• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.135-142
• /
• 2010

연구목적: 최근CAD/CAM으로 제작한 지르코니아 코어의 변연적합도에 관한 연구가 많이 진행되었지만, 여러 종의CAD/CAM 시스템의 변연 뿐만 아니라 내면적합도까지 상호 비교한 연구는 아직 미흡한 실정이다. 따라서 본 연구에서는 3종의CAD/CAM 시스템으로 제작한 전치부 단일 치아 지르코니아 코어의 변연 및 내면적합도를 Replica technique을 이용해 평가하고자 하였다. 연구 재료 및 방법:3종의CAD/CAM 시스템 (Cerasys $system^{(R)}$, KaVo $Everest^{(R)}$, $LAVA^{TM}$)을 이용하여, 시스템 별로 5개씩의 단일치아 지르코니아 코어를 제작하였다. 제작된 지르코니아 코어를 레플리카 테크닉 (Replica Technique)을 이용해 복제하고 복제된 시편을 협설, 근원심으로 정중앙을 절단하여 변연 및 내면의 간격을 측정하였다. Measuring microscope ($AXIO^{(R)}$)를 이용하여 50배 확대하여 촬영하고 $I-Solution^{(R)}$을 이용하여 측정하였고, ANOVA를 이용하여 통계적으로 분석하였다. 결과:지르코니아코어의 평균 변연간격은 $Cerasys^{(R)}$가 $84.74{\pm}27.57{\mu}m$, KaVo $Everest^{(R)}$가 $80.23{\pm}21.07{\mu}m$, $Lava^{TM}$가 $96.37{\pm}11.45{\mu}m$이었고 평균내면간격은각각 $Cerasys^{(R)}$는 $94.99{\pm}18.74{\mu}m$, KaVo $Everest^{(R)}$는 $92.31{\pm}25.18{\mu}m$, $LAVA^{TM}$는 $94.99{\pm}18.74{\mu}m$이었으며, 세 시스템간의 변연 및 내면간격의 평균적인 적합도에서 통계적 유의차는 없었다. 변연 및 내면간격의 비교에서는 KaVo $Everest^{(R)}$가 $LAVA^{TM}$보다 전반적으로 내면간격이 작은 것으로 보였다 (P< .05). 내면간격 중 절단부위의 간격은 세 시스템에서 공통적으로 다른 부위보다 크게 나타났다. 결론:본 연구에서 $Cerasys^{(R)}$, KaVo $Everest^{(R)}$, $LAVA^{TM}$시스템의 변연적합도는 차이가 없었고, 내면적합도는 KaVo $Everest^{(R)}$가 $LAVA^{TM}$ 보다 적었으나 세 시스템에서 공통적으로 절단부위 간격이 크게 나타났다. 세 시스템 모두 변연적합도 및 내면적합도가 임상적으로 허용범위 내에 있었다.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.51-60
• /
• 1990

Dose distributions around Co- 60 moving source in high dose rate remote afterloading unit, Buchler 3K unit, were experimented with X-omat V films and calculations. In our experiments, film dosimetries have achieved to evaluated the axial dose distributions for source oscillations were 0, 3.5, 5.0 and 6.0 cm in periodically, In results, the dose distributions in axial of source movement showed apparently higher than in transverse direction caused by source locations, dwelling time and air gap in the applicator. In the calculations, the dose rate was derived by using the inverse square law, filteration corrections and Meisberger constant for scatter corrections as source movings. In our experiments and calculations, the average dose uncertainties were showed -2.1$\pm$1.9% in fixed sourdce, -2.9$\pm$1.8%, -7.4$\pm$6.1% and -6.7$\pm$4.6% at 3.5 cm, 5.0 cm and 6.0 cm source oscillations, but the calculations have showed very close to experimental dose rate within 4 cm distance from source.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.549-552
• /
• 2002

$(SrBi_2Nb_2O_9)_{0.5}-(Bi_3TiNbO_9)_{0.5}$ ceramics were fabricated by the mixed-oxide method, and the structural and electrical properties with variation of ball-milling time were investigated. All SBN-BTN specimens showed the typical polycrystalline X-ray diffraction patterns without the presence of the second phase. The SBN-BTN specimen sintered at $1200^{\circ}C$ and ball-milled for 168h showed the average grain size of $16{\mu}m$. The dielectric constant and dielectric loss of the SBN-BTN specimen sintered at $1150^{\circ}C$ and ball-mill for 72h were 225, 0.4% at 1KHz, respectively.

