• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.89-96
• /
• 1989

Engine analyzer is developed with the aids of personal computer, A/D converter, interfacing signal transducer and data processing computer programs. The objective of this development are that it should firstly be produced at the resonable low price compared with imported one taking advantage of using existing personal computer and printer, and it should also give good quality of performance. For the attainment of this objective, A/D converter should have been developed to meet the price limit of the equipment. The experiment is performed in a 4 cycle 4 cylinder gasoline engine by this analyzer, and all the information which are necessary for the combustion analysis can be obtained through the processing of the pressure data that are stored in the computer. These are pressure-volume curve, pressure-crank angle curve, the rate of pressure rise and heat release versus crank angle curve etc. With this developed experimental system of resonable price, it will be considered that more easy way of engine data pick-up and processing is possible.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.5
• /
• pp.1337-1340
• /
• 2007

Pulse diagnosis is one of the typical examination methods in traditional oriental medicine. However, it is necessary to obtain the objectivity for the standardization of this diagnosis. For this purpose, the pulse analyzer has been devised and studied, and the tonometric pulse analyzer displaying the pulse wave and its variables was developed recently. In this study, we investigated the effect of the sexuality of the individuals on the differences of the pulse wave as well as the correlation between the weight and the pulse wave to interrogate whether the pulse difference is not caused by the difference of sex but the size of individual.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.809-813
• /
• 2010

Frequency domain measurement of propagation loss for ultra high frequency (UHF) partial discharge in the winding of power transformer using a spectrum analyzer and pulse generator is presented. We compared the performance of the method using a network analyzer with and without a winding. Using a network analyzer simplifies the measurement and offers better dynamic range and frequency range. It also provides precise propagation loss within the winding in frequency domain at UHF range. We applied this method to measure UHF propagation loss of transformer mock-up, modeled 154 kV 20 MVA power in KEPCO substation.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.18 no.2
• /
• pp.51-62
• /
• 2014

Objectives The purpose of this study was to determine whether a pulse analyzer was useful to characterize the variables of pulse wave of hypertension (HT), compared with those of normal blood pressure group (NP). Methods The subjects were 22,646 who worked at car manufacturing factory. The pulse wave variables and pulse types measured in Guan by DMP 1000. Results In the main and secondary pulse type, there were significant differences between HT and NP. Whereas, in the field of pulse wave variables, no specific differences were between HT and NP. Conclusion Although pulse wave variables were not statistically significant, pulse analyzer might have reliable diagnostic sensitivity between hypertension and non-hypertension population.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.976-979
• /
• 1992

There are lots of problem which are delaminations and partial discharge of insulation materials in high-voltage rotating machines caused by mechanical, electrical and thermal aging. Several experiments have been aiming at finding the useful diagnostic parameters from the partial discharge characteristics by applying a new measurement techniques. This paper deals with the partial discharge characteristics (pulse height, pulse angle, pulse frequency spectrum and time interval), which may be a useful diagnostic concept in predicting insulation condition of mica/epoxy composite insulation materials, by using several measurement equipments (frequency spectrum analyzer. multichannel analyzer and time interval analyzer).

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.253-258
• /
• 1998

The part I was for developing regression models to predict the moisture content, protein content and viscosity of brown and milled rice using Near Infrared(NIR) Reflectance analyzer. The purpose of this study(part II) is to measure fundamental data required for the prediction of rice quality, and to develop regression models to predict the protein content of brown and milled rice, brown rice yield from undried paddy powder by using Near Infrared(NIR) Reflectance analyzer. The results of this study were summarized as follows : The predicted values of protein contents obtained from the undried paddy powder were well correlated to the measured values from brown and milled rice. The predicted yields of brown rice from undried paddy powder were not well correlated to the lab measured values from dried paddy. Continuous study in wavelength selection and of constituent relationship is necessary for practical application.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1823-1825
• /
• 2007

Based on Faraday effect, the variation of current flowing through the conductor can be encoded as that of azimuth angle of light polarization propagating through the fiber coil wound onto the conductor. The amount of current can be obtained by measuring the variation of the light intensity transformed from that of the azimuth angle through a polarization analyzer. In this paper we propose a fiber-optic current sensor system that employs a fiber polarization analyzer as a sensor interrogation device. The fiber polarization analyzer was prepared by inscribing a long-period fiber grating on a high birefringent fiber. At the fixed wavelength of 1522.5 nm, the fabricated fiber device has the polarization extinction ratio of more than 25 dB. The measurement of large current up to 600 Arms was accomplished based on a simple fiber interrogation device and the measurement output of the sensor system showed a good linearity.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.06b
• /
• pp.171-177
• /
• 1998

The part Ⅰ was for developing regression models to predict the moisture content, protein content and viscosity of brown and milled rice using Near Unfrared (NIR) Reflectance analyzer. The purpose of this study(part Ⅱ) is to measure fundamental data required for the prediction of rice quality , and to develop regression models to predict the protein content of brown and milled rice, brown rice yield from undreid paddy powder by using Near Infrared (NIR) Reflectance analyzer. The results of this study were summarized as follows . The predicted values of protein contents obtained from the undried paddy powder were will correlated to the measured values from brown and milled rice. The predicted yields of brown rice from undried paddy powder were not well correlated to be lab measured values from dried paddy. Continuous study in wavelength selection and of constituent relationship is necessary for practical application.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.480-484
• /
• 2008

DNP3.0은 산업 분야에서 SCADA(Supervisory Control And Data Aquisition) system의 개방형 프로토콜로 사용되어지고 있다. 본 논문에서는 개발하거나 개발된 Module들 사이에서 송 수신되는 DNP3.0 PDU를 분석할 수 있는 기능을 제공하는 DPA(DNP3.0 Protocol Analyzer) Module을 설계 및 구현하였다. 해당 Master Station에서 Request 메시지를 생성하여 Outstation으로 전송하고 Outstation에서 수신된 Request 메시지를 분석하여 Response 메시지를 생성하여 Response 한다. 또한 Master Station 과 Outstation에서 DNP3.0 프로토콜을 사용하여 통신하는 중간에서 송 수신하는 메시지를 Monitoring한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.362-368
• /
• 2001

The goal of this paper is development ofa DSP based three phase power quality analyzer. Power analysis algorithm is a correlation function and it is accomplished using stand alone type TMS320C31 DSP(digital signal processor)board. Results of power analysis are displayed by LCD and D/A converter on the proposed system. Finally, this paper also goes on to discuss the performance of an instrument prototype, compared with one of those foreign models, both in terms of accuracy and speed of measurement.