• Macromolecular Research
• /
• 제13권3호
• /
• pp.257-264
• /
• 2005

Polyurethanes containing z-Iysine segments in the main chain (PULL) were synthesized from 4,4'-diphe-nylmethyl diisocyanate, poly(tetramethylene glycol), and z-Iysine oligomer as a chain extender. The PULL film was treated first with a $10\%$ HBr-acetic acid solution and subsequently with a saturated sodium bicarbonate aqueous solution to produce a primary amine group on the surface (PULL-N). Lactobionic acid (LA)-immobilized PULL (PULL-L) was prepared by the coupling reaction of the PULL surface amine groups and the LA carboxylic acid groups. The surface-modified PULLs were then characterized by attenuated total reflection-Fourier transform infra-red spectroscopy, electron spectroscopy for chemical analysis, atomic force microscopy, and contact angle goniometry. In the hepatocytes adhesion experiment, the cells poorly adhered to the PULL surface, although they adhered moderately well to the PULL-N surface. On the other hand, the cells adhered well to the PULL-L surface, suggesting the good affinity of the surface $\beta$-galactose moieties for hepatocytes. When hepatocytes were cultured in the presence of epidermal growth factor for 48 h, the cells rapidly aggregated on the PULL-L surface, whereas they aggregated only slowly on the other surfaces. The PULL prepared in this study has the potential to be used as a coating material for the enhancement of hepatocyte adhesion.

• 폴리머
• /
• 제38권3호
• /
• pp.314-319
• /
• 2014

힌더드 아민기를 포함하고 있는 헤테로환을 가지며 알킬사슬 길이가 서로 다른 세 종류의 나일론 4 열안정제를 합성하였다. 힌더드 아민기를 이용하여 라디칼에 의한 열분해를 방지하고, 열안정제와 나일론 4의 아마이드기 간 수소결합을 조절하여 나일론 4의 열적 특성에 미치는 영향을 확인하였다. 안정제의 알킬사슬의 수가 4개일 때 수소결합이 가장 최적화되는 것으로 등온 TGA 결과를 통해서 확인하였다. 또한 시판중인 나일론 6의 열안정제를 사용하여 나일론 4에 대한 열안정성을 비교 실험한 결과, 합성 열안정제가 나일론 4의 열안정성을 실질적으로 향상시킨 것을 확인하였다.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.95-104
• /
• 2018

Copper pollution around the world has caused serious public health problems recently. The heavy metal adsorption on traditional membranes from wastewater is limited by material properties. Different adsorptive materials are embedded in the membrane matrix and act as the adsorbent for the heavy metal. The carbonized leaf powder has been proven as an effective adsorbent material in removing aqueous Cu(II) because of its relative high specific surface area and inherent beneficial groups such as amine, carboxyl and phosphate after carbonization process. Factors affecting the adsorption of Cu(II) include: adsorbent dosage, initial Cu(II) concentration, solution pH, temperature and duration. The kinetics data fit well with the pseudo-first order kinetics and the pseudo-second order kinetics model. The thermodynamic behavior reveals the endothermic and spontaneous nature of the adsorption. The adsorption isotherm curve fits Sips model well, and the adsorption capacity was determined at 61.77 mg/g. Based on D-R model, the adsorption was predominated by the form of physical adsorption under lower temperatures, while the increased temperature motivated the form of chemical adsorption such as ion-exchange reaction. According to the analysis towards the mechanism, the chemical adsorption process occurs mainly among amine, carbonate, phosphate and copper ions or other surface adsorption. This hypothesis is confirmed by FT-IR test and XRD spectra as well as the predicted parameters calculated based on D-R model.

