• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1348-1353
• /
• 2006

This paper is concerned with the comparison of component mode synthesis md substructure synthesis methods. Those two methods were developed for the dynamic analysis of complex structure. However, the difference between two methods in solving the dynamic problem has never been explained. In this paper, a structure consisting of two beams is considered for the application of two methods. The dynamic formulation shows the characteristics and differences of two methods. The procedure for choosing proper substructure modes in each method is explained in detail. In addition, the advantage of the substructure synthesis method is discussed based on the numerical example. Numerical examples show how two methods are applied to the addressed problem.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.339-343
• /
• 1998

Sinusoidal model 은 음성신호처리의 넓은 분야에 적용되고 있는 방법으로 고음질의 합성음을 생성해 낼 수 있고, 조작이 용이하다는 장점을 가지고 있다. 본 논문에서는 Analysis-by-synthesis/Overlap-add Sinusoidal model 이라는 방법을 이용하여 시간축 변환과 dam성 변환을 수행하였다. 특히 본 논문에서는 음질향상을 위하여 시간축 변환시에는 정적인 구간과 변화하는 구간을 구별하여 서로 다른 시간축 변환비를 이용하였고, 기존의 LPC 방법에 비해 스펙트럼 포락선을 보다 잘 추정하는 Improved Cepstrum을 이용하여 음정변환에 적용하였다. 또 서로 다른 문맥에서 얻어진 음성단위들을 결합할 때 생기는 위상차이를 극복하기 위하여, 기본주파수 성분이 일치하도록 시간축을 이동하여 합성하였다. 실험결과 본 논문에서 적용한 방법들을 통해 기존 방식에 비해 개선된 음질을 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.1
• /
• pp.82-87
• /
• 2000

The component mode synthesis method(CMS) used for vibration analysis has demerit that error becomes larger, as degree of natural frequency grows higher. The reason of error occurrence is that Guyan's static reduction is used and the number of modes taken in each component is deficient. This paper proposes the substructure synthesis method using dynamic reduction to solve the problem from the component mode synthesis method. Computer simulation for the proposed method. FEM and the component mode synthesis method(CMS) on a rectrangular plate has been carried out to prove the avilability of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.77-82
• /
• 1999

A sinusoidal model has been widely used in the analysis and synthesis of speech and audio signals, and becomes one of the efficient candidates for high quality low bit rate audio coders. One of the crucial steps in the analysis and synthesis using a sinusoidal model is the detection of tonal components. This paper proposes an efficient method for the analysis and synthesis of audio signals using a sinusoidal model, which uses psychoacoustic criteria such as masking effect, masking index, and JNDf(Just Noticeable Difference in Frequency). Simulation results show that the proposed method reduces the number of sinusoids significantly without degrading the quality of the synthesized audio signals.

• Journal of Multimedia Information System
• /
• v.2 no.3
• /
• pp.263-274
• /
• 2015

The subject of this work is the complex discrete systems simulation special features with the aid of dynamic graph models. The proposed simulation technique allows to determine the ways for tasks solutions in terms of discrete systems analysis and synthesis of various complication: one-dimensional and multidimensional, steady and unstable, with the pulse elements abnormal operating mode and others. Often complex control systems analysis and synthesis task solutions, via classical approach comes out to be insolvent, because of the computational problems. The application of graph models allows to perform clear and strict characterization and computer procedures automation. The optimal controls synthesis algorithm presented in this paper, transferring the discrete system from target initial state to target final state within the minimum time, allows to consider the zero initial conditions systems, with the initial potential energy, with the control actions limitations and complex pulse elements operating mode.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.503-514
• /
• 1995

In the case of performing experimental modal analysis(EMA) and finite- element analysis(EFA) for a whole structure of automotive body that is composed of many complex parts, a trouble may arise from the calculation time, the capacity of memory in computers and the experimental conditions, etc. In this paper, for the vibrational analysis of automotive body model, the efficient modal synthesis method by means of dividing the whole structure into two parts and performing EMA and FEA for each part is studied. In addition, the method based on Lagrange interpolation is proposed for approximating rotational degrees-of-freedom information and linking FEA with EMA. In result, by measuring translational degrees-of-freedom information of only few points and adopting only few modes, the linking method based on Lagrange interpolation turned out to be efficient and accurate in the low frequency range.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.324-330
• /
• 1990

In this study, in order to perform dynamic design of machine tools reasonably and effectively, a method was formulated to be applicable to the damped structures connected by joints having elasticity and damping by using substructure synthesis method. And a nonlinear solution method was proposed and it formulates the nonlinear parts by describing functions and uses the reducing transformation matrix by the substructure synthesis method. The results of frequency response analysis of a machine tool, where an NC lathe was partitioned by three parts of spindle, housing and bed-base part and the nonlinearity of bearing parts between spindle and housing was modelled, showed force dependency of the response.

• Perspectives in Nursing Science
• /
• v.8 no.1
• /
• pp.10-19
• /
• 2011

Purpose: This article was proposed to describe and summarize the following 1) the structural hierarchy of nursing knowledge and 2) the four different methods of concept analysis and concept development, which are used most frequently in nursing literature, and 3) to demonstrate a qualitative data synthesis of situation-specific theories in Korea in order to provide an venue for developing Korean-contextualized nursing theory. Methods: A literature review and a meta-synthesis were used. An interpretive integration method for the meta-synthesis was used to incorporate incorporating the results of ten qualitative studies in Korea. Results: The normative and extended concept of the self was one of the three foremost concepts. The experiences of being detached from a group and of being unlike others were perceived with distress to Korean participants. Lastly, as a coping method, complying with a higher flow or power was used. Conclusion: Based on the three concepts elicited in this article, a substantive theory which withholds Korean nursing concepts and essences is hoped to be developed in future.

• Clean Technology
• /
• v.6 no.2
• /
• pp.129-137
• /
• 2000

A methanol synthesis process via reverse-water-gas-shift and methanol formation reactions has been analyzed using the notion of exergy. The analysis has been based on the simulation results with the aid of real operating data. Driving and material exergy losses have been defined and quantified, respectively. Locations and the reason of major exergy losses have been pinpointed and improvement strategies have been suggested. It had been noted that the exergy analysis can provide a sound scientific base for adopting the concept of industrial ecology and developing loss prevention schemes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.82-89
• /
• 1996

In this study, to choose the drilling m/c with analysis model for dynamic design of machine tool strctures, are used substucture syntheis method for reduction to degrees of freedom of dynamic model and analysis evaluation of substructures The dynamic factors of substurctures are examined by substructure synthesis method. And that dynamic design of structures for energy balancing are performed. The computer program for calculated of the dynamic and energy distribution analysis was developed. Result of numerical analysis by developed program obtained to conclusion as following. The design of machine tool structures by dynamic avoid the resonances, and are known to considered based on the energy balancing. These methods can be used effectively for the performance evaluation, design modification and improvement of dynamic performance evaluation, design modification and improvement of dynamic performance of machine tools.