• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.52-58
• /
• 2016

Purpose Recent retrospective studies are being actively conducted to analyze the survival of patients with SUVmax, MTV, TLG, such as information from a variety of PET originating. However, there is no clear way is difficult to accurately measure the volume of the tumor may be the difference between the caster is raised. In this study, to evaluate compare the volume measuring methods according to the characteristics of the tumor. Materials and Methods 18F-saline to fill the NEMA IEC Body Phantom insert the volume of balance and imbalance in phantom were acquired to the Biograph truepoint 40 (Siemens medical system, Germany) PET/CT scanner. The ratio of the volume and Background was acquired as 3.0, 5.0, 8.0, 18, 40. Clinical patients were randomly selected 120 people in staging patients with cancer of the digestive system from the year 2010 until the year 2014. Measurement methods were used a 40% threshold, 50% threshold and gradient segmentation technique, i.e. PET EDGE. Five years of experience of the two radio-technologist and one doctor was measured by repeated three times. Analysis methods were Intraclass correlation coefficient and Pearson correlation. Results In Phantoms, the 40% threshold method gave the best concordance between measured and actual volumes (r = 0.992, 0.997). In clinical patient outcome agreement between observers EDGE it is as high as 0.999 (CI: 0.998-0.999). And there were no statistical significance of the difference between the measurements (P = 0.620). 40% threshold method showed the best correlation between the measurements (r = 0.953). Increasing the ratio of tumor to background decreased the influence of a measuring method. Conclusion How to measure volume of the tumor in the patient was clinically most useful is 50% and the lowest impact on the characteristics of the tumor. Therefore, to reduce the background of the patients in PET/CT scan, it should be required research and effort.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.15-24
• /
• 2013

Purpose: With the demand of SPECT/CT increasing, the interest in complex diagnostic information of CT is rising along with the expansion of various studies on potential performance value. But the study on reduction of exposure dose generated by CT is not being conducted enough. Therefore, in this study, the goal is to identify how much dose reduction exists when performing the extremity bone SPECT/CT using the flat-panel CT. Materials and Methods: The extremity bone SPECT/CT was performed with two equipments -BrightView XCT (Philips Healthcare, Cleveland, USA) and Brilliance 16 CT (Philips Healthcare, Cleveland, USA)-to identify the exposed dose and image quality resulted by changing scan parameter (mAs) applying for both equipment respectively. The noise value of image and spatial resolution were measured with AAPM CT phantom. Tube voltage (kVp) was fixed to 120 kVp, tube current (mAs) calculated at different mA (20, 30, 40, 50, 60, 70, 80) was applied to both equipments respectively. DLP (dose length product) were calculated at the same distance at respective mAs. Also, we acquired images and % contrast with NEMA IEC body phantom to confirm the effect on image. The output of statistics was analyzed by SPSS ver.18. Results: Regarding AAPM phantom, the noise decreased as the tube current (mAs) increased and flat-panel had less noise than Helical CT. This difference increased at lower dose exposure. As to the evaluation of spatial resolution, we can differentiate the space up to 0.75 mm with both equipments. With scan parameter (mA) growing, the value of DLP increased up to 54-216 mGy cm at flat-panel CT and up to 177-709 mGy cm at Helical CT. Regarding NEMA IEC body phantom, same sphere with varied parameter (mA) shows that similar results. Conclusion: There is no significant differences of image quality in both flat-panel and Helical CT when the scan parameter (mA) is changed respectively. Moreover, we can identify the reduction of exposure dose and confirm %contrast analysis value with maintaining image quality. Therefore, at the extremity bone SPECT/CT requiring high spital resolution without the wide ROI, the flat-panel CT is considered to be more useful and it expected to result in the similar image quality with lower exposure dose compared to Helical CT. Additionally, through this study, we expect to help the reduction of the unnecessary exposure dose.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.363-372
• /
• 2008

This study was conducted to investigate the relationship between the socio-demographic factors and the Korean consumers' palatability evaluation and to collect the sensory information for development of prediction palatability model of Hanwoo beef. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangji (brisket)] were separated from 5 Hanwoo steer beef (28-30 months old) and prepared with the same manner for 3 different cooking methods such as boiling, grilling, and roasting. The cooked beef samples were served to 650 consumers recruited from Seoul, Joongbu, Honam and Youngnam locations and evaluated as tenderness, juiciness, flavor, and overall acceptability. The consumer living location, age, gender, occupation, monthly income, and cut were significantly related with the scores of sensory properties when steer beef were cooked as boiling cooking (p<0.05). The eating habit and aging of beef were also significantly related with the tenderness and overall acceptability scores (p<0.01) when beef were cooked as boiled. In grill cooking, living location, aging, and cut had the significant effect on the sensory properties of Hanwoo steer beef (p<0.01). When steer beef were prepared by Korean traditional roast cooking, consumer's sensory scores were significantly different by the living location, age, occupation, monthly income, eating habit of consumers, aging and beef cut (p<0.001). Also, results from the principal component analysis showed that palatability scores of Korean consumers were decided with different contribution rate of tenderness, juiciness, flavor and overall acceptability for beef cut depending on cooking methods. In conclusion, Korean consumers' palatability for Hanwoo steer beef were related to the socio-demographic factors and the sensory scores were different by cut and cooking methods.