• 대한치과의사협회지
• /
• 제11권6호
• /
• pp.383-386
• /
• 1973

The effects of isoproterenol, a sympathomimetic amine, on the mast cells in the oral mucosa were cytochemically studied in twenty four healthy male albino rats weighing approximately 100gm. seven groups of three each were injected intraperitoneally, as a single dose of 8mg/100gm. body wt., (dissolved in 0.9% saline 0.2㎖). Each groups were sacrificed following ether anesthesia at he time indicated, 1. 2. 3. 5. 7. 10. 14days after only a single injection. One normal group is not administered with any substances. The sections of oral mucosa were stained with 0.005% toluidine blue (Mowry's method) and alcian blue (pH 2.5). We found that isoproterenol made an initial decrease in the metachromasia and alcian blue affinity, and the number of mast cell, followed by an subsequent return to normal.

• Carbon letters
• /
• 제11권1호
• /
• pp.34-37
• /
• 2010

In this work, graphite nanofibers (GNFs) were prepared by ammonia and heat treatment at temperatures up to $1000^{\circ}C$ to improve its $CO_2$ adsorption capacity. The effects of the heat treatment on the textural properties and surface chemistry of the GNFs were investigated by $N_2$ adsorption isotherms, XRD, and elemental analysis. We found that the chemical properties of GNFs were significantly changed after the ammonia treatment. Mainly amine groups were formed on the GNF surfaces such as lactam groups, pyrrole and pyridines. The GNFs treated at $500^{\circ}C$ showed highest $CO_2$ adsorption capacity of 26.9 mg/g at 273 K in this system.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.612-618
• /
• 2005

A mucoadhesive microsphere was prepared by an interpolymer complexation and solvent evaporation method, using chitosan and poly(acrylic acid) (PAA), to prolong the gastric resid ence time of the delivery system. The Fourier transform infrared results showed that microspheres were formed by an electrostatic interaction between the carboxyl groups of the PAA and the amine groups of the chitosan. X-ray diffraction and differential scanning calorimetry analysis showed that the enrofloxacin in the chitosan-PAA microsphere was molecularly dispersed in an amorphous state. Scanning electron microscopy of the surface and the quantity of mucin attached to the microspheres indicated that chitosan-PAA microspheres had a higher affinity for mucin than those of chitosan alone. The swelling and dissolution of the chitosan-PAA microspheres were found to be dependent on the pH of the medium. The rate of enrofloxacin released from the chitosan-PAA microspheres was slower at higher pH; therefore, based on their mucoadhesive properties and morphology, the chitosan-PAA microspheres can be used as a mucoadhesive oral drug delivery system.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1003-1008
• /
• 2009

The $O_sO_4$-catalyzed dihydroxylations of a monosubstituted allylic amine and $\gamma-amino-\alpha,\;\beta-unsaturated$ (E)-esters with bulky alkyl groups showed a high anti-selectivity. Since the acyclic conformation of N-acyloxy protected allylic amines was efficiently controlled by a bulky t-Bu or OBO ester group, the anti diastereoselectivity of >12.5:1 was obtained without applying a chiral reagent. The synthetic utility of the present method was demonstrated by a stereoselective and efficient synthesis of an $\alpha$-glucosidase inhibitor 15 from commercially available N-Cbz-L-serine 6 in 11 steps and 31% yield.

• Advances in nano research
• /
• 제6권4호
• /
• pp.357-375
• /
• 2018

Two dimensional (2D) atomic layered nanomaterials exhibit some of the most striking phenomena in modern materials research and hold promise for a wide range of applications including energy and biomedical technologies. Graphene has received much attention for having extremely high surface area to mass ratio and excellent electric conductivity. Graphene has also been shown to maximize the activity of surface-assembled metal nanoparticle catalysts due to its unique characteristics of enhancing mass transport of reactants to catalysts. This paper specifically investigates the strategy of pre-formed nanoparticle self-assembly used for the formation of various metal nanoparticles supported on graphene families such as graphene, graphene oxide, and reduced graphene oxide and aims at understanding the interactions between ligand-capped metal nanoparticles and 2D nanomaterials. By varying the functional groups on the ligands between alkyl, aromatic, amine, and alcohol groups, different interactions such as van der Waals, ${\pi}-{\pi}$ stacking, dipole-dipole, and hydrogen bonding are formed as the 2D hybrids produced.

