• Journal of the Korean Applied Science and Technology
• /
• v.27 no.1
• /
• pp.6-13
• /
• 2010

Esterification reaction between succinic acid and 1,4-butanediol was kinetically investigated in the presence of nontoxic organometallic compound catalyst(ESCAT-100E) at $150-190^{\circ}C$. The reaction rates measured by the amount of distilled water from the reaction vessel. The Esterification reaction was carried out under the first order conditions respect to the concentration of reactants, respectively. The overall reaction order was 2nd. The linear relationship was shown between apparent reaction rate constant and reciprocal absolute temperature. By the Arrhenius plot the activation energy have been calculated as 376.13 kJ/mol under nontoxic organometallic compound catalyst and also apparent reaction rate constant, k' was found to obey first kinetics with respect to the concentration of catalyst.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.362-369
• /
• 2009

Esterification reaction between succinic acid and 1,4-butanediol was kinetically investigated in the presence of monobutyl tinoxide catalysts at $150{\sim}190^{\circ}C$. The reaction rates measured by the amount of distilled water from the reaction vessel. The esterification reaction was carried out under the first order conditions with respect to the concentration of reactants, respectively. The overall reaction order was 2nd. The linear relationship was shown between apparent reaction rate constant and reciprocal absolute temperature. By the Arrhenius plot the activation energy have been calculated as 87.567 kJ/mol under monobutyl tinoxide catalyst and also apparent reaction rate constant, k' was found to obey first kinetics with respect to the concentration of catalyst.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.2
• /
• pp.165-170
• /
• 1998

Lipase-catalyzed esterification of n-butyl oleate was carried out in n-hexane as a model reaction. The optimal activity of Candida rugosa lipase was shown in a water activity ($a_w$) range of 0.52 to 0.65 at $30^{\circ}C$. The water produced from the esterification was removed by a tubular type pervaporation system. The rate of ester formed from the enzymatic esterification was allowed to be the same as the rate of water removal by maintaining an optimal $a_w$ of the reaction system using an on-off dewatering control device. The reaction rate and yield with a$a_w$ control were increased two folds higher than the respective values for the uncontrolled reaction.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3410-3414
• /
• 2013

Atom-economical esterification is of great importance in green chemistry. In this work, we demonstrated the catalyst and additive free esterification of alcohols by their reaction with 2-acyl-4,5-dichloropyridazin-3(2H)-ones without solvent at $100^{\circ}C$. Aliphatic and aromatic alcohols were converted into the corresponding esters in good to excellent yields. It is noteworthy that the reaction is solvent-free, atom-economic, easy-workup, and rapid and that the process is inexpensive.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.532-535
• /
• 2009

In this study, the fatty acid methyl ester was prepared from the vegetable oil by inducing ultrasound energy. The ultrasound energy was applied to the esterification reaction for heating and stirring effects. Ultrasonic induction results in the shortened reaction time and brings the increase of the methyl ester yield. However, the continuous introduction of ultrasound during the esterification reaction results in temperature increase, then the over-heating of reaction temperature was ineffective. Therefore, the system temperature was controlled at constant temperature state with the cooling circulation. The ultrasound induction reaction had the fatty acid methyl ester yield of 93% at the reaction time was 30 minutes, faster than the traditional esterification process.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.143-154
• /
• 2016

Acetic acid can be removed from wastewater by esterification in a membrane reactor. Pervaporation membrane reactor (PVMR) is an alternative process to conventional separation processes. It is an environmentally friendly process. The main advantages of the PVMR are simultaneous water removal and production of an ester economically. In this study, the synthetic wastewater has been used. Esterification reaction of acetic acid with isopropanol has been studied in the presence of tungstosilicic acid hydrate as a catalyst in a batch reactor and in a PVMR. The effects of important operating parameters such as reaction temperature, initial molar ratio of isopropanol to acetic acid and catalyst concentration has been examined. Removal of acetic acid (conversion of acetic acid) was obtained as 85% using a PVMR by removal of water from the reaction mixture.

