• 한국의류학회지
• /
• 제20권4호
• /
• pp.682-689
• /
• 1996

A preparative method has been proposed for obtaining chitosan products which have a desired degree of deacetylation (DD, %) without much decrease in molecular weight. Deacetylation was prepared by two methods. The method I which was proposed by Domard etc. was that DMSO/thiophenol was used repeatedly only during the deacetylation, the method II was that DMSO/thiophenol was used after the alkali treatment. Then, effective deacetylation was performed by the method ll. To determine the degree of deacetylation, potentiometric titration method was adopted. According to the increase of DD, the viscosity average moleclar weght $(\overline{M\upsilon}$) and the DP of the chitosan products were decreased. The intensity of FT-lR peak appeared at $1655cm^{-1}, which was characteristic peak of amide I (Nacetyl secondary amide group), was gradually decreased with deacetylation. X-ray analysis showed that the lattice-spacing in the chitosan film increased with the degree of deacetylation, but the difference of the transparency of the chitosan products was not diverged significantly.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.399-403
• /
• 2008

Monodisperse, micron-sized, hybrid particles having a core-shell structure were prepared by coating the surface of poly(methyl methacrylate)(PMMA) microspheres with silica and by copolymerizing acrylamide (AAm) to supply the hydrogen bonding effect by means of the amide groups. Tetraethoxysilane (TEOS) was then slowly dropped onto the medium under certain conditions. Because of the hydrogen bonding between the amide of the PMMA particles and the hydroxyl group of the hydrolyzed silanol, a silica shell was generated on the PMMA core particles. The morphology of the hybrid particles was investigated with transmission (TEM) and scanning (SEM) electron microscopy as a function of the medium conditions and the amount of TEOS. Improved thermal properties were observed by TGA analysis.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.162-168
• /
• 2011

Many ligands have been experimentally designed and tested for their activities as inhibitors against bacterial enoyl-ACP reductase (FabI), ENR. Here the binding energies of the reported ligands with the E. coli ENR-$NAD^+$ were calculated, analyzed and compared, and their molecular dynamics (MD) simulation study was performed. IDN, ZAM and AYM ligands were calculated to have larger binding energies than TCL and IDN has the largest binding energy among the considered ligands (TCL, S54, E26, ZAM, AYM and IDN). The contribution of residues to the ligand binding energy is larger in E. coli ENR-NAD+-IDN than in E. coli ENR-$NAD^+$-TCL, while the contribution of $NAD^+$ is smaller for IDN than for TCL. The large-size ligands having considerable interactions with residues and $NAD^+$ have many effective functional groups such as aromatic $\pi$ rings, acidic hydroxyl groups, and polarizable amide carbonyl groups in common. The cation-$\pi$ interactions have large binding energies, positively charged residues strongly interact with polarisable amide carbonyl group, and the acidic phenoxyl group has strong H-bond interactions. The residues which have strong interactions with the ligands in common are Y146, Y156, M159 and K163. This study of the reported inhibitor candidates is expected to assist the design of feasible ENR inhibitors.

• Bulletin of the Korean Chemical Society
• /
• 제18권10호
• /
• pp.1085-1089
• /
• 1997

A new HPLC chiral stationary phase (CSP 3) has been prepared by connecting N-phenyl N-propyl amide of (S)-naproxen to silica gel through the 6-methoxy-2-naphthyl group of (S)-naproxen. The new CSP has been applied in resolving a homologous series of N-(3,5-dinitrobenzoyl)-α-amino acid esters and a homologous series of N-(3,5-dinitrobenzoyl)-α-(4-alkylphenyl)alkylamines. The separation factors, α, for resolving a homologous series of N-(3,5-dinitrobenzoyl)-α-amino esters and a homologous series of N-(3,5-dinitrobenzoyl)-α-(4-alkylphenyl)alkylamines on the new CSP have been found to remain almost constant throughout the wide range of the length of the alkyl substituent of the analytes while those on the previously reported CSPs (CSP 1 and 2) which were prepared by connecting N-phenyl N-propyl amide of (S)-naproxen to silica gel through the N-propyl group increase or decrease continuously. These results are concluded to support the chiral recognition models which utilize the intercalation of the alkyl substituent of the racemic analytes between the adjacent strands of CSP 1 or 2 to rationalize the increasing or decreasing trends of separation factors.

