• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.419-427
• /
• 2007

In wavelength-division-multiplexing(WDM) networks a link failure may cause the failure of several high-bit-rate optical channels, thereby leading to large data loss. Recently, various protection and restoration mechanisms have been proposed to efficiently deal with this problem in mesh networks. Among them, dedicated path protection(DPP) is a promising candidate because of its ultra-fast restoration time and robustness. In this work we investigate the issue of planning and optimization of WDM networks with DPP. Integer linear programming(ILP), in particular, is one of the most common exact method to solve the design optimization problem for protected WDM networks. Traditional ILP formalizations to solve this problem rely on the classical flow or route formulation approaches, but both these approaches suffer from a excessively high computational burden. In this paper, we present a variable-aggregation method that has the ability of significantly reducing the complexity of the traditional flow formulation. We compare also the computational burden of flow formulation with variable aggregation both with the classical flow and route formulations. The comparison is carried out by applying the three alternative methods to the optimization of two case-study networks.

• Journal of KIISE:Databases
• /
• v.29 no.2
• /
• pp.138-147
• /
• 2002

The concept of the critical path in the workflow is important because it can be utilized In many issues in workflow systems, e.g., workflow resource management and workflow time management. However, the critical path in the contest of the workflow has not been much addressed in the past. This is because control flows in the workflow, generally including sequence, parallel, alternative, iteration and so on, are much more complex than those in the ordinary graph or network. In this paper we first describe our workflow model that has considerable work(low control constructs. They would provide the sufficient expressive power for modeling the growing complexities of today's most business processes. Then, we propose a method to systematically determine the critical path in a workflow schema built by the workflow control constructs described in our workflow model.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.67-74
• /
• 2011

In recent years, with increasing utilization of mobile devices such as smartphones, the need for PNS(Pedestrian Navigation Systems) that provide guidance for moving pedestrians is increasing. For the navigation services, road network is the most important component when it comes to creating route and guidance information. In particular, pedestrian network requires modeling methods for more detailed and vast space compared to road network. Therefore, more efficient method is needed to establish pedestrian network that was constructed by existing field survey and manual editing process. This research proposed a pedestrian network creation method appropriate for pedestrians, based on CNS(Car Navigation Systems) data that already has been broadly constructed. Pedestrian network was classified into pedestrian link(sidewalk, side street, walking facility) and openspace link depending on characteristics of walking space, and constructed by applying different methodologies in order to create path that similar to the movements of actual pedestrians. The proposed algorithm is expected to become an alternative for reducing the time and cost of pedestrian network creation.

• IE interfaces
• /
• v.3 no.2
• /
• pp.23-38
• /
• 1990

The use of robots for painting operations is a powerful alternative as a means for automation and quality improvement. A typical method being used for motion planning of the painting robot is to guide the robot along the desired path : the "lead-through" method. Although this method is simple and has been widely used, it has several drawbacks a) The robot cannot be used during the teaching period, b) A human is exposed to a hostile environment, c) The motions taught are, at best, human's skill level. To deal with the above problems, an integrated robot-trajectory planning scheme is presented. The new scheme takes CAD data describing the shape and geometry of the objects, and outputs an optimal trajectory in the sense of coating thickness and painting time. The purpose of this paper is to investigate theoretical backgrounds for such a scheme including geometric modeling, painting mechanics and robot trajectory planning, and develop algorithms for generating spray gun paths and minimum-time robot trajectories. Future study is to implement these algorithms on an workstation to develop an integrated software system ; ATPS(Automatic Trajectory Planning System) for spray painting robots.

• Journal of the Korean Regional Science Association
• /
• v.14 no.2
• /
• pp.107-126
• /
• 1998

Since the election of governors and mayors by vote, many local governments in Korea establish long-range plans for their regional development. The major purposes of the plans are to set up development path for their communities and to devise economic development strategies. But most of the plans established thus formulated by the same method utilized in centralized political regime. This method is considered no longer appropriate to devise the long-range development plans for local government especially in the era of globalization and localization, where local governments behave independently, where local governments behave independently competition. We suggest an alternative way to establish such plans, based on the method employed in business sector. The plans, formulated in this way, are called strategy oriented long-range development plans. The underlying logic for the plans is non-linear one. The plans are issue oriented and focus more on process than outcome. Given that these features are properly incorporated in the plans, we expect that the strategy oriented long-range development plans can be genuine guidelines for local economic development in the years to come.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.132-133
• /
• 2015