• Advances in Traditional Medicine
• /
• v.7 no.2
• /
• pp.171-181
• /
• 2007

Metal binding activity of the pectin samples with different physicochemical properties was studied. It was found that in vitro copper binding capacity of pectins is depending on the following factors: degree of esterification, content of non-methylated anhydrogalacturonic acid, and pH of solution. There was found that the maximum copper uptake capacity increases correspondingly to reduction of the degree of esterification of pectin, rise of the non-methylated anhydrogalacturnic acid content and the solution pH. It is proposed to use for standardization of pectin samples such parameters as the degree of esterification, content of anhydrogalacturonic acid, and intrinsic viscosity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.108.2-108.2
• /
• 2011

This presentation shows energy-efficiency of microwave-accelerated esterification of free fatty acid with a heterogeneous catalyst by net microwave power measurement. In the reaction condition of 5wt% sulfated zirconia and 1:20 molar ratio of oil to methanol at $60^{\circ}C$ and atmospheric pressure, more than 90% conversion of the esterification was achieved in 20 minutes by microwave heating, while it took about 130 minutes by conventional heating. Electric energy consumption for the microwave heating in this accelerated esterification was only 67% of estimated minimum heat energy demand because of significantly reduced reaction time.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.735-741
• /
• 2008

In our previous study, a surfactant-coated Candida rugosa lipase immobilized in microemulsion-based organogels was exploited for the synthesis of ethyl isovalerate. In the present study, we are focusing on the effective reuse of lipase immobilized in microemulsion-based organogels (MBGs) in terms of retainment of the catalytic activity. As water is one of the co-products in esterification reactions, the removal of water becomes a priority to allow the reaction to work in the forward direction and to prevent back hydrolysis. Taking this fact into consideration, the lipase-containing microemulsion-based organogels were given pretreatment and/or several intermittent treatments with dry reverse micellar solution of AOT in organic solvent during repeated cycles of ester synthesis. The pretreated MBGs with dry reverse micellar solution exhibited lower water content and higher initial rates of esterification in comparison with untreated freshly prepared MBGs. The esterification efficiency of untreated MBGs started decreasing after 5 cycles of reuse and was almost completely lost by the end of the $8^{th}$ cycle. In contrast, pretreated MBGs exhibited a gradual decrease in esterification efficiency after 5 cycles and retained about 80% of the initial activity at the end of the $8^{th}$ cycle. The intermittent treatment of MBGs after every 3 cycles resulted in enhanced reusability of immobilized lipase for up to 9 cycles without significant loss in esterification activity, after which it resulted in a slow decrease in activity with about 27% lower activity at the end of the $12^{th}$ cycle. Furthermore, the treatment conditions such as concentration of AOT in liquid dessicant and time of treatment were optimized with respect to our system. The granulated MBGs proved to be better in terms of initial esterification rates (1.2-fold) as compared with the pelleted MBGs.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.543-548
• /
• 2002

The enantioselective esterification of racemic ibuprofen catalyzed by a Candida rugosa lipase was studied according to reaction conditions such as a lipase concentration, reaction temperature, alcohol chain length and alcohol concentration. The S-(+)-ibuprofen alkyl esters prepared were converted to S-(+)-ibuprofen by hydrolysis with sulfuric acid as a catalyst. High conversions in the esterifications were obtained at 60$^{\circ}C$ and an equimolar ratio of octanol to ibuprofen. The initial reaction rate of the esterification decreased with increasing octanol concentration. Conversion and initial reaction rate increased with increasing alcohol chain length. Values of enantiomeric excess(ee) according to esterification reaction conditions did not change below 60$^{\circ}C$. On the other hand, values of conversion and ee for the chemical hydrolysis of S-(+)-ibuprofen alkyl esters were independent of alcohol alkyl chain length. Optical resolution of racemic ibuprofen was achieved by lipase catalyzed esterification and chemical hydrolysis. The separation method provided a high yield and enantioselectivity for the production of S-(+)-ibuprofen from racemic ibuprofen.