• 모자간호학회지
• /
• v.2 no.1
• /
• pp.21-33
• /
• 1992

This study was done to investigate how importantly midwives thought of Lamaze Method of Childbirth, how satisfactorily they performed their Lamaze Method of Childbirth and what inhibited their activities from being performed if not done satisfactorily. The subjects of this study were 76midwives at midwifery in Pusan, Deagu, Kyungnam and Kyungbok. Data were collected by using questionaire from Sep. 1 to Sep.30, 1991. The measurement tools was maded by the researcher based on Kim's scale for prenatal nursing activities. The statistical analysis was done with based statistical values likes frequencies, means, standard deviations and advanced methods such as Pearson's correlation coefficient, 1-test, F-test, F-test by using SPSS package program. The results of this study can be summarized as follows ; 1. The results of Investigating perception according to importance degree and performance degree of Lamaze Method of Childbring showed that midwives were slightly below both perception according to importance(2.17) and performance(2.16) of Lamaze Method of Childbirth 2. Inhibiting factors of Lamaze Method of Childbirth were abscence of husband(3.08), lack of teaching room(2.71), and lack of books or literature of Lamaze Method (2.58). 3. There appears to be a positive relation between perception according to importance degree and performance degree of Lamaze Method of Childbirth (r=0.69, P<0.01). There appears to be a negative relation between perception according to importance degree and inhibit factors of performance (r=-0.38, P<0.01). There appears to be a negative relation between performance and inhibit factors of performance (r=-0.22. P<0.01). 4. The item of highest perception defree in prenatal education is 1st, Consultation about sexual life (2.53), End, illustration of the importance of a bath and perinal cleanliness and Avoidance of excessive respiration method and also its comfortable application during uterine contractility(2.45). The item of lowest perception degree is about pregnant symptom sign and predicted date of birth (E.D.C.). On the other hand, The item of highest performance degree is education about nurtrition during pregnacy. 2nd, Illustration of the Importance of a bath and perineal cleanness(2.45). The lowest one is leaching the pregnant woman and her family about the role of husband and her family and also teaching the couple to learn exercise and respiration method (1.84). Though importance perception degree and performance degree is low. Midwives who wert subject in this research shoves that they perform general items concerning prenatal education well. 5. In the relationship between perception according to importance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in mean number of visiting pregnacies for 1 month. 6. In the relationship between performance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in age, marriage, and mean number of visiting pregnancies for 1 month. With the above information we see the importance of midwife prenatal care education and high correlation between performance degree and perception degree. When Lamaze prenatal education is well performed the number of pregnant woman who have follow-up, check-ups increase. Therefore in this research we can validity that there is a relation between Lamaze prenatal education and patient follow-up. This research showes in a situation where if one does not maximally perform a prenatal education there is a possibility that the popular use of midwife activities may encounter obstacles so the education to save new knowledge and training for prenatal education is needed as a function of Lamaze prenatal education, when a special Lamaze education is well performed for the pregnant woman, who follows-up at amidwife clinic. With the above conclusion we can suggest : 1. Continued research which minimized obstacles to Lamaze prenatal education is needed. 2. The official method of midwives is necessary.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.41-54
• /
• 2002

