• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.87-95
• /
• 2006

There are hundreds of ship blocks which are under the block assembly, painting, and outfitting assembly works in the pre-erection shops of shipyard. Generally, each block is planned to be processed in a pre-erection shop according to the block type by the long-term production-scheduling before six months. However, many blocks can't be processed in the planned time and the planned shop since the before and after block-processing changes or delays the planned sequential works in pre-erection shops. Therefore, it is essential to monitor the current location of each block and work in process to cope with the changed situation of pre-erection shops. Present study integrates PDA, GPS, and CDMA not only to chase the location of each block but also to exchange the pre-erection work order and the work report between the production-scheduling server and the production managers in the pre-erection shops. This study shows a prototype for the block tracing and process monitoring in the pre-erection shops.

• 한국축산식품학회지
• /
• 제37권2호
• /
• pp.288-296
• /
• 2017

We investigated the effects of fermented red beet extract and ascorbic acid on color development in meat emulsions. The pH of meat emulsions containing red beet extract decreased with an increase in the amount of extract added. The redness of the treated meat emulsions was higher than that of the control with no added nitrite or fermented red beet extract (p< 0.05), though the redness of the meat emulsions treated with fermented red beet extract only was lower than in that treated with both fermented red beet extract and ascorbic acid (p<0.05). The highest VBN, TBARS, and total viable count values were observed in the control, and these values in the meat emulsions treated with fermented red beet extract were higher than in that treated with both fermented red beet extract and ascorbic acid (p<0.05). E. coli and coliform bacteria were not found in any of the meat emulsions tested. Treatment T2, containing nitrite and ascorbic acid, had the highest overall acceptability score (p<0.05); however, there was no significant difference between the T2 treatment and the T6 treatment, which contained 10% pre-converted nitrite from red beet extract and 0.05% ascorbic acid (p>0.05). The residual nitrite content of the meat emulsions treated with ascorbic acid was lower than in those treated without ascorbic acid (p<0.05). Thus, the combination of fermented red beet extract and ascorbic acid could be a viable alternative to synthetic nitrite for the stability of color development in meat emulsions.

• 물과 미래
• /
• 제26권3호
• /
• pp.87-101
• /
• 1993

하천에서의 동수역학적 유동해석을 위하여 2차원 천수방정식을 기본방정식으로 하고 이를 불연속구간함수와 upwinding weighting을 도입한 감쇠형 Galerkin 방법에 의하여 해석하는 RIV-FEM2를 개발하였다. RIV-FEM2는 전처리, 주처리, 후처리 과정으로 구성되었으며, 전처리와 주처리 과정은 Fortran-77으로, 후처리 과정은 turbo-Pascal에 의하여 각각 처리할 수 있도록 개발하였다. 2차원의 만곡부, 교량부, 축소부를 가진 대칭수로부등의 경우와 실제 하천에 대하여 본 모형을 적용한 결과 유속분포, 수면형 및 질량 유출입량 보존등의 면에서 안정성과 효율성이 우수하게 나타나 본 모형의 적용성을 입증할 수 있었다. 본 모형은 실제 하천의 이수 및 치수관리에 기여할 수 있을 것으로 판단된다.

• 대한음성학회지:말소리
• /
• 제62호
• /
• pp.85-96
• /
• 2007

In this paper, we carried out recognition experiments for noisy speech having various levels of car noise and output of an audio system using the speech interface. The speech interface consists of three parts: pre-processing, acoustic echo canceller, post-processing. First, a high pass filter is employed as a pre-processing part to remove some engine noises. Then, an echo canceller implemented by using an FIR-type filter with an NLMS adaptive algorithm is used to remove the music or speech coming from the audio system in a car. As a last part, the MMSE-STSA based speech enhancement method is applied to the out of the echo canceller to remove the residual noise further. For recognition experiments, we generated test signals by adding music to the car noisy speech from Aurora 2 database. The HTK-based continuous HMM system is constructed for a recognition system. Experimental results show that the proposed speech interface is very promising for robust speech recognition in a noisy car environment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.219-222
• /
• 2007

Today, use of high resolution satellite image with at least 1m resolution is expanding into many more areas including forest, river way, city, seashore and so forth for disaster prevention. Interest in this medium is increasing among the general public due to the roll-out to the private sector as Google earth, Virtual Earth and so forth. However, pre-processing process that revises the geometrical distortion that result at the time of photographing is required in order to use high resolution satellite image. The purpose of this research is to search the most accurate GCP(Ground Control Point) information acquisition method that is used for the revision of high resolution satellite image's geometrical distortion through automated processing. Through this, it is possible to contribute to increasing the level of accuracy at the time of high resolution satellite image revision and to secure promptness.

