• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.105-111
• /
• 2000

광트랜스버셜 필터를 이용하여 희망하는 특성을 실현하기 위해서는 주어진 전달함수의 차수 만큼의 광섬유 증폭기를 사용하여야 한다. 본 논문에서는 단지 한 개의 광섬유 증폭기를 이용하여 주어진 전달함수의 정수 배를 실현할 수 있는 광트랜스버셜 필터에 대하여 논한다. 이때 광신호 에너지를 유효하게 사용하기 위하여 광신호 에너지를 최소로 하는 설계법을 적용하였다. 그리고 제안한 광트랜스버셜 필터를 이용한 몇 가지의 응용에 대하여 논하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.263-264
• /
• 2006

A new method for the electrostatic suspension of disk-shaped objects is proposed which is based on a time-optimal control scheme and deploys only high-voltage power supplies that can deliver do voltages of positive and/or negative polarity. This method possesses the unique feature that no high-voltage amplifiers are needed which leads to a remarkable system simplification and objects can be suspended stably even in vacuum environment. Using this scheme, an Aluminium disk employed in a 3.5-inch HDD was suspended stably at an airgap of 0.3mm.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.66-68
• /
• 2008

본 논문은 CPW 발룬을 이용한 평형증폭기 설계에 대하여 기술한다. 종래의 평형증폭기에서 널리 사용되는 윌킨슨 전력분배기, 브랜치 라인 하이브리드 커플러에 이어 발룬도 평형증폭기를 구성하는데 사용될 수 있음을 보인다. 이로부터 발룬을 이용해서도 평형증폭기의 반사손실 대역폭을 향상시킬 수 있음을 보인다. CPW 발룬 및 단일증폭기를 사전에 제작하여 특성을 측정했으며, 이를 이용하여 평형증폭기를 설계하였다. 측정결과 제안한 CPW 평형증폭기의 특성이 단일증폭기에 비하여 대역폭 등에서 매우 유리했으며, 특히 종래의 브랜치 라인 하이브리드를 이용한 발룬보다 동작 대역폭 특성이 더 우수하였다.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.56-64
• /
• 2005

A simple and cost-effective method for the electrostatic suspension of thin plates like silicon wafers is proposed which is based on a switched voltage control scheme. It operates according to a relay feedback control and deploys only a single high-voltage power supply that can deliver a DC voltage of positive and/or negative polarity. This method possesses the unique feature that no high-voltage amplifiers are needed which leads to a remarkable system simplification relative to conventional methods. It is shown that despite the inherent limit cycle property of the relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping origination from the air between the electrodes and levitated object. Using this scheme, a 4-inch silicon wafer was levitated stably with airgap variation decreasing down to $1 {\mu}m$ at an airgap of $100{\mu}m$.

• Journal of Biosystems Engineering
• /
• 제13권2호
• /
• pp.9-17
• /
• 1988

This study was carried out to develop an agricultural robot for fruit harvesting. As the first step an experimental manipulator and its control system were constructed. The articulated manipulator driven by DC motors has 3 degrees-of-freedom. The manipulator has a gripper adequate for fruit harvesting and an upper arm which forms a kind of guiding channel so thai harvested fruit can pass through. Point-to-point control of joints are accomplished by a digital control system with a PID controller which consists of optical shaft encoders, power amplifiers using PWM, a microcomputer and a software. The microcomputer also computes the positions of manipulator and sequence of motions. The motion of the manipulator was to slow and rough that it would need further improvement.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.9-17
• /
• 1991

A dynamometer was designed and constructed to measure three directional forces and moments of pull type implement with eliminating the interference between the forces. The dynamometer consists of a linear motion bearing, self-aligning bearings, universal joints, and cantilevers where strain gages were attached. A data acuquisition system was developed to collect data and to analyze them. The data acuquisition system consists of the dynamometer, a potentiometer to measure the implement depth, strain amplifiers, a A/D converter, and an IBM-AT compatible microcomputer. Program, written in C language, was developed to read data from tranducers with given interval, to calculate forces and moments, to display them on screen, and to store them on disk. The calibration results showed that cantilevers had good linearity and there was no interference among directional forces. When applied loads were reduced with constant rate, hysteresis was appeared on the dynamometer. It might to be reduced by using ball bearings instead of self-aligning bearings.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.146-154
• /
• 1989

비대칭2선 마이크로스트립선으로 구성된 DC블록(비대칭 DC블록)을 GaAs FET의 입력과 출력측에 사용하여 임피던스 정합을 시키는 새로운 증폭기 설계방법을 제시하였다. 중심파수 4(GHz)에 대하여 대칭이 되는 주파수특성을 얻을 수 있었다. 비대칭 DC블록은 \ulcorner케패시터의 DC블록의 역할뿐만 아니라 임피던스 정합도 할 수 있다는 큰 장점으로 MC 및 MMIC 용으로 사용 가능하다.

• 한국전자파학회논문지
• /
• 제11권4호
• /
• pp.575-581
• /
• 2000

본 논문에서는 Vector Sum 방법을 이용한 새로운 구조의 능동 위상천이기를 제안하였고 그 위상천이기를 제 어할 독특한 디지털 방식의 위상 제어 방법을 제시하였다. 제안한 새로운 구조의 능동 위상천이기는 Wilkinson power combiner/divider, branch line 3 dB quadrature hybrid coupler, 그리고 dual gate FET(DGFET)를 사용 한 가변 이득 증폭기(VGA)를 이용하여 설계.제작하였다. 그리고 제작된 능동 위상천이기를 디지털 방식으로 동작시킴으로써 제안된 구조가 효율적으로 잘 동작하고 또한 제시된 디지혈 방식으로 제어하는 방법이 타당함을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.52-56
• /
• 2016

This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.76-81
• /
• 2015

This paper presents a design of a transmission line negative group delay (NGD) circuit with multiple pole characteristics. By inserting an additional transmission line into a conventional NGD circuit, the proposed circuit provides further design parameters to obtain wideband group delay (GD) and to help reduce signal attenuation. As a result, the number of gain compensating amplifiers can be reduced, which can contribute to stable operation when integrated into RF systems. The multiple pole characteristics can provide wider NGD bandwidth and can be obtained by connecting resonators with slightly different center frequencies separated by quarter-wavelength transmission lines. For experimental validation, an NGD circuit with two poles GD characteristic is designed, simulated, and measured.