• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.1
• /
• pp.23-30
• /
• 2012

In the state that re-evaluation of calculating optimum amount of incineration in the future is needed, as considering the amount of waste, increase of heat value and change in floating population in each area in city B, the purpose of this research was to predict optimum available capacity in incineration plant and to study alternatives for the amount of disposal in each incineration plant based on the available capacity that was predicted. As a result of predicting the change in population based on progress of population in city B in the past, it is expected that an overall population is decreasing, but in some areas, population is concentrated due to increased apartment complexes, showing similar figures as the present. Moreover, when predicting the amount of waste through forecasting population, it is considered that the amount of waste by decreased population is also decreasing. However, the amount of combustible component among a total amount of waste is expected to increase, so it is predicted that the amount of incineration and combustible component will be reasonable except D incineration plant, Therefore, D incinerating plant showed 72.7% of rate of utilization of incineration facility compared to 59.1% of national rate. However, if shortfall of waste in the future can be used wisely in other areas, the use of renewable energy using burner useless heat can be maximized.

• Journal of Environmental Impact Assessment
• /
• v.25 no.1
• /
• pp.63-76
• /
• 2016

In 2015, Summits of State and Government at United Nations General Assembly agreed to set the world on a path towards Sustainable Development(SD) through the adoption of the 2030 Agenda. 2030 Agenda adopts 17 Sustainable Development Gooals(SDG) to achieve 3 pillars of social security, economic efficiency and environmental integrity. Sustainable Development Indicators(SDI) which are suggested by UN SDSN(United Nations Sustainable Development Solutions Network), have been developed for measuring SDG implementation, by which Sustainability Assessment(SA) can be accomplished to check through more holistic approaches to poverty alleviation, social inclusion and environmental management. In Korea, Strategic Environmental Impact Assessment(SEIA) has been applied to PPP(policy, plan, program) by 'Ministry of Environment', whereas 'National Land Planning Assessment(NLPA) which is one sort of SEA has been implemented to evaluate PPP of Ministry of Land, Infrastructure and Transport'. Although SEIA and NLPA have been utilized as decision-making support tools for stakeholders including high authorities, the reference criteria of these institutions are not considered as convincible and communicable. Evaluation criteria of alternatives which are core principles for SEIA and NLPA seem so ambiguous and unscientific. Through incorporation of SDI into SEIA, a convenient, quick and credible diagnosis of the key dimensions of SD comprising social equity, economic development and environmental management, can help develop a shared understanding of priorities of implementation of SDG.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.559-563
• /
• 2016

Recently, a barium(Ba) and an iodine(I) being studied as a conventional lead(Pb) alternatives of shielding material has excellent shieding rate, but the characteristic x-ray photons in the energy range near 30 keV line is released. In this study, with bismuth oxide(BiO) coupled barium sulfate($BaSO_4$) double layer, transmitted spectra, shieding rates and relative weighting rates were evaluated to validate the applicability of eco-friendly double layer shieding structure using monte carlo simulations as a prior study. From the evaluation results, in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer, the shieding rate showed 1.9% and 3.9% higher than 0.6mm thickness of Pb single layer, respectively. In addition, the relative weight also 28% and 34.5% lower than 0.6mm-Pb in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.121-133
• /
• 2014

Block copolymers including ABA triblock architectures are useful as thermoplastic elastomers and toughened plastics depending on the relative glassy and rubbery content. These materials can be blended with other polymers and utilized as additives, toughening agents, and compatibilizers. Most of commercially available block copolymers are derived from petroleum. Renewable alternatives are attractive considering the finite supply of fossil resources on earth and the overall economic and environmental expenses involved in the recovery and use of oil. Furthermore, tomorrow's sustainable materials are demanding the design and implementation with programmed end-of-life. The present review focuses on the preparation and evaluation of new classes of renewable ABA triblock copolymers and also emphasizes on the use of carbohydrate-derived poly(lactide) or plant-based poly(olefins) having a high glass transition temperature and/or high melting temperature for the hard phase in addition to the use of bio-based amorphous hydrocarbon polymers with a low glass transition temperature for the soft components. The combination of multiple controlled polymerizations has proven to be a powerful approach. Precision-controlled synthesis of these hybrid macromolecules has led to the development of new elastomers and tough plastics offering renewability, biodegradability, and high performance.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.115-125
• /
• 2003