• Journal of Pharmaceutical Investigation
• /
• 제22권3호spc1호
• /
• pp.49-63
• /
• 1992

Two different types of chemical manipulations of dobutamine were investigated in order to develop novel, improved cardiotonic drugs. Three new analogues of carbostyril, in which the m-hydroxy group of dobutamine was isosterically modified with an amide type carbostyril system, were synthesized from, ${\rho}-methoxyphenethylamine$ via multi-steps. Two analogues of (2'-aminoethyl)-1-hydroxy-2-pyridone system which has isosteric structural similarity with dopamine without having the COMT vulnerable m-hydroxy group were synthesized via 12 synthetic steps. Their biological stabilities in various media and inotropic activities were evaluated.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2351-2356
• /
• 2010

Various dienamide derivatives were synthesized in reasonable yields from benzonitriles having an amide moiety at the ortho-position, via the sequential (i) In-mediated allylation of nitrile moiety to form an imine intermediate, (ii) intramolecular quenching of an acyl group by the imine intermediate, and (iii) a proton transfer to dienamide.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.460-464
• /
• 2011

Poly(ether-block-amide)(PEBA, $PEBAX^{TM}$)는 열가소성 탄성체(thermoplastic elastomer, TCU)로서 hard-rigid amide block과 soft-flexible ether block으로 구성되어 있으며, 분자량과 두 block간의 구성비에 따라 여러 종류가 있다. $PEBAX^{TM}$는 분리막소재로 이용할 경우, $PEBAX^{TM}$의 hard amide block은 우수한 기계적 특성과 선택도를, 그리고 soft ether block은 높은 투과도를 제공할 수 있다. 따라서 본 연구에서는 2종류의 $PEBAX^{TM}$를 사용하여 기체분리막을 제조하고, 종류에 따른 이산화탄소와 메탄의 투과특성 변화를 연구하였다. 또한 순수 $PEBAX^{TM}$ 분리막의 투과특성을 향상시키기 위해 무기전구체로서 TEOS(tetraethoxysilane)를 사용하여 $PEBAX^{TM}$/TEOS 하이브리드막을 제조하고, 그 투과특성을 순수 $PEBAX^{TM}$ 분리막의 결과와 비교하였다. 순수 $PEBAX^{TM}$-1657과 $PEBAX^{TM}$-2533 분리막의 투과도 측정 결과, ether block의 비율이 상대적으로 높은 $PEBAX^{TM}$-2533 분리막의 투과도 계수가 보다 높은 투과도 계수값을 가졌다. 이는 $PEBAX^{TM}$-2533의 경우, 상대적으로 높은 ether block 함량 때문에 고분자 사슬의 유연성이 보다 크기 때문으로 볼 수 있다. $PEBAX^{TM}$/TEOS 하이브리드 분리막의 투과특성을 순수 $PEBAX^{TM}$ 분리막의 결과와 비교할 때, 하이브리드 분리막의 기체 투과도 계수가 보다 높음을 알 수 있다. 이는 TEOS의 축합반응으로 생성된 silica domain에 의해 결정성이 감소하고 또한 이산화탄소와 silanol group과의 친화도(affinity) 증가에 따른 용해도가 증가하기 때문으로 볼 수 있다. 하이브리드 분리막의 투과도 계수 증가에도 불구하고 이상분리인자는 거의 비슷하거나 약간 감소하였음을 알 수 있다. 이는 이산화탄소와 silanol group의 친화도 증가로 인한 용해선택도의 증가에 기인한 것으로 볼 수 있다.