• 한국패류학회지
• /
• 제2권1호
• /
• pp.26-29
• /
• 1986

Corbicula fluminea, one of the 2 species in the family Corbiculidae living in the Lake Uiam, was used as an experimental material and the embryonic development and the structure of glochidia of this species were investigated. This freshwater mussels was oviparous, but some ovoviviparous: incubated their youngs in the inner-demibranchs or outer-demibranchs, however, chiefly used the inner-demibranchs as brood-pouch. The average time required from a fertilized egg to two-cell stage, veliger stage, and glochidium was 76 minutes, 3 hours, and 17 hours, respectively, The mean size of glochidium was $168{\mu}m$ in shell height, $195{\mu}m$ in shell lengh, $114{\mu}m$ in hinge legth and the form of glochidium was D-type and had no hooks or hooklets for attaching to fish like Unioidae.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• 한국항만경제학회지
• /
• 제38권2호
• /
• pp.139-152
• /
• 2022

본 논문에서는 개별적 기업을 대상으로 표본을 수집하여 심층적으로 근로자 임금(평균연봉)에 대해 영향을 미치는 요인을 분석하고자 한다. 기업의 근로자 평균연봉과 함께 초임 평사원의 평균연봉에 대해서 깊이 있는 분석을 하고자 한다. 구체적으로 초임 평사원의 학력별로 초대졸, 대졸, 대학원졸 평균 연봉에 미치는 기업 규모, 자본과 노동의 생산구조, 사업의 주된 분야의 영향을 설명하고자 하였다. 물류기업의 초임 평사원의 평균연봉 차이는 매출액에 미치는 주된 사업이 결정적 요인변수이며, 학력과 관련하여 초대졸과 대졸은 외항여객화물운송업 및 항만운영및하역관리업이 높은 연봉을 제공하였고 육상화물운송업 및 창고업은 낮은 연봉을 제공하고 있었다. 그 외에도 우리나라 물류기업은 본사지 위치, 종업원 수, 매출액 대비 인건비 비중, 매출에 미치는 주된 사업의 4개 특성요인간에 모두 관련성을 가지고 있었다. 이 같은 사실이 서울 소재의 외항여객화 물운송업이나 기업물류대행업, 복합운송및국제운송중계업은 대기업이며, 인건비 비중은 낮으며 자본·기술·정보 집약적 투자에 더 많은 비중을 가진 사업구조라는 사실이다.

• 한국농촌생활과학회지
• /
• 제5권1호
• /
• pp.31-41
• /
• 1994

The purpose of this study is to analyze the changes of rural housing conditions by comparing the general housing indicators of rural area and those of urban. For those purposes, the indicators that present the housing conditions are set up, and the changes of average housing conditions are analyzed by a region : Shis(cities), Ups, Myons. For the analysis, Population and Housing Census Report and related data were used. Rural housing conditions have become better since the 1960s in the aspect of quality. They are, however, relatively much worse than those of urban areas. The gap of housing conditions between urban and rural housing is big, especially in qualitative indicators, which are housing facilities. Quantitative indicators, which are housing supply rate and ownership rate, are better than urban conditions.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.3-12
• /
• 1984

This paper is to suggest the optimum structure and the rating scale of PANSORI hall. The method of this study is as follows. 1. Consideration for the characteristics of OPANSORI and Beranek's music & acoustic theory. 2. To take advice from the expert. 3. The experiment and evaluation of a model. 4. The structure of PANSORI hall and the study of the availability in Beranek's rating scale of orchestra and opera. 5. The establishment of the rating scale in PANSORI hall. 6. The evaluation of the forms of performance in each hall. The result of this study, the proper hall in the performance of PANSORI is, 1. The initial time delay gap less than 25ms. 2. The reverberation time of the extents of 1.2 seconds. 3. The proper average bass ratio of 1.25 extents. 4. The distance from performers to audience is within 30 meters. 5. THE VOLUME OF HALL IS 450-7400 ㎥ extents. 6. It should be designed not to be a acoustical disturbancenoise, echo, and the unbalance of sound pressure level, etc.

• 천문학논총
• /
• 제11권1호
• /
• pp.263-277
• /
• 1996

We have intensively carried out numerical calculations on flare predictions from the solar activity data for photospheric sunspots, chromospheric flare and plages, coronal X-ray intensities and 2800MHz radio fluxes, by using multilinear regression method. Intensities of solar flares for the next day have been predicted from the solar data between 1977-1982 and 1993-1996. Firstly, we have calculated flare predictions with the multilinear regression method, by using separate solar data in growth and decay phase of sunspot area and magnetic field strength from the whole data on solar activities. Secondly, the same operations as above have been made for the remaining data after removal of the data with large deviation from the mean calculated by the above prediction method. we have reached a conclusion that average hit ratio of correct predictions to total predictions of flares with class of M5 over has been as high as 70% for the first case and that of correct prediction number to total observation number has been shown as 61%.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.78-82
• /
• 2021

The Ga₂O₃ single crystal was grown through a floating zone method, and its structural and optical properties were instigated. It has a monoclinic crystal structure with a (100) crystal orientation and an optical band gap energy of 4.6 eV. It showed an average transmittance of 70% in the visible region. At room temperature, its photoluminescent spectrum showed three different peaks: the ultraviolet at 360 nm, the blue-green at 500 nm, and the red peaks at 700 nm. Especially, at liquid nitrogen temperature, the ultraviolet peak was optically active while the others were quenched.