• 한국지진공학회논문집
• /
• 제25권6호
• /
• pp.261-266
• /
• 2021

Nuclear power plants in Korea were designed and evaluated based on the NRC's Regulatory Guide 1.60, a design response spectrum for nuclear power plants. However, it can be seen that the seismic motion characteristics are different when analyzing the Gyeongju earthquake and the Pohang earthquake that has recently occurred in Korea. Compared to the design response spectrum, seismic motion characteristics in Korea have a larger spectral acceleration in the high-frequency region. Therefore, in the case of equipment with a high natural frequency installed in a nuclear power plant, seismic performance may be reduced by reflecting the characteristics of domestic seismic motions. The failure modes of the equipment are typically structural failure and functional failure, with an anchorage failure being a representative type of structural failure. In this study, comparative analyses were performed to decide whether to consider the inelastic behavior of the anchorage or not. As a result, it was confirmed that the seismic performance of the anchorages could be increased by considering the inelastic behavior of an anchorage.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.72-82
• /
• 2022

항만에 배치되는 수역시설 중 정박지는 대상 선박이 주묘되지 않고 안전하게 정박할 수 있도록 충분한 수면적을 확보하여야 한다. 이러한 수면적의 계산 시에는 대상 선박의 전장, 수심, 저질 등의 요소를 고려하는 것이 일반적이다. 그러나, 국내 각 항만의 항만시설운영세칙(혹은 규정)에는 정박지의 선박수용능력 기준으로 총톤수를 사용하고 있다. 본 연구에서는 총톤수 단위의 정박지 선박수용능력기준을 선박의 전장으로 변환하여 실제 대상 선박의 투묘 중 선회 반경을 계산한 결과, 분석 대상 90개의 정박지 중 25개의 정박지(27.8%)에서 선회 반경이 지정된 수면적을 초과하는 것으로 나타났다. 이러한 분석 결과를 바탕으로, 국내 각 항만의 항만시설운영세칙(혹은 규정) 상 정박지 선박수용능력 기준을 전장으로 개정하고, 관련 해사 법령의 해당 조항 개정을 개선방안으로 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.123-135
• /
• 2006

대부분의 대공간 구조물은 도시의 상징물인 동시에 구조물의 용도를 만족하여야 하므로 기초가 구조물의 지지, 형태유지 또는 전도방지, 부력저항 등의 다양한 역할을 갖도록 설계되었다. 이에 따라 여러 형태의 기초가 도입되었는데 본 연구에서는 이중 구조물 형태유지 및 전도방지를 위해 앵커력을 도입한 두가지 월드컵 운동장의 경우를 비교 검토하여 건설공정에서 점검된 앵커력의 변화를 검토하였다. 본 연구에서는 반구형지붕의 바깥방향으로 작용되는 수평력 제어를 위해 시공된 앵커(Case1)와 캔틸레버 지붕의 전도방지를 위한 앵커(Case2) 2가지 사례에 대한 앵커력의 도입과정과 최초 앵커력 도입에 따른 대공간 구조물의 장기거동에 대하여 알아보았다.

• 한국항해학회지
• /
• 제17권3호
• /
• pp.69-76
• /
• 1993

In harbour the practical shiphandlers should have a expert knowledge of systematically reducing head-way and keeping ship's positions to the final position with confidence and under control. But now in the practical approaches we do not have any special maneuvers of controlling the ship effi-ciently regarding the headway and approaches except some existing reduction of speeds according to the Weight-to-Power Ratio, use of astern power and Rudder Cycling. Consequently this study put Woo's Super Rudder Controlling originally developed by Captain Woo, Ph. D. to practical use as a special maneuvers in the port approaches. The conclusions of this paper are drawn as follows : 1) Optimum standard and desirable controls in combination of three engine speeds with three yaw ang-les were proposed for the practical shiphandlers, 2) According to simulation of the pilotships the Super advances are 10.5 ship lengths for Full full full maneuvers, and 7.9 ship lengths for Full half maneuvers approximately, 3) Approach maneuvers to anchorages by trying Woo's Super Rudder Controlling saved about 30% of total standby time in comparison with the existing Weight-to-Power Ratio maneuvers in the Pusan and Kwang Yang ports.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.619-624
• /
• 2002