• 멤브레인
• /
• 제29권1호
• /
• pp.1-10
• /
• 2019

Poly(ether block amide) (PEBA)는 이산화탄소 분리에 매우 적합한 상용 블록 공중합체 중 하나이다. 기체분리막의 경우 높은 투과도 뿐 아니라 강한 기계적 강도 또한 필요로 한다. PEBA공중합체의 결정성 폴리아마이드(polyamide) 블록은 기계적 강도를 제공하며 동시에 rubbery한 폴리에테르(polyether) 부분은 이산화탄소와의 친화도를 부여하여 이산화탄소 촉진 수송에 기여한다. PEBA공중합체에서 결정성 상과 rubber한 상의 조성은 기체분리막에 적합하게 조절될 수 있다. PEBA 공중합체를 기반으로 한 분리막은 좋은 투과도를 갖지만 추가적으로 분자체 효과를 이용하여 큰 기체 투과도 손실 없이 분리막의 선택도를 향상시킬 수 있다. 혼합 매질 분리막은 혼합막의 한 종류로서 고분자 매트릭스와 유기 첨가제로 이루어져 있다. 하지만 고분자 매트릭스와 유기 첨가제간의 양립성(compatibility)에 따른 문제점 또한 존재한다. 따라서 본 총설에서는 PEBA 공중합체를 기반으로 한 혼합막의 장점과 한계에 대해 다루고자 한다.

• 폴리머
• /
• 제33권2호
• /
• pp.158-163
• /
• 2009

본 연구에서는 잘 정의된 덴드리틱 폴리스티렌-블록-선형 폴리(3차 부틸 아크릴레이트) 공중합체를 성공적으로 합성하였다. 음이온 중합법을 통해 합성된 폴리스티렌($M_n$=1000 g/mol)을 외곽부분으로 함유하는 덴드론의 수산기 그룹을 토실화(tosylation), 아지드화(azidation), 환원(reduction) 반응을 통해 아민기로 전환하였다. 한편, 선형 poly(t-butyl acrylate)는 DMF 용매에서 benzyl 2-bromopropanoate/Cu(I)Br, PMDETA/t-butylacrylate를 각각 개시제/촉매 시스템/단량체로 사용하여, 원자이동라디칼 중합법(atom transfer radical polymerization, ATRP)을 통해 합성할 수 있었고, 말단을 카르복시산 그룹으로 전환하기 위해 수소기체 환경하에서 Pd/C 을 사용하여 탈벤질화(debenzylation) 반응을 수행하였다. 마지막으로, 합성된 덴드리틱 및 선형 블록들을 다이메틸아미노피리딘(4-(dimethylamino)pyridine, DMAP)과 다이아이소프로필카보다이이미드(N,N'-diisopropylcarbodiimide, DIPC)를 이용한 아미드 커플링 방법을 통해 최종 덴드리틱-선형의 블록공중합체를 합성하였다. 합성된 블록공중합체를 수소원자핵공명법 및 겔침투크로마토그래피 방법을 통해 조사한 결과, 잘 정의된 분자량 및 낮은 분자량 분포를 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.26-33
• /
• 2004

Two reactive disperse dyes having $\alpha$-bromoacrylamide or acrylamide group were synthesized and their dyeing properties were compared with a disperse dye. Dyeing properties of reactive disperse dyes were strongly influenced by the chemical structure of reactive group. The amount of absorbed reactive disperse dye containing $\alpha$-bromoacrylamide group on polyester fiber was less than the disperse dye, and that on nylon fiber was much higher. When polyester and nylon fiber were simultaneously dyed in a dye pot, nylon fiber absorbed the reactive disperse dye more than polyester fiber. The reactive disperse dye having acrylamide group could reduces difference in color depth to a large extent, but the application of carrier or variation of dyebath pH were not sufficient for giving the same color depth to both fibers. The N/P union fabric could be dyed with the reactive disperse dye and its wash fastness were good to excellent.