diversity, Simpson's evenness, Margalef's species richness and Pielou's dominance indices indicated poor diversity in comparison to that of other PAs (Protected Areas) in South-Eastern region of Bangladesh. The structural composition based on height and D.B.H through reverse-J shaped curve indicated higher regeneration and recruitment but removal of trees of large growth classes. Sal (Shorea robusta) was the most dominant tree species that accounts 75% of the total tree individuals in the natural forest patches. However, some associates of Sal, i.e. Bhutum (Hymenodictyon orixensis), Gadila (Careya arborea), and Kusum (Schleichera oleosa) etc. were seemed to be rare in MNP.
A series of field tests to estimate the size selectivity of monofilament and multifilament gill net for marbled sole, Pleuronectes yokohamae, were carried out 12 times with five different mesh sizes (86.6, 101.0, 121.2, 137.7 and 151.5mm) in the western sea of Korea from 2007 to 2009. The master selection curve was estimated by the extended Kitahara's method. The total number of catch species was 23 and that of catch was 1,688 in the field tests. Marbled sole of total catch was 1,150 with 68.1 percent. In the monofilament trammel net, the optimum value of total length (TL) per mesh size (m) for 1.0 of retention probability was estimated 0.280 and the values of TL/m were estimated to be 0.187, 0.201, 0.210, 0.218 and 0.226 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. In the multifilament trammel net, the optimum value of TL/m for 1.0 of retention probability was estimated 0.307 and the values of TL/m were estimated to be 0.195, 0.211, 0.222, 0.232 and 0.241 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively.
Background: The high incidence of prostate cancer as the most common malignancy in males in many countries raises the question of developing reliable detection tests. The prostate specific antigen (PSA) test is the most widely used for screening for prostate cancer; however, its low specificity elevates the number of unnecessarily biopsies. Serum human kallikrein-2 (hK2) is considered as a promising marker, and especially its ratio to fPSA, for predicting the presence of malignancy to select the best choice referring to biopsy or surveillance. In this study, we investigated the role of hK2 and its combinations with other markers to discriminate prostate cancer from benign diseases in Syrian patients. Materials and Methods: In this prospective oriented cross-sectional cohort study, serum samples were collected from patients referred to many Hospitals in Damascus, Syria, between May 2011 and March 2012, and diagnosed with biopsy proven benign prostate hyperplasia (BPH) or prostate cancer (PCa). Serum was analyzed for hK2, PSA and fPSA, and the ratios of fPSA/PSA and hK2/fPSA were calculated. Results: We found that mean hK2/fPSA ratios were significantly higher (P=0.01) in prostate cancer patients than in the BPH or control groups. Also the ratio hk2/fPSA gave the largest area under the curve (AUC:0.96) which was significantly larger than for fPSA/PSA (AUC:0.41) indicative of higher specificity. Conclusions: Our results demonstrate that the ratio of hK2/fPSA might be superior to the use of fPSA/PSA alone. The hK2 could be shown to enhance the early detection of prostate cancer; especially the ratio hK2/fPSA improves specificity and hence may reduce the number of negative biopsies.
There is a growing need to introduce advanced pressure vessel steels with higher strength and toughness for the optimizatiooCn of the design and construction of longer life and larger capacity nuclear power plants. SA508 Gr.4N Ni-Cr-Mo low alloy steels have superior strength and fracture toughness, compared to SA508 Gr.3 Mn-Mo-Ni low alloy steel. Therefore, the application of SA508 Gr.4N low alloy steel could be considered to satisfy the strength and toughness required in advanced nuclear power plants. The purpose of this study is to characterize the microstructure and mechanical properties of SA508 Gr.4N low alloy steels. 1 ton ingot of SA508 Gr.4N model alloy was fabricated by vacuum induction melting followed by forging, quenching, and tempering. The predominant microstructure of the SA508 Gr.4N model alloy is tempered martensite having small packet and fine Cr-rich carbides. The yield strength at room temperature was 540MPa, and it was decreased with an increase of test temperature while DSA phenomenon occurred at around $288^{\circ}C$. Overall transition property of SA508 Gr.4N model alloy was much better than SA508 Gr.3 low alloy steel. The index temperature, $T_{41J}$, of SA508 Gr.4N model alloy was $-132^{\circ}C$ in Charpy impact tests, and reference nil-ductility transition temperature, $RT_{NDT}$ of $-105^{\circ}C$ was obtained from drop weight tests. From the fracture toughness tests performed in accordance with the ASTM standard E1921 Master curve method, the reference temperature, $T_0$ was $-147^{\circ}C$, which was improved more than $60^{\circ}C$ compared to SA508 Gr.3 low alloy steels.
