• 한국자기학회지
• /
• 제9권3호
• /
• pp.154-158
• /
• 1999

Nd 함유량을 2~6at.%로 변화시킨 $\alpha$-(Fe, Co)-B-Nb-Cu 초미세결정립합금의 미세조직 및 자기특성을 조사하였다. 급속응고된 Ndx(Fe0.9Co0.1)90-xB6Nb3Cu1(2$\leq$x$\leq$6, 1at.% 간격) 합금은 x=3 이상에서 비정질상으로 제조되었다. 제조된 비정질합금은 열처리에 의해 $\alpha$-(Fe, Co) 및 Nd2(Fe, Co)14B1상으로 구성된 초미세결정립합금으로 결정화 되었다. 최적열처리조건에서 잔류자화는 Nd의 증가에 따라 감소하며, x=3에서 1.55T로 최대 값을 나타내었다. 보자력은 Nd함유량 증가에 따라 직선적으로 증가하여 x=6에서 4.6kOe이었으며, 최대에너지적은 10.6MGOe였다.

• 한국자기학회지
• /
• 제12권4호
• /
• pp.154-159
• /
• 2002

벌크 비정질 형성능과 큰 포화자속밀도를 가지는 FeBSiNb계 아몰퍼스 합금 리본을 22~102$\mu\textrm{m}$의 두께 범위에서 단롤형 액체 급냉법으로 제조하였다. 이 합금은 두께 증가에 따라 보자력이 감소하고 최대투자율 및 교류투자율이 증가하였으며, 자기이력곡선의 각형비가 감소하였다. 한편 전기 비저항은 두께와 상관없이 거의 일정한 값을 나타내었다. 또 지구 관찰 결과, 두께가 증가하면 내부 자기 이방성의 변화에 따라 자구가 미세화 되고 보다 복잡한 자구 구조를 갖는 것으로 나타났다. 두께 81$\mu\textrm{m}$인 합금의 경우, 24 mOe의 작은 보자력과 1KHz에서 12,000이상의 높은 실효투자율을 나타내어 일반적인 고 연자성 비정질 합금(두께 약 20$\mu\textrm{m}$)의 특성을 능가하였다. 이와 같은 두꺼운 FeBSiNb 비정질 합금의 우수한 연자성은 자벽이동에 대한 표면 고착 효과의 감소 및 수직자기이방성 성분의 출현과 미세화 된 자구 구조에 그 원인이 있는 것으로 평가되었다.

• 전기화학회지
• /
• 제6권4호
• /
• pp.236-241
• /
• 2003

Magnetic CoW thin film alloys were electrodeposited from citrate baths to investigate the resulting microstructure and magnetic properties. Deposit tungsten (W) content in the films electrodeposited at $70^{\circ}C$ were independent of current density, while coercivity decreased from hard $(H_{c,//}\~150\;Oe\;and\;H_{c.{\bot}}\;\~240\;Oe)$ to soft magnetic properties $(H_{c,//}\~20\;Oe\;and\;H_{c.{\bot}}\;\~30\;Oe)$ with increasing current densities from $10\;to\;100mA{\cdot}cm^2$, with deposit W content $(\~40\%)$ relatively unaffected by the applied current density. X-ray diffraction analysis indicated that hcp $Co_3W$ phases [(200), (201) and (220) planes] in the CoW films electrodeposited at $70^{\circ}C\;and\;10mA{\cdot}cm^{-2}$ were dominant, whereas amorphous CoW phases with small amount of hcp $Co_3W$ [(002) planes] were dominant with deposition at $70^{\circ}C\;and\;100mA{\cdot}cm^{-2}$. At intermediate current densities $(25\;and\;50mA{\cdot}cm^{-2}),\;hop\;Co_3W$ phases [(200), (002), (201) and (220)] were observed. The average grain size was measured to be 30 nm from Sheller formula. It is suggested that the change of the deposit coercivities in the CoW thin films electrodeposited at $70^{\circ}C$ is attributed to the change of microstructures with varying the current density. Nanostructured $Co_3W/amorphous-CoW$ multilayers were fabricated by alternating current density between 10 and $100 mA{\cdot}cm^{-2}$, varying the individual layer thickness. The magnetic properties of $Co_3W/amorphous-CoW$ multilayers were strongly dependent on the thickness of the alternating hard and soft magnetic thin films. The nanostructured $Co_3W/amorphous-CoW$ multilayers exhibited a shift from low to high coercivities suggesting a strong coupling effect.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1241-1248
• /
• 2018