Efficient scheduling and resource management are the key factor to reduce construction project budget (e.g., labor cost, equipment cost, material cost, etc.). Resource-based line of balance (LOB) technique has been used to complement the limitations of time-driven scheduling techniques (e.g., critical-path method). Optimizing construction alternatives contributes cost savings while honoring the project deadline. However, existing LOB scheduling is lack of identifying optimal resource combination. This study presents a method which identifies the optimal construction alternatives, hence achieving resource minimization in a repetitive construction by using genetic algorithm (GA). The method provides efficient planning tool that enhances the usability of the system.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.158-160
• /
• 2015

Efficient scheduling and resource management are the key factor to reduce construction project budget (e.g., labor cost, equipment cost, material cost, etc.). Resource-based line of balance (LOB) technique has been used to complement the limitations of existing time-driven scheduling techniques (e.g., critical-path method). Optimizing construction alternatives contributes to cost savings while honoring the project deadline. However, existing LOB scheduling is lack of identifying optimal resource combination. This study presents a method which identifies the optimal construction alternatives, hence achieving resource minimization in a repetitive construction by using genetic algorithm (GA). The method provides efficient planning tool that enhances the usability of the system.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.177-187
• /
• 2006

It is known that over one million car navigation devices are being currently used in Korea. Most. if not all, route guidance systems, however, Provide only one "best" route to users, not providing any options for various types of users to select. The current practice dose not consider each individual's different preferences. These days, a vast amount of information became available due to the rapid development in information processing technology. Thus, users Prefer choices to be given and like to select the one that suits him/her the "best" among available information. To provide such options in this Paper, we developed an algorithm that provides alternative routes that may not the "least cost" ones, but ones that are close to the "least cost" routes for users to select. The algorithm developed and introduced in the paper utilizes a link-based search method, rather than the traditional node-based search method. The link-based algorithm can still utilize the existing transportation network without any modifications, and yet enables to provide flexible route guidance to meet the various needs of users by allowing transfer to other modes and/or restricting left turns. The algorithm developed has been applied to a toy network and demonstrated successful implementation of the multi-path search algorithm for multi-purpose activities.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1216-1223
• /
• 2018

As field of application of AMI, AMR uses the power line as the primary means of communication. PLC has a big merit without installation of the new network for communication in a field using the power line which is the existing equipment. However, there is a serious obstacle in commercialization for the instability by noise and communication environment. Therefore, the technical method for maintaining the communication state which overcome such demerit and was stabilized is required essentially. PLC routing technology is applied with the alternative plan now. The routing technology currently managed by field includes many problems by applying the algorithm of an elementary level. PLC routing path search problem can be modeled with the problem of searching for optimal solution as similar to such as optimal routing problem and TSP(Travelling salesman problem). In this paper, in order to search for a PLC routing path efficiently and to choose the optimal path, GA(Genetic Algorithm) was applied. Although PLC was similar in optimal solution search as compared with typical GA, it also has a difference point by the characteristic of communication, and presented the new methodology over this. Moreover, the validity of application technology was verified by showing the experimental result to which GA is applied and analyzing as compared with the existing algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.211-223
• /
• 2018

Mobile relay systems have been adopted by $4^{th}$ generation mobile systems as an alternative method to extend cell coverage as well as to enhance the system throughput at cell-edges. In order to achieve such performance gains, the mobile relay systems require path selection and resource allocation schemes that are specifically designed for these systems which make use of additional radio resources not needed in single-hop systems. This paper proposes an integrated path selection and resource allocation scheme for LTE-Advanced relay systems using collaborative communication. We first define the problem of maximizing the downlink throughput of LTE-Advanced relay systems using collaborative communication and transform it into a multi-dimensional multi-choice backpacking problem. The proposed Lagrange multiplier-based heuristic algorithm is then applied to derive the approximate solution to the maximization problem. It is shown through simulations that the approximate solution obtained by the proposed scheme can achieve a near-optimal performance.