A prestressed/precast concrete system was used to build the new Asian Olympic Stadium Project in Pusan, Korea. The stadium(mainly intended for cycle racing) is designed for the 2002 Asian Olympic Games and has a seating capacity of 20,000 spectators plus a few private suites. More than 1300 prestressed/precast components were used and they include single columns, primary beams, cantilever beams, double riser stands, and double tees. Especially, a total of 24 cantilever beams is used on the fourth story for the stands and double tees. These 8m long beams are post-tensioned to prevent cracking, to increase their durability and to serve serviceability by vibration. A cantilever section with cast-in-place topping is 800mm wide and 1500mm deep. Cantilever beams are connected to the column with the corbel by cast-in place concrete. Bonded post-tensioning tendons were assembled at the job site. Dead-end anchorages were installed in the end of cantilever beams and live-end anchorage is the opposite of them. This article presents the geometric layouts, design features and so on.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.711-725
• /
• 2014

The purpose of this study is to evaluate the behavior and the strength of SRG (Steel Reinforced Grout) externally strengthened Reinforced Concrete (RC) beams by using a nonlinear numerical analysis. The numerical simulation was carried out by using a three-dimensional (3D) finite element model. An interface element with a suitable damage model was used to model the connection between concrete surface and SRG reinforcing layer. The reliability of the finite element 3D-model was checked using experimental data obtained on a set of three RC beams. The parameters taken into consideration were the external configuration, with or without U-end anchorages, the concrete strength, the amount of internal tensile steel reinforcement. Conclusions were made concerning the strength and the ductility of the strengthened beams by varying the parameters and on the effectiveness of the SRG reinforcing system applied with two types of external strengthening configuration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.991-996
• /
• 2001

The strengthening of concrete structures in situ with externally bonded fiber sheets is increasingly being used for repair and rehabilitation of existing structures. Because fiber sheets is attractive for this application due to its good tensile strength, resistance to corrosion, and low weight. But, debonding failure may occur at the beam ends that fiber sheet bonded to the soffit of a beam. The method which can prevent debonding failure is suggested and proved its efficiency by using CPS experimental test. And this paper summarized the results of experimental studies concerning the end-anchorage system. Results show that the suggested method is faithful in strengthening with CFS.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.57-70
• /
• 2018

For the long-term structural health monitoring of civil structures, the effect of ambient temperature variation has been regarded as one of the critical issues. In this study, a principal component analysis (PCA)-based algorithm is proposed to filter out temperature effects on electromechanical impedance (EMI) monitoring of prestressed tendon anchorages. Firstly, the EMI monitoring via a piezoelectric interface device is described for prestress-loss detection in the tendon anchorage system. Secondly, the PCA-based temperature filtering algorithm tailored to the EMI monitoring of the prestressed tendon anchorage is outlined. The proposed algorithm utilizes the damage-sensitive features obtained from sub-ranges of the EMI data to establish the PCA-based filter model. Finally, the feasibility of the PCA-based algorithm is experimentally evaluated by distinguishing temperature changes from prestress-loss events in a prestressed concrete girder. The accuracy of the prestress-loss detection results is discussed with respect to the EMI features before and after the temperature filtering.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.226-229
• /
• 2006

Strengthening with externally post-tensioned CFRP strips is more effective in increasing load carrying capacity of existing structures as well as reducing crack width and deflection. This study developed concrete embedded anchorages system for externally post-tensioned CFRP strips, and carried out experimental study to verify anchoring performance quantitatively. Through experimental results, anchoring strength of concrete embedded anchorage were quantified into shear strength of anchor bolt, bearing strength of concrete at the front of anchor plate and bond strength between anchor plate and concrete surface. In addition, overall anchoring performances according to combination of each unit force are examined in this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.238-241
• /
• 2006

The needs for strengthening and rehabilitation of the concrete bridges are a growing concern in many countries and has been emphasized in various researches and papers. Traditional external post-tensioning method using either steel bars or tendons is commonly used as a strengthening method. However, the method has some disadvantages such as stress concentration at the anchorages. Multi-stepwise thermal prestressing method is a newly proposed method for strengthening and rehabilitation of concrete girder bridges. Founded on a simple concept of thermal expansion and contraction of steel, the method is a hybrid method of external post-tensioning and steel plate bonding, combining the merits of two methods. In this paper, basic concepts on strengthening and rehabilitation of concrete girder are presented and an illustrative experiment is introduced.