In this study, we have analyzed the effects of the membrane layer and the bragg reflector layers on the resonance characteristics through comparing the characteristics of the membrane type FBAR (Film Bulk Acoustic Wave Resonator) and the one type bragg reflector layers with those of the ideal FBAR with top and bottom electrode contacting air by using equivalent circuit technique. It is assumed that ZnO is used for piezoelectric film, $SiO_2$ are used for membrane layer and low acoustic impedance layer, W are used for the high acoustic reflector layer and Al is used for the electrode. Each layer is considered to have a acoustic propagation loss. ABCD parameters are picked out and input impedance is calculated by converting 1-port equivalent circuit to simplified equivalent circuit that ABCD parameters are picked out possible. From the variation of resonance frequency due to the change of thickness of electrode layers, reflector layers and membrane layer it is confirmed that membrane layer and the reflector layer just under the electrode have the greatest effect on the variation of resonance frequency. From the variation of resonance properties, K and electrical Q with the number of layers, K is not much affected by the number of layers but electrical Q increases with the number of layers when the number of layers is less than seven. The electrical Q is saturated when the number of layers is large than six. The electrical Q is dependent of mechanical Q of reflector layers and membrane layer. Both ladder filter and SCF (Stacked Crystal Filters) show higher insertion loss and out-of-band rejection with the increase of the number of resonators. The insertion loss decreases with the increase of the number of reflector layers but the bandwidth is not much affected by the number of reflector layers. Ladder Filter and SCF with membrane layer show the spurious response due to spurious resonance properties. Ladder filter shows better skirt-selectivity characteristics in bandwidth but SCF shows better characteristics in insertion loss.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.312-321
• /
• 2003

In this paper, we implement robot which are ability to recognize obstacles and moving automatically to destination. we present two results in this paper; hardware implementation of image processing board and software implementation of visual feedback algorithm for a self-controlled robot. In the first part, the mobile robot depends on commands from a control board which is doing image processing part. We have studied the self controlled mobile robot system equipped with a CCD camera for a long time. This robot system consists of a image processing board implemented with DSPs, a stepping motor, a CCD camera. We will propose an algorithm in which commands are delivered for the robot to move in the planned path. The distance that the robot is supposed to move is calculated on the basis of the absolute coordinate and the coordinate of the target spot. And the image signal acquired by the CCD camera mounted on the robot is captured at every sampling time in order for the robot to automatically avoid the obstacle and finally to reach the destination. The image processing board consists of DSP (TMS320VC33), ADV611, SAA7111, ADV7l76A, CPLD(EPM7256ATC144), and SRAM memories. In the second part, the visual feedback control has two types of vision algorithms: obstacle avoidance and path planning. The first algorithm is cell, part of the image divided by blob analysis. We will do image preprocessing to improve the input image. This image preprocessing consists of filtering, edge detection, NOR converting, and threshold-ing. This major image processing includes labeling, segmentation, and pixel density calculation. In the second algorithm, after an image frame went through preprocessing (edge detection, converting, thresholding), the histogram is measured vertically (the y-axis direction). Then, the binary histogram of the image shows waveforms with only black and white variations. Here we use the fact that since obstacles appear as sectional diagrams as if they were walls, there is no variation in the histogram. The intensities of the line histogram are measured as vertically at intervals of 20 pixels. So, we can find uniform and nonuniform regions of the waveforms and define the period of uniform waveforms as an obstacle region. We can see that the algorithm is very useful for the robot to move avoiding obstacles.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.1
• /
• pp.93-102
• /
• 2004

Recently, the golden age of herbal cosmetics has come. Along with active introduction of oriental herbal lines, diversification of distribution channels is designated as a major feature. In this background, the present study attempts to consider the domestic market for oriental herbal cosmetics, which is growing rapidly with the introduction of various new brands, and examine the perceptions of this new type of cosmetics by women consumers based on their purchase behaviors, and search for the ways for its promotion and development. A survey was conducted to adult women consumers aged 19∼60 residing in Seoul or Gyeonggi-do. Out of a total of 430 surveys distributed, 350 answer sheets were used for the analysis Among the results, the first-hand information on the herbal cosmetics market, their usage, and the consumer needs obtained in the present study will serve as a fundamental data for planning the marketing strategies for the oriental herbal cosmetics.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.317-324
• /
• 2020

In order to create the national food nutrient database, a total of 41 animal foods (ham, seafood, edible insects and eggs) were analyzed for their vitamin B₁₂ content and the applied immunoaffinity-HPLC was verified. Ham vitamin B₁₂ contents were 0.30-0.65 ㎍/100 g. Seafood showed relatively high vitamin B₁₂ level, where the values of fermented clam were the highest (26.80 ㎍/100 g) followed by fermented pollack roe. Vitamin B₁₂ was not detected in silkworm pupae and beetles, while relatively high levels were found in the two-spotted cricket imago (6.70 ㎍/100 g). Chicken and quail egg yolk had roughly 100- and 30-times higher vitamin B₁₂ levels as compared to their egg white. Vitamin B₁₂ contents in quail and chicken eggs were significantly enhanced by boiling (p<0.05). Results based on accuracy (97-102% recovery) and precision (<5% RSD) indicate that this study provides reliable vitamin B₁₂ information on animal foods consumed in Korea.