The concrete median barriers are the most popular safety appurtenance that can be installed on narrow medians and are effective in keeping uncontrolled vehicles from crossing into opposing lanes of traffic. It is necessary to install and maintain median barriers because it is very difficult to reserve enough room required for medians in KOREA. Also, concrete median barriers are accepted as the actual alternatives for median barriers, mostly because they require almost no maintenance even after serious collisions. Typical concrete median barriers are 810mm high and have 596mm high glare screens on top of them. However we have experienced a number of "climb" and "roll-over" accidents of heavy vehicles and most of all, there have been some serious accidents caused by the part of broken glare screens. So the improvement study of concrete median barriers started. Prior to this study, a new type of concrete median barrier was suggested which is 1,270mm high and has no glare screens on top of it. So it was required to compare the properties of various types of concrete median barriers including the new type to find the optimal type of concrete median barrier. In this study, we have evaluated the characteristics of four types of concrete median barriers (New Jersey type, F type, constant slope type, and wall type). We have performed many computer simulations for the evaluation of the crashworthiness of them, and through the simulations we have tried to find a proper type of concrete median barrier. Through the computer simulations, we evaluated the structural stability and safety of the four types of concrete median barriers. We confirmed the structural stability and safety of them But in regard to the probability of "roll-over" of heavy vehicles, the higher concrete median barriers showed better performances than the lower. As the result of this study a new type of concrete median barrier was recommended.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.297-302
• /
• 2011

This study was carried out to estimate average inbreeding coefficients, relatedness and effective population size of breeding bulls and to suggest optimal alternatives on problems of current Hanwoo improvement system. Data on proven and young bulls were obtained from 1,128 heads of Livestock Improvement Main Center from 1983 to 2008. Pedigree information on proven and young bulls was obtained from 3,760 heads of Korea Animal Improvement Association. Average inbreeding coefficients and average relatedness of proven and young bulls were estimated at the range of 0.04-0.07%, 0.10-6.82%, respectively. Effective population size was estimated for 220 heads from the average rate of inbreeding of last 26 years. Average inbreeding coefficient is rising rapidly for the last two years as well as average relatedness. Effective population size was estimated for 47 heads for the last five years. These results suggest that selection criteria of proven bulls should include not only genetic evaluation of carcass performance from progeny-test, but also inbreeding and relationship coefficients, in order to maintain genetic variability of Hanwoo. In addition, effective population size should be increased by increasing the number of proven bulls.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.8
• /
• pp.1284-1291
• /
• 2020

Objective: To evaluate the effects of the carmine cochineal-resistant spineless cactus genotypes cv. Orelha de Elefante Mexicana (Opuntia) and Miúda (Nopalea) on the intake and digestibility of nutrients, ingestive behavior, performance, and ultrasound measurements of growing lambs. Methods: Thirty-six male (non-castrated) Santa Inês lambs were used, with an average age of 6 months and an initial average weight of 22.0±2.9 kg. They were distributed in a completely randomized design with 3 treatments (Tifton hay, Nopalea and Opuntia) and 12 replications, using initial weight as a covariate. The experimental period was 86 days, with the first 30 days used for the adaptation of the animals to the facilities, diets and management, and the remaining 56 days used for evaluation and data collection. Results: The intake and apparent digestibility of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF), total carbohydrates (TC), non-fibrous carbohydrates (NFC), and total digestible nutrients (TDN) showed a significant difference (p<0.05) as a function of the diets, with the Nopalea treatment (p<0.05) increasing DM intake (g/kg and % body weight [BW]), CP, TDN, and TC digestibility, whereas the Tifton hay diet led to a high (p<0.001) neutral detergent fiber corrected for ash and protein (NDFap) g/d intake, NDFap (BW %) and digestibility of said nutrient. There was no effect of treatments (p>0.05) on feeding time, however, rumination time and total chewing time were higher (p<0.05) for animals fed Tifton hay. The performance of the animals was similar (p>0.05). For the ultrasound measurements, Nopalea promoted an increase in the final loin eye area, compared to Tifton hay. Conclusion: The use of spineless cactus variety Miúda leads to the greater intake and digestibility of nutrients. The evaluated carmine cochineal-resistant spineless cactus genotypes are alternatives for semi-arid regions as they do not negatively affect the performance of growing lambs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.143-154
• /
• 2012

