• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.545-553
• /
• 2012

This paper reports the development of an automatic system for mixing offset printing ink. The ink mixing process is important in industrial fields where paint and ink are used. In particular, there is a demand for automating the process of producing spot colors, which involves mixing a small quantity of high-viscosity ink. The authors designed, fabricated, and experimentally tested an automatic mixing system that employs the revolution and rotation of ink and the transmission by belts. The performance of the ink mixing system was verified by conducting numerous experiments to determine the effect of rotation direction, speed, ink container axis angle, and ink amount. Conditions suitable for mixing offset ink are presented for use as guidelines for producing spot colors.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.2
• /
• pp.13-24
• /
• 1999

Electronic cash is a digital signature issued by bank. If the concept of the distributed secret sharing and magic ink signature is introduced in the existing electronic cash system we can increase the security level and the availability of electronic cash system and trace the electronic cash itself and the owner of electronic cash which was issued anonymously to a user in case of illegal usage of electronic cash by users. If the trust is concentrated on one bank system. the problem of misuse of bank can be occurred. To solve this problem, the distributed secrete sharing scheme need to be introduced in electronic cash system. In this paper We propose a DSS(Digital Signature Standard) distributed magic ink signature scheme and a KCDSA(Korea Certificate-based Digital Signature Algorithm) distributed magic ink signature scheme using a verifiable secret sharing method. and we compare two methods with respect to the required computation amount for the generation of magic-ink signature.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.109-120
• /
• 2007

In gravure printing, the amount of ink fill into the cells has a great effect on the qualities of final printed products. And printability of final products is determined by every kinds of variables. Ink transfer process is not verified scientifically because gravure cell is small and printing speed is rapid. In order to understand the ink transfer mechanism of conventional gravure, this study is performed using the Computational Fluid Dynamics Evaluation. Flow-3D simulation software is used for considering of Newtonian flow. Among the various factors, this study have dealt with gravure cell types used computer simulation in order to define distinctive features in ink flow in the cell. The results of simulation, it defined the distribution of pressure, speed, stream function, viscosity, shear rate, surface tension during the gravure printing. It is founded out the difficulties and characteristics according to the printing speed and viscosity of Gravure ink.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.87-96
• /
• 2008

Paper stock could be situated in a cooled environment seasonally and/or regionally otherwise it is stored in a controlled warehouse. In this paper, printing problems on a cooled paper are investigated and characterized in terms of paper properties. For this purpose, various kinds of sample are cooled down under a specially designed freezing device and printed for observing their printability. Causes for poor ink transfer on a cooled paper are suggested due to condensation, surface inactivity, and rheological change in ink film. Paperboards with higher amount of binder, thick and/or multi-coated layers are more vulnerable to poor ink trap. Severe drying of wet coating could cause a similar result as that of the coatings with higher binder formulation. It is shown that more absorptive porous structure is desirable for better ink receptivity in a cooled status. Printing on a dampened surface may be an indicator for ink transferability on a cooled paper. Finally, desirable directions for papermaker and printshop are suggested.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.17-27
• /
• 2006

Paper could be situated in a cooled environment seasonally or regionally otherwise it is forced to be in a controlled circumstance. In this paper, printing problems on a cooled paper are investigated and characterized in terms of paper properties. For this purposes, various kinds of sample are cooled down under a specially designed freezing device and printed for observing their printability. Causes for poor ink transfer on a cooled paper are suggested due to condensation, surface inactivity, and rheological change in ink film. Paperboards with higher amount of binder, thick and/or multi coat layers are more vulnerable to poor ink trap. Severe drying could cause the same effect as that of higher binder formulation. It is shown that more absorptive porous structure is desirable for better ink receptivity in a cooled status. Printing on a dampened surface may be an indicator for ink transferability on a cooled paper. Finally, desirable directions for papermaker and printshop are suggested.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.844-851
• /
• 2021

Due to the increase in consumers' interest about well-being, interest in eco-friendly products has been increasing due to the harmful effects of various harmful substances contained in textile products and environmental issues. As a result, natural dyes of less potential risk than synthetic dyes and digital textile printing(DTP) textile products with less environmental pollution are drawing attention. However, due to the lack of evaluation criteria for DTP textile products with natural ink and the nature of many colors are stacked layer by layer for dying, the need for simultaneous analysis is emerging. To evaluate whether the natural dye is derived from natural ingredients, the biocarbon content is analyzed. However, in the case of ink made using natural dyes and DTP textile products using natural ink, it is difficult to analyze the biocarbon content due to the limitation of the presence of a small amount of dye contained therein. In this study, we were shown the possibility of natural derived verification by cross-checking the analytes of natural dyes (Persicaria tinctoria, an indigo dye; Dactylopius coccus, a light red; and Curcum longa L., i.e., turmeric) and natural ink with HPLC-MS/MS. The coefficient of determination was 0.999 or higher, the limit of quantification was 0.647-3.664 ㎍/L and a %RSD of each indicator material was less than 10. Then, the extraction amount of natural dyes for five patterned fabrics was analyzed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.52-60
• /
• 2009

A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.119-123
• /
• 2011

The application of flexo printed ONP and OCC leads to brightness decrease of deinked stock in ONP recycling system. The largest problems are due to accumulation of flexo ink & introduction of brown fibers. All these are emphasized by variations in the amount of flexo printed ONP and OCC in recovered ONP stock. Most of the brightness problems caused by flexo ink can be helped and solved by applying a proper polyelectrolytes as coagulation agent and flocculation agent. This requires exact evaluation of sedimentation or dissolved air flotation potentials of flexo ink and polyelectrolytes. Effect of bleaching chemical (H2O2) addition level on the increase of brightness of OCC included stock has been investigated by lab scale test.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.7-18
• /
• 2002

The emulsification of lithographic printing inks are very important to determine printing quality. In this study, we measured the variation of water pickup according to the hardness of water in dampening solution. In order to observe the rheorogical properties of the emulsified inks, we measured the viscosity, the elastic return, the thixotropy area and yield stress value of the emulsified inks. In this paper, we found that the water pickup of the ink increase the hardness of water with the amount of dampening solution. Also, The viscosity, the yield stress value and the thixotropy area were increase by the water pickup of the ink.