• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.21-25
• /
• 2001

A methodology to predict the output performance of small hydro power using discharge of sewage treatment plant has been studied. Two sewage treatment plants existing in Chunrabuk-Do were selected and the output performance characteristics for these plants were analyzed, using developed model. As a result, it was found that the developed model in this study can be used to analyze the output characteristics for small hydro power using discharge of sewage treatment plant. Additionally, primary design specifications such as design flowrate, capacity, operational rate and annual electricity production were estimated and discussed for two plants.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권3호
• /
• pp.1-6
• /
• 2020

This paper presents the analysis results on the electrical output performance characteristics of a 746 W high temperature superconducting generator (HTSG). The HTS field winding is charged by non-contact excitation method, i.e., contactless superconducting field exciter (CSFE) which is originated by rotary flux pump based on permanent magnet. In this paper, the preliminary current charging test was carried out using a 70 A CSFE to evaluate the performance of field exciter and analyze its non-contact excitation characteristics for the full-scale HTS field winding of the 746 W HTSG. First, the various contactless current-charging tests were conducted using assembly with HTS field winding and CSFE. Then, in order to estimate the output power performance characteristics of the 746 W HTSG, finite element analysis was conducted based on field excitation information which is experimentally measured under various operating conditions. Finally, the electrical output characteristics in no-load and load models were simulated by two-dimensional transient solver in ANSYS electromagnetics 19.0 release.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.448-456
• /
• 2012

This paper presents a multilevel inverter configuration which is designed by insertion of a bidirectional switch between capacitive voltage sources and a conventional H-bridge module. The modified inverter can produce a better sinusoidal waveform by increasing the number of output voltage levels. By serial connection of two modified H-bridge modules, it is possible to produce 9 output voltage levels including zero. There are 24 basic switching patterns with the 9 output voltage levels. Among the patterns, we select the 2 most efficient switching patterns to get a lower switching loss and minimum dv/dt stress. We then analyze characteristics of Total Harmonic Distortion (THD) of the output voltage with variation of input voltage by computer-aided simulations and experiments.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.29-34
• /
• 2017

This study analyzed a life test method for a power take-off (PTO) gearbox. An engine transfers mechanical power (rotation and torque) to a hydraulic pump through a PTO Gearbox with one input shaft and three output shafts. PTO gear box durability under high loads over long time periods was tested using dynamometers. In order to reflect the rated operating conditions, power must be distributed to each output shaft, and experiments were conducted under various conditions to verify the characteristics of the distributed power. An accelerated life test was designed using speed and torque as acceleration factors. Also, efficiency tests were conducted under various load conditions. Also, a lubrication oil composition analysis was performed to analyze gearbox wear status.

• 한국광학회지
• /
• 제8권3호
• /
• pp.204-208
• /
• 1997

고리형 레이저에서 단일모드로 발진되는 양방향 광속의 출력세기를 맥스웰-블로흐 방정식을 사용한 준고전적 모형으로 분석하였다. Nd:YAG를 레이저 매질로 설정하고, 한쪽 방향의 광속이 반대 방향의 광속에 미치는 영향을 고려하여, 펌핑률과 감쇄율 및 진동수 어긋남에 따른 레이저 발진의 안정성과 출력변조를 조사하였다. 특히, 전산시늉을 통하여 진동수 어긋남에 따른 출력광속의 변화를 조사하고, 안정한 연속발진 조건을 규명하였다.

• 신재생에너지
• /
• 제9권1호
• /
• pp.44-50
• /
• 2013

In order to analyze the characteristics of tidal current power generation system, we measured the output power according to the stream velocity by a water tunnel system and a simulation in MATLAB/Simulink. The water tunnel system consisted of impeller tidal flow transducer and PMSG with rotor in the water. The simulation consisted of PMSG, the tidal current turbine, and back-to-back converter. Also, we simulated the characteristics of output power according to the change of blade length and angular velocity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.352-360
• /
• 2003

This paper deals with a simple method in order to analyze and compare the harmonic characteristics in the multi-level inverter. Generally, the magnitude of harmonic components becomes different according to the multi-carrier Pulse Width Modulation(PWM) techniques, the modulation index($M_i$) and the switching frequency The previous papers analyzed the harmonic characteristics from the viewpoint of the space voltage vector. Hence, the calculation of the harmonic vector becomes more difficult and complex in 4-level or over 5-level. However, the proposed method has reduced an amount of calculation and simplified the process of it, using the relationship between the reference voltage and the output phase voltage to the load neutral point. It is applied to the 5-level cascade inverter and the harmonic characteristics for each multi-carrier PWM technique are compared through the simulation.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1390-1395
• /
• 2006

본 논문에서는 FBG 필터로 구성된 DWDM용 OADM을 제안하고 그 온도 특성에 대해 연구하였다. 제안된 OADM의 온도 특성을 분석하기 위해서, OADM의 온도 응답을 구하고 수치 해석하였으며, OADM을 제작하여 그 출력 스펙트럼을 측정하였다. 그 결과로 부터 $-30^{\circ}C{\sim}90^{\circ}C$ 범위 내에서 제안된 OADM의 출력 스펙트럼 중심 파장이 약 0.01230$nm/^{\circ}C$로 변화함을 알 수 있었다.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.291-297
• /
• 1998

일반적으로 수치지도제작을 수행하기 위해서는 종이에 인쇄된 원도를 컴퓨터상에서 작업할 수 있는 수치자료로 변환하는 자료입력과정과 작업이 끝난 자료를 출력하는 도면출력과정에 입출력장비가 이용된다. 본 연구에서는 수치지도 작업과정에 수반되는 입력장비중 벡터형태의 자료를 직접적으로 생성할 수 있는 장점에 의해 부분 도화된 수정도화 원도의 입력시 주로 이용되는 디지타이저와, 작업의 용이성 에 의해 주로 원도의 입력과정에 이용되는 스캐너에 대해 작업방법 및 입출력장비 특성에 따른 위치오차를 분석하였으며, 출력장비에 따른 위치오차분석에서는 플로터방식과 출력도면의 재질에 따른 위치정확도를 분석하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.873-878
• /
• 1994

Application of the filtered-x LMS adaptive filter to active noise cancellation requires to estimate the transfer characteristics between the output and the error signal of the adaptive canceller. We analyze the effects of estimation accuracy on the convergence behavior of the canceller when the input noise is modeled as a sinusoid.