As demand of water resources and attentions to changes in climate (e.g., due to ENSO) increase, long/short term prediction of precipitation is getting necessary in water planning. This research evaluated the ability of MM5 to predict precipitation in the Tampa Bay region over 23 year period from 1986 to 2008. Additionally MM5 results were statistically bias-corrected using observation data at 33 stations over the study area using CDF-mapping approach and evaluated comparing to raw results for each ENSO phase (i.e., El Ni$\tilde{n}$o and La Ni$\tilde{n}$a). The bias-corrected model results accurately reproduced the monthly mean point precipitation values. Areal average daily/monthly precipitation predictions estimated using block-kriging algorithm showed fairly high accuracy with mean error of daily precipitation, 0.8 mm and mean error of monthly precipitation, 7.1 mm. The results evaluated according to ENSO phase showed that the accuracy in model output varies with the seasons and ENSO phases. Reasons for low predictions skills and alternatives for simulation improvement are discussed. A comprehensive evaluation including sensitivity to physics schemes, boundary conditions reanalysis products and updating land use maps is suggested to enhance model performance. We believe that the outcome of this research guides to a better implementation of regional climate modeling tools in water management at regional/seasonal scale.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.192-199
• /
• 2013

The Tandong-cheon stream is a 7.4 km long small urban stream that passes through Daeduk Science Town in Daejeon Korea. Despite the stream has great potential as an educational and recreational site due to its central location in the science town and science museums nearby, environmental aspect especially for water quality has not been evaluated properly. Through field survey, major pollution sources of the stream were identified and effect of water quality improvement alternatives were evaluated using a QUAL2K water quality model for the stream. The study indicated that controlling major pollution sources of the stream alone may not be sufficient for reaching the water quality target. Therefore, additional pollution control methods are necessary. We applied the developed model to evaluate the effects of a constructed wetland on the terrace land, and analyzed whether the water quality target can be met at the outlet of the stream. It is expected that this study would provide a good reference for environmentally sound management of small urban streams in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.705-716
• /
• 2017

As many environmental pollution problems have arisen, various studies related to the environmental evaluation have been carried out in the construction industry. However, there is no methodology for estimating the environmental load quickly for design alternatives of civil facilities in the design phase. This study aim to establish criteria of works information and designed parts which can efficiently estimate environmental loads of PSC beam bridge based on standard quantity at the early design phase. For this purpose, a detailed environmental loads database was constructed by performing Life Cycle Assessment (LCA) based on detailed design data of 25 bridges. In addition, major work with high impact on environmental load were selected, and the analysis of characteristics of environmental load according to the required materials and 8 impact categories were conducted. As a result, the superstructure accounted for 42.91%. In the superstructure, remicon of the material base and PSC beam work occupied 53.13% and 31.25%. In the substructure, remicon, rebar, and cement, which are material base, accounted for more than 93%. It is expected that this major work and material information for each part of bridge can be utilized in the construction of the model, which can estimate the approximate environmental load, reflecting the characteristics of the structure in the design phase.