• 한국축산식품학회지
• /
• 제35권4호
• /
• pp.494-501
• /
• 2015

The aim of this study was to examine the effectiveness of pre-cooking conditions on the quality characteristics of ready-to-eat (RTE) Samgyetang. Raw chickens were steamed under the different conditions of 50℃/30 min (T1), 65℃/30 min (T2), 85℃/30 min (T3), and 90℃/10 min (T4) prior to retorting at 120℃ for 65 min. The results showed that pre-cooking conditions in all treated samples could reduce fat contents in breast and leg meats by 8.5-11.7％ and 10.0-11.0％ compared to the control, even though there were no significant differences among treatments (p>0.05). The L* and b* values of breast and leg meats treated with the higher temperature and longer time conditions were significantly higher than the control (p<0.05), while a* values tended to decrease despite of not to a significant extent (p>0.05). Moreover, apparent viscosity and water soluble protein showed insignificant differences (p>0.05) among the samples as a result of the retorting process, which might have more negative influences on the quality. T2 samples obtained significantly the highest average Quantitative Descriptive Analysis (QDA) score and transmittance value, representing the most clear broth among the samples, compared to the control. On the other hand, T3 showed the highest cooking loss among the treatments and the lowest QDA scores among the samples. In conclusion, pre-cooking treatment prior to retorting in manufacturing Samgyetang is a plausible way to reduce its fat content. A pre-cooking condition at either 65℃ for 30 min, or 90℃ for 10 min are recommended for producing Samgyetang with optimum quality.

• Clinical and Experimental Reproductive Medicine
• /
• 제48권3호
• /
• pp.255-261
• /
• 2021

Objective: This study aimed to investigate sperm motility and its changes after preparation as predictors of pregnancy in intrauterine insemination (IUI) cycles. Methods: In total, 297 IUI cycles from January 2012 to December 2017 at a single tertiary hospital were retrospectively analyzed. Patient and cycle characteristics, and sperm motility characteristics before and after processing were compared according to clinical pregnancy or live birth as outcomes. Results: The overall clinical pregnancy rate per cycle was 14.5% (43/297) and the live birth rate was 10.4% (30/289). Patient and cycle characteristics were similar between pregnant and non-pregnant groups. Sperm motility after preparation and the total motile sperm count before and after processing were comparable in terms of pregnancy outcomes. Pre-preparation sperm motility was significantly higher in groups with clinical pregnancy and live birth than in cycles not resulting in pregnancy (71.4%±10.9% vs. 67.2%±11.7%, p=0.020 and 71.6% ±12.6% vs. 67.3%±11.7%, p=0.030, respectively). The change in sperm motility after processing was significantly fewer in the non-pregnant cycles, both when the comparison was conducted by subtraction (post-pre) and division (post/pre). These relationships remained significant after adjusting for the female partner's age, anti-Müllerian hormone level, and number of pre-ovulatory follicles. According to a receiver operating characteristic curve analysis, an initial sperm motility of ≥72.5% was the optimal threshold value for predicting live birth after IUI. Conclusion: Initial sperm motility, rather than the motility of processed sperm or the degree of change after preparation, predicted live birth after IUI procedures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.409-412
• /
• 2000

A high performance EEG signal measurement system is fabricated. It consists of high precision pre-amplifier and auto identification bandwidth unit. High precision pre-amplifier is composed of signal generator, signal amplifier with a impedance converter, body driver and isolation amplifier. The pre-amplifier is designed for low noise characteristics, high CMRR, high input impedance, high IMRR and safety, Auto identification bandwidth unit is composed of AD-converter and PIC micro-controller for real time processing EEG signal. The performance of EEG signal measurement system has been shown the classified bandwidth through the clinical demonstrations.

• 한국항행학회논문지
• /
• 제11권3호
• /
• pp.337-342
• /
• 2007

본 논문에서는 현재 국내 ETCS(Electrical Toll Collection System)에 적용될 예정에 있는 후불식 지불 방식에 있어서 수행해야할 전자 신용카드(EMV) 처리절차를 제안한다. 현재 국내에서는 한국도로공사의 하이패스, 터치패스 시스템이 비접촉식 ETCS로 운영되고 있으며, 현재의 운영 방식은 일종의 전자화폐 개념의 선불(pre-paid)식이다. 이에 반해 후불(credit)식은 신용카드 기반의 지불을 수행함으로써 미리 지불할 필요가 없다는 장점이 있다. 현재 국내의 ETCS에 후불식의 도입이 준비 중에 있으며, 본 논문에서는 이러한 후불식 지불에서 고려해야 할 EMV 처리 방식을 제안한다.

• 소성∙가공
• /
• 제9권5호
• /
• pp.463-468
• /
• 2000

An experimental study has been performed to investigate the forming characteristics of pre-coated metals(PCMs) widely used in domestic appliances through Erichsen tests and deep drawing tests. Erichsen tests are performed to find out the forming limits of seven pre-coated metals in normal conditions. Rectangular deep-drawing tests are carried out to know the effects of die materials and blank metals on forming loads and surface defects of final PCM products. In the deep-drawing test, four die materials ［STD11(TiCN), STD11, STD11(TD), AMPCO] are used. In the Erichsen test, the forming limits of PCMs are obtained from flaking or crack of pre-coated films and lower than those of base metals. In respect of surface roughness and forming load, STD11(TD) and AMPCO materials are superior to my other die-materials used in the deep-drawing test.