• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.26-33
• /
• 2001

This paper compares conventional beam analyses with exact three dimensional plate analyses through numerical examples with plates under wind loads in order to study the disadvantages of conventional simplified beam analyses of wind-loaded structures, Bending moments and principal stresses from beam analyses are good agreements with those from plate analyses but torsional moments are not. And it is possible to get result forces which are variant along width directions from plate analyses but not from beam analyses due to constant distributions of result forces along width directions. Therefore exact three dimensional plate analyses are required in the analyses of wind-loaded structures instead of conventional simplified beam analyses.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.477-484
• /
• 2000

Earthquake response analyses are conducted for the investigation of the ground shaking during the 1995 Hyogoken-nambu earthquake. Port Island a man made island with about 8{{{{ KAPPA m^2 }} area is chosen for this purpose Because earthquake measurement with vertical array was conducted there. Strain dependent characteristics of soil can be modeled well into Hardin-Drnevich Model. Four analyses are conducted : total stress analysis by equivalent linear method non-linear method. and two effective stress analyses. All analyses except equivalent linear analysis show fairy good agreement with observed record mainly because the non-linear behavior of Holocene clay layer has predominant effect on the behavior of fill, However detailed investigation show that effective stress analyses give much better prediction than total stress analyses.

• Structural Engineering and Mechanics
• /
• v.69 no.3
• /
• pp.293-306
• /
• 2019

In current seismic design codes, various elastic design acceleration spectra are defined considering different seismological and soil characteristics and are widely used tool for calculation of seismic loads acting on structures. Response spectrum analyses directly use the elastic design acceleration spectra whereas time history analyses use acceleration records of earthquakes whose acceleration spectra fit the design spectra of seismic codes. Due to the fact that obtaining coherent structural response quantities with the seismic design code considerations is a desired circumstance in dynamic analyses, the response spectra of earthquake records used in time history analyses had better fit to the design acceleration spectra of seismic codes. This paper evaluates structural response distributions of multi-story reinforced concrete frames obtained from nonlinear time history analyses which are performed by using the scaled earthquake records compatible with various elastic design spectra. Time domain scaling procedure is used while processing the response spectrum of real accelerograms to fit the design acceleration spectra. The elastic acceleration design spectra of Turkish Seismic Design Code 2007, Uniform Building Code 1997 and Eurocode 8 are considered as target spectra in the scaling procedure. Soil classes in different seismic codes are appropriately matched up with each other according to $V_{S30}$ values. The maximum roof displacements and the total base shears of considered frame structures are determined from nonlinear time history analyses using the scaled earthquake records and the results are presented by graphs and tables. Coherent structural response quantities reflecting the influence of elastic design spectra of various seismic codes are obtained.

• Journal of Korean Society for Quality Management
• /
• v.27 no.4
• /
• pp.42-66
• /
• 1999

We proposed eight dimensions and their constituents of product advantage in the last issue. In this study, using the dimensions and constituents, gap analyses are conducted on some product categories(; desktop computer, PCS terminal, and washing machine) in order to know what dimensions or constituents are major areas to be improved. For the purpose of strategic use of the dimensions of product advantage, Kano analyses are also applied. Based on the results of the gap analyses and Kano analyses, the future directions of new products development for the selected products are suggested.

• The Korean Journal of Malacology
• /
• v.9 no.2
• /
• pp.44-56
• /
• 1993

These studies were conducted to compare the external morphologies of 15 species of land snails in 8 genera of family Bradybaenidae in Korea. Principal component analyses of 15 species can be divided into five groups based on the morphological characters and the result of cluster analyses were in accord with the principal component analyses. The morphological intraspecific similarity of Nesiohelix samarangae of Mitan and Cheju population(S=0.999) proved to be highest. The degree of interspecific similarity between Aegista(Plectotropis)divesa and Aegista(plectotropis)quelpartensis(S=0.970)were more similar than the other interspecies.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.373-380
• /
• 1998

3D finite element analyses of movable bearing shoe and hinged bearing shoe are performed. The finite element models are built using MSC/PATRAN and analyses are carried out using MSC/NASTRAN. Results are again completely processed using MSC/PATRAN. From the results of the analyses, trends of deformation and stress distribution are reviewed and important factors to consider in the design of bearing shoes are discussed. Furthermore optimum crowning amount for the roller of movable bearing shoe was determined according to the results of the analyses.

• Earthquakes and Structures
• /
• v.4 no.1
• /
• pp.41-62
• /
• 2013

A comprehensive experimental program of cyclic tests on 1:3-scale models of bridge piers is going to be carried out at the Laboratory of Structures and Materials of the University of Basilicata. The testing models include eight RC single shaft piers with hollow circular cross section. Four piers have been realised using corroded steel rebars. In this paper, the results of preliminary numerical simulation analyses of the cyclic behaviour of the piers, carried out with Opensees using fiber-based models, are presented. Pull-out and lap-splice effects of steel rebars have been taken into account in the numerical analyses. First, the experimental specimens and the test set up are presented. Next, the results of the numerical analyses are discussed. In the numerical analyses, different configurations and levels of corrosion have been considered. The effective stiffness and equivalent damping of the piers is reported as a function of pier ductility and pier drift.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.389-393
• /
• 2016

Job hazard analyses were conducted to assess exposure to musculoskeletal disorder (MSD) risk factors in seven workers of three dry-cleaning establishments. In accordance with the Washington State Ergonomics Rule, the analyses were performed in two separate steps: (1) observation and checklist approaches were made to identify a "caution zone job" in the seven workers' pressing operations across the three shops; and (2) detailed posture and motion analyses were undertaken to determine a "MSD hazard" in one worker's operation using a video technique. One "caution zone job" was identified and it was the pressing operation job in which five physical risk factors were found in the pressing operations. The detailed analyses confirmed that one "MSD hazard", i.e., awkward posture in shoulders, was prevalent in the pressing operations of the three dry-cleaning facilities. It would be desirable to reduce MSD risk factors including awkward shoulder posture in the dry-cleaning industry.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.180-186
• /
• 2006

In this study, a large-scale laboratory model test, 2-D and 3-D numerical analyses were conducted to verify the reinforcement effect by utilizing geotextile bag on the railway roadbed. Static loading which simulated train load was applied on the geotextile bag-reinforced railway roadbed and also unreinforced railway roadbed, Computer program named Pentagon which is a part of FEM programs was used in the numerical analysis. Based on the results of laboratory test, 2-D and 3-D numerical analyses, the effect of load distribution and settlement reduction was found to be depending on the geotextile characteristics, tensile strength of geotextite, and interface friction angle between geotextile bags. In general, the result of 2-D and 3-D numerical analyses shows lower value than that of laboratory test. Also, the result of 3-D numerical analyses shows lower value than that of 2-D numerical analyses because of its stress transfer effect.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.104-111
• /
• 1998

Statistical analyses of occupational accidents associated with construction work were carried out to explore the basic statistical characteristics of their damage consequences. Emphasis was placed upon the probabilistic and statistical analyses to clarify, in particular, the relationship between frequency of labour accidents and their damage consequences. Damage consequences were classified into two categories such as the number of workdays lost due to accidents and the number of injured workers involved in one accident. Two types of accident data were collected for the analyses. From the analyses, it was found that the relation between damage due to accidents and their frequencies can be represented by a simple power function which indicates a log-log linear relation. By making use of this relationship, various probabilistic evaluations such as the estimation of the mean time periods between accidents, expected damage consequences, and expected damage ratio between different mean time period of accidents were conducted.