• 대한화학회지
• /
• 제19권2호
• /
• pp.116-122
• /
• 1975

Benzyl arenesulfonate와 피리딘과의 아세톤 용매중에서의 反應速度를 測定하였다. Benzyl arenesulfonate의 離脫基의 치환기효과는 p-MeO基 및 $p-NO_2$기를 除外하고는 Hammett 式에 잘 적용되었으며, 전자끄는기는 반응속도를 증가시켰다. 離脫基의 치환효과는 벤질炭素에 아민이 親核的으로 공격하여 전이상태에서 치환기의 電子끄는 능력이 C-N 結合의 形成과 C-O結合의 쪼개짐에 변화를 주고 있다는 사실로서도 설명이 되어진다. 치환기효과는 benzyl p-bromobenzeneslfonate가 benzyl p-nitrobenzenesulfonate보다 N-C結合이 tight 한 전이상태의 구조를 가지고 있음을 말해주며 이는 結合의 형성과 쪼개짐에 있어 Thornton의 $S_N2$전이상태 구조의 예상과도 잘 符合된다.

• Restorative Dentistry and Endodontics
• /
• 제34권4호
• /
• pp.333-339
• /
• 2009

현행 복합레진에서 가장 많이 사용되고 있는 광중합개시제의 일종인 camphoroquinone은 중합 효과가 적고 황색을 띠기 때문에 다른 개시제에 대한 연구가 이루어져 왔다. 이에 본 연구에서는 새로운 개시제인 OPPI (p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate)를 기존의 camphoroquinone, amine과 다양한 비율로 혼합한 다음, barium glass를 첨가한 실험용 복합레진을 제조하여 각 수복재의 미세누출도를 비교, 평가하였다. 총 4종의 단량체를 제조하였으며 camphoroquinone, OPPI, amine의 조성 중량비는 다음과 같다: A군 - 0.5%, 0%, 1% / B군 - 2%, 0.2%, 2% / C군 - 0.2%, 1%, 0.2% / D군 - 1%, 1%, 2%. 이후 평균 입자 크기 1 ${\mu}m$의 3.2% silane 처리된 barium glass를 중량비 78%로 섞어 복합레진을 제조하였다. 총 55개의 소구치에 치경부를 중심으로 원형 와동을 (직경; 근원심 폭경의 2/3, 깊이; 1.5 mm) 형성한 다음, 자가부식형 접착시스템인 Hybrid Bond로 처리하고 4종의 복합레진으로 수복하였다. 연마 후 치아를 섭씨 5도와 55도에서 각기 30초씩 담궈 500회의 열순환 처리하였으며 전기화학적 방법으로 전기 전도성을 2회 (열순환 처리 후, 1주 간격으로 식염수를 교환하며 3개월 보관 후) 측정, 비교하였다. 미세누출도는 시간 경과에 따라 커지는 양상을 보였으며, 열순환 처리 직후 4종 복합레진 사이에 차이를 보이지 않았지만, 3개월 보관 후에는 D군이 가장 적었으며 C군이 가장 큰 미세누출을 보였다. 열순환 자극 직후 차이를 보이지 않았지만, 3개월 보관 후 측정치로 미루어 볼 때, OPPI와 전반적인 중합시스템이 고농도로 함유된 복합레진(D군)과 CQ와 아민만을 사용한 전통적인 복합레진(A군)이 중합개시시스템을 저농도로 함유한 복합레진(C군)에 비해 우수한 밀폐효과를 보였다. 이는 시간의 흐름에 따라 접착계면의 퇴화가 일어났거나 일부 성분이 용해가 되어 나온 것으로 보이며 앞으로 이에 대한 더 많은 연구가 필요할 것으로 사료된다.