Current guidance considers that uniaxially loaded specimen with a deep crack is used for the determination of the ductile-to-brittle transition temperature. However, reactor pressure vessel is under biaxial loading in real and the existence of deep crack is not probable through periodic in-service-inspection. The elastic stress intensity factor and the elastic-plastic J-integral which were used for crack-tip stress field and fracture mechanics assessment parameters. The difference of the loading condition and crack geometry can significantly influence on these parameters. Thus, a constraint effect caused by differences between standard specimens and a real structure can over/underestimate the fracture toughness, and it affects the results of the structural integrity assessment, consequentially. The present paper investigates the constraint effects by evaluating the master curve $T_0$ reference temperature of PCVN (Pre-cracked Charpy V-Notch) and small scale cruciform specimens which was designed to simulate biaxial loading condition with shallow crack through the fracture toughness tests and 3-dimensional elastic-plastic finite element analyses. Based on the finite element analysis results, the fracture toughness values of a small scale cruciform specimen were estimated, and the geometry-dependent factors of the cruciform specimen considered in the present study were determined. Finally, the transferability of the test results of these specimens was discussed.
본 연구에서는 표면 전극을 사용하는 8채널 전기자극 시스템을 개발하였고. 이 시스템을 이용하여 하반신 마비한자의 근력강화를 위한 전기자극 엑서사이즈와 FES 보행을 하였다. 본 연구에서 개발한 전기자극 시스템은 컴퓨터 프로그램, 전기자극기, 그리고 컴퓨터 프로그램과 전기자극기를 연결하는 통신부분으로 구성되어 있다. 컴퓨터 프로그램에서는 마우스를 이용하여 임의의 자극 패턴을 손쉽게 구성하고 편집학 수 있으며 이렇게 구성/편집된 자극 패턴은 동원곡선(recruitment curve)을 통하여 자극 파라미터로 변환된다. 자극 파라미터는 직렬통신을 이용하여 전기자극기에 전달된다. 전기자극기는 주제어부에 1개, 각 채널에 1개씩 총 9개의 마이크로프로세서로 구성되어 있다. 주제어부의 마이크로프로세서가 컴퓨터 프로그램과 통신을 하고 각 채널의 마이크로프로세서를 제어한다. 본 연구에서 개발한 기능적 전기자극 시스템으로 하반신 마비환자에게 100주 동안 전기자극 엑서사이즈를 실시한 결과 근력, 다리둘레, 그리고 피로저항성의 증가를 볼 수 있었다. 전기자극 엑서사이즈로 무릎신근(knee extensor muscle)이 체중을 지지한 수 있을 정도로 증가한 후에 FES 보행을 시작하였고, 현재 2분 동안 50m 이상 보행할 수 있다.
Materials used for a reactor pressure vessel(RPV) are required high strength and toughness, which determine the safety margin and life of a reactor. Ni-Mo-Cr low alloy steel shows better mechanical properties than existing RPV steels due to higher Ni and Cr contents compared to the existing RPV steels. The present study focuses on effects of Ni, Cr contents on the cleavage fracture toughness of Ni-Mo-Cr low alloy steels in the transition temperature region. The fracture toughness was characterized by a 3-point bend test of precracked Charpy V-notch(PCVN) specimens based on ASTM E1921-08. The test results indicated that the fracture toughness was considerably improved with an increase of Ni and Cr contents. Especially, control of Cr content was more effective in improving fracture toughness than manipulating Ni content, though Charpy impact toughness was changed more extensively by adjusting Ni content. These differences between changes in the fracture toughness and that in the impact toughness were derived from microstructural features, such as martensite lath size and carbide precipitation behavior.
강우-유출과정은 시간적, 공간적 다변성을 지닌 수문학적 인자에 좌우되기 때문에 수문모의를 위해서는 많은 매개변수와 다양한 정보들이 필요하다. 본 연구에서는 지형자료를 활용하기 위한 GIS 기법과 유출분석을 위한 NRCS(Natural Resources Conservation Service) 방법을 이용하여 빈도별 유출양상을 분석하는 것을 목적으로 하였다. FARD 2002 프로그램을 이용하여 확률강우량을 분석하였으며, 대상유역인 보청천 산성유역에 대한 확률강우량은 Log-Pearson Type III가 가장 적합한 분포형으로 나타났다. 유역의 지형학적 특성을 규명하기 위한 DEM 자료의 분석은 TOPAZ 프로그램을 이용하였다. 유역 내 유효우량 산정을 위해 토지이용도와 토양도를 이용하여 NRCS curve number를 산정하였다. NRCS 방법의 적용을 위한 호우형태는 Type II와 Type III를 적용하였다. 적용 결과, 재현기간이 80년 빈도 이상인 호우에 대해서는 Type II, Type III에 상관없이 비슷한 양상으로 나타났다. 또한 대상유역의 하천정비기본계획보고서에서 제시한 빈도별 홍수량과 비교한 결과 재현기간 80년과 100년 빈도 홍수량에 대하여 상대오차가 각각 7.65%와 5.33%로서 비슷한 유출량을 나타내었다.
High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.