The reactive wetting behaviors of molten Zn-Al-Mg alloys on MnO- and amorphous (a-) $SiO_2$-covered steel sheets were investigated by the sessile drop method, as a function of the Al and Mg contents in the alloys. The sessile drop tests were carried out at $460^{\circ}C$ and the variation in the contact angles (${\theta}_c$) of alloys containing 0.2-2.5 wt% Al and 0-3.0 wt% Mg was monitored for 20 s. For all the alloys, the MnO-covered steel substrate exhibited reactive wetting whereas the $a-SiO_2$-covered steel exhibited nonreactive, nonwetting (${\theta}_c>90^{\circ}$) behavior. The MnO layer was rapidly removed by Al and Mg contained in the alloys. The wetting of the MnO-covered steel sheet significantly improved upon increasing the Mg content but decreased upon increasing the Al content, indicating that the surface tension of the alloy droplet is the main factor controlling its wettability. Although the reactions of Al and Mg in molten alloys with the $a-SiO_2$ layer were found to be sluggish, the wettability of Zn-Al-Mg alloys on the $a-SiO_2$ layer improved upon increasing the Al and Mg contents. These results suggest that the wetting of advanced high-strength steel sheets, the surface oxide layer of which consists of a mixture of MnO and $SiO_2$, with Zn-Al-Mg alloys could be most effectively improved by increasing the Mg content of the alloys.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.359-366
• /
• 2008

Hydrogen as a high-quality and clean energy carrier has attracted renewed and ever-increasing attention around the world in recent years, mainly due to developments in fuel cells and environmental pressures including climate change issues. In this processes for hydrogen production from fossil fuels, separation and purification is a critical technology. $(Ni_{60}-Nb_{40})_{95}-Pd_5$ alloy ingots were prepared by arc-melting the mixture of pure metals in an Ar atmosphere. Melt-spun ribbons were produced by the single-roller melt-spinning technique in an Ar atmosphere. Amorphous structure and thermal behavior were characterized by XRD and DSC. The permeability of the $(Ni_{60}-Nb_{40})_{95}-Pd_5$ amorphous alloy membrane was characterized by hydrogen permeation experiments in the temperature range 623 to 773 K and pressure of 2 bars. The maximum hydrogen permeability was $3.54{\times}10^{-9}[mol{\cdot}m^{-1}s^{-1}{\cdot}pa^{-1/2}]$ at 773 K for the $(Ni_{60}-Nb_{40})_{95}-Pd_5$ amorphous alloy.

• Journal of Magnetics
• /
• 제9권4호
• /
• pp.113-115
• /
• 2004

The magnetization properties have been measured for amorphous $Fe_{82}Mn_{8-x}B_xZr_{10}$ (x = 0-8) alloys. The temperature dependence of magnetization for these alloys shows the existence of antiferromagnetic couplings between Fe atoms in low fields at low temperatures. The magnetic parameters, obtained from the magnetization behavior are consistent with the presence of mixed magnetic state. The Curie temperature and magnetic moment increased with an increase of the concentration of B and spin glass like transition observed at low temperature decreases and finally vanishes at x = 8 at %. Our result suggests that the substitution of B for Mn seems to cause an increase of magnetic order.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.176-176
• /
• 2003

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.462-462
• /
• 2009

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.44-44
• /
• 1996

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2005년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.20-20
• /
• 2005