• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2002

Since the high performance analog-to-digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Sng1e Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.330-332
• /
• 2006

A short distance laser range detector was developed on digital circuit. The circuit changed the analog circuit to digital circuit as possible as. The currently available laser range circuit one uses analog circuit mainly. But this ranger design targeted mass production with digital reporting function. So digital circuits replaced the analog circuit except amplifier and remained minor circuits those are hard to replace with digital circuit. The simulation shows that it is possible to make a reasonable distance measuring circuit on a digital circuit for very low price compare to analog circuit one.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.49-54
• /
• 2005

This paper presents a design of 1-channel active dry electrode module for EEG from one's forehead. The IA(instrumentation amplifier) circuit inside the module is based on the configuration sown on the paper MettingVanRijn et al. We analyze the IA circuit to find out the related equation, and then compare its simulated characteristic with the result obtained from the real active dry electrode circuit. With the active dry electrode and the wet(Ag/AgCI) electrode connected to the separated analog processing module on one's forehead at the same time, their real time and FFT outputs of EEG are examined for comparison. The active dry electrode module has advantages over the wet electrode and its analog processing module: 1) The size of the analog processing circuit of the active dry electrode module is smaller than that of existing EEG analog processing module; 2) the total cost required to make the proposed analog processing circuit is much lower than that of the existing circuit, since the designed circuit needs smaller parts; 3) the electrical characteristic is comparable to the general EEG analog processing module even if the designed module has simpler circuit configuration.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2485-2492
• /
• 2018

The rapid development of large-scale integrated circuits has brought great challenges to the circuit testing and diagnosis, and due to the lack of exact fault models, inaccurate analog components tolerance, and some nonlinear factors, the analog circuit fault diagnosis is still regarded as an extremely difficult problem. To cope with the problem that it's difficult to extract fault features effectively from masses of original data of the nonlinear continuous analog circuit output signal, a novel approach of feature extraction and dimension reduction for analog circuit fault diagnosis based on wavelet packet decomposition, local linear embedding algorithm, and clone selection algorithm (WPD-LLE-CSA) is proposed. The proposed method can identify faulty components in complicated analog circuits with a high accuracy above 99%. Compared with the existing feature extraction methods, the proposed method can significantly reduce the quantity of features with less time spent under the premise of maintaining a high level of diagnosing rate, and also the ratio of dimensionality reduction was discussed. Several groups of experiments are conducted to demonstrate the efficiency of the proposed method.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.238-241
• /
• 1999

Analog-to-digital converter has attracted a lot of interests as one of the most prospective area of an application of Josephson Junction technology. Recently, the development of a digital-to-analog converter has been pursued to achieved the high performance. One of the main advantage in using single flux quantum logic in a digital-to-analog converter is the low voltage drop in a single Josephson Junction and hence the resolution of the output voltage of this digital-to-analog converter can be very high. In this work, we have used a software, called WRspice, to study a voltage multiplier circuit which is the basic block in building a digital-to-analog circuit. In simulation, we operated a voltage multiplier with .4 Josephson Junctions per stage and studied the dependence on the circuit bias currents and the circuit inductors of the voltage multiplier. Our simulation results showed a fast operation and reasonable circuit margins.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.837-848
• /
• 2022

Analog circuit design is comparatively more complex than its digital counterpart due to its nonlinearity and low level of abstraction. This study proposes a novel low-level hybrid of the sine-cosine algorithm (SCA) and modified grey-wolf optimization (mGWO) algorithm for machine learning-based design automation of CMOS analog circuits using an all-CMOS voltage reference circuit in 40-nm standard process. The optimization algorithm's efficiency is further tested using classical functions, showing that it outperforms other competing algorithms. The objective of the optimization is to minimize the variation and power usage, while satisfying all the design limitations. Through the interchange of scripts for information exchange between two environments, the SCA-mGWO algorithm is implemented and simultaneously simulated. The results show the robustness of analog circuit design generated using the SCA-mGWO algorithm, over various corners, resulting in a percentage variation of 0.85%. Monte Carlo analysis is also performed on the presented analog circuit for output voltage and percentage variation resulting in significantly low mean and standard deviation.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.375-377
• /
• 2006

A Analog parallel processing-based Viterbi decoder which decodes PRML signal of DVD has been designed by CMOS circuit. The analog processing-based Viterbi decoder implements are functions of the conventional digital Viterbi decoder utilizing the analog parallel processing circuit technology. The Analog parallel processing-based Viterbi decoding technology is applied for the PR(1,2,2,1) signal decoding of DVD. The benefits are low power consumption and less silicon consumption. In this paper, the comparison of the Analog parallel processing-based Viterbi Decoder which has a function of the error correction between Max operation and Average operation is discussed.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.560-564
• /
• 2004

An analog front-end circuit for ISO/IEC 14443-compatible radio frequency identification (RFID) interrogators was designed and fabricated by using a $0.25{\mu}m$ double-poly CMOS process. The fabricated chip was operated using a 3.3 Volt single-voltage supply. The results of this work could be provided as reusable IPs in the form of hard or firm IPs for designing single-chip ISO/IEC 14443-compatible RFID interrogators.