• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.387-394
• /
• 2010

The alternative load path method based on a column removal scenario has been commonly used to protect building structures from being progressively collapsed due to probable blast loading. However, this method yields highly conservative result when the columns still have substantial load resisting capacity after blast. In this study, the behavior of RC columns with rectangular and circular sections under the blast loading was investigated and the remaining capacity of the partially damaged columns was compared. AUTODYN which is a hydrocode for the analysis of the structure on the impact and blast loading was used for this study. The blast loading was verified with the experiment results. The analysis results showed that the circular columns are preferable to the rectangular ones in respect of the blast resistance performance.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.117-124
• /
• 2015

As the acceptance of statistical analysis has been increased because of Big Data, the needs for an advanced second generation of statistical analysis method like Structural Equation Model are also increasing. This study suggests how R-Program, as open software, can be utilized when Partial Least Square Model, one of the SEMs, is applied to statistical analysis. R is a free software as a part of GNU projects as well as a powerful and useful tool for statistical analysis including Big Data. The study utilized R and SmartPLS, a representative statistical package of PLS-SEM, and analyzed internal consistency reliability, convergent validity, and discriminant validity of the measurement model. The study also analyzed path coefficients and moderator effects of the structural model and compared the results, respectively. The results indicated that R showed the same results with SmartPLS on the measurement model and the structural model. Therefore, the study confirmed that R could be a powerful tool that is alternative to a commercial statistical package in the future.

• Journal of Families and Better Life
• /
• v.24 no.5 s.83
• /
• pp.223-237
• /
• 2006

This study explores how well parents and their children recognize the social attitudes of one another. Mothers, fathers and youths were asked to state their own opinion on various social issues then predict their children's, fathers' and mothers' responses(attributed attitudes). Empirical evaluation of the possible socialization consequences of actual versus attributed attitudes leads to a series of hypotheses. The data were collected from single students at a university in Seoul and their parents. Included in the seven social attitude were sexuality, educational, economic, political, ecological, religious and family issues. Analysis of the responses 98-110 triads, each consisting a mother, a father and a young adult child showed that both mothers and fathers were limited in their ability to gauge the attitudes of their children. Guided by attribution theory, this study tested several hypothesized relationships between the actual response of mother, the actual response of the father, the perceived response of the mother, the perceived response of the father and the actual response of the child. The theoretical model was tested with AMOS 5.0, utilizing path analysis, which is a form of structural equation modeling with manifest variables. Overall model fit was assessed by examining GFI, NFI, TLI, CFI and RMR. Results of the data analysis can be summarized as follows. First, the children perceived their mothers and fathers to be highly similar in their opinions and the actual responses of the mothers and the fathers were considerably correlated. Second, the fathers' responses whether attributed or actual were more predictive than the mothers' responses to their children's opinions. The alternative model suggests considerable support for the attribution theory. Indeed, within a family, the actual opinions of parents appear to have little direct bearing on the child's orientations, except when the actual orientations are perceived and reinterpreted by the children. It is not what parents think, but what their children think they think that predicts their offsprings' attitudes.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.65-69
• /
• 2012

Environmental and health concerns over the lead have led to investigation of the alternative Pb-free solders to replace commonly used Pb-Sn solders in microelectronic packaging application. The leading candidates for lead-free solder alloys are presently the near eutectic Sn-Ag-Cu alloys. Therefore, extensive studies on reliability related with the composition have been reported. However, the insufficient drop property of the near eutectic Sn-Ag-Cu alloys has demanded solder compositions of low Ag content. In addition, the solder interconnections in automobile applications like a smart box require significantly improved vibration resistance. Therefore, this study investigated the effect of alloying elements (Ag, Bi, In) on the vibration fatigue strength. The vibration fatigue was conducted in 10~1000Hz frequency and 20Grms. The interface of the as-soldered cross section close to the Cu pad indicated the intermetallic compound ($Cu_6Sn_5$) regardless of solder composition. The type and thickness of IMC was not significantly changed after the vibration test. It indicates that no thermal activities occurred significantly during vibration. Furthermore, as a function of alloying composition, the vibration crack path was investigated with a focus on the IMCs. Vibration crack was initiated from the fillet surface of the heel for QFP parts and from the plating layer of chip parts. Regardless of the solder composition, the crack during a vibration test was propagated as same as that during a thermal fatigue test.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.101-110
• /
• 2014

The purpose of this research is to extend Ad-hoc network system lifetime with the proposed routing protocol which has considered hop lifetimes of the nodes while guaranteeing QoS in the establishment process of Ad-hoc network communication paths. Based on another power aware routing system that proposed in the advanced research [1], we are proposing an alternative power aware routing system in which nodes' hop lifetimes are compared in order to extend the lifetime of an Ad-hoc network system and delay factors have been considered for the assurance of QoS. The research of the routing protocol in this paper, which aims to maximize the system survival time considering power consumption status during the path searching in MANET and pursues the mechanism that controls hop delays for the same reason, can be applied to the study of WSN. The study concerning such phenomena is essential so that the proposed protocol has been simulated and verified with NS-2 in Linux system focusing on the lifetimes of the hops of the nodes. Commercialization of smart devices and arrival of the ubiquitous age has brought about the world where all the people and things are connected with networks. Since the proposed power aware method and the hop delay control mechanism used to find the adequate communication paths in MANET which mainly uses batteries or in WSN, they can largely contribute to the lifetime extension of the network system by reducing power consumptions when utilized for the communications attempts among soldiers during military operation, disaster areas, temporary events or exhibitions, mobile phone shadow areas, home networks, in-between vehicle communications and sense networks, etc. This paper presents the definitions and some advantages regarding the proposed outing protocol that sustain and extend the lifetime of the networks.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.1-11
• /
• 2007

The rapid growths of economy and automobiles since the 1970's have caused serious traffic jams and environmental disruption in urban areas. To relieve these problems caused by urbanization, there should be considered alternative means of transportation modes. Many developed countries have accepted bicycles as a so called "Green Mode" for environmentally oriented strategies to increase the qualities of urban lives. Korea have also attempted various means to raise bicycle usages. In this research, significant factors affecting bicycle crashes at signalized intersections in urban areas were studied. The model results showed that Poisson regression is the best fit methodology for data modeling and revealed that traffic volume, a number of driveways, configuration of the ground, presence of bicycle path, school, and bus stop, residential area, size of intersection are significant factors affecting the bicycle crashes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2010

In Wireless Sensor Network, transmission errors are frequently occurred due to the node failure, battery discharge, and interference by objects. Although Directed Diffusion has been considered as a prominent Data-centric routing algorithm, it revealed some weaknesses at this kind of unexpected network errors. In order to address the problem, we proposed a radio-aware routing algorithm for improving reliability of Directed Diffusion in Wireless Sensor Networks. The proposed algorithm is aware of the network status based on the radio information of MAC and PHY layers using a cross-layer approach. The link quality and the node failure information from the acquired network status were used to decide an alternative path to provide a reliable data transmission in error-prone sensor networks. The proposed algorithm showed its effectiveness of the data delivery rate and data ratio with several simulations consisting of various error rates and the number of nodes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1337-1344
• /
• 2014

The objective of an echo canceller connected to any end of a communication line such as digital subscriber line (DSL) is to compensate the outgoing transmit signal in the receiving path that the hybrid circuit leaks. The echo canceller working in a full duplex environment is an adaptive system driven by the local signal. Conventional echo canceller that implement the least mean square (LMS) algorithm provides a low computational burden but poor convergence properties. The length of the echo canceller will directly affect both the degree of performance and the convergence speed of the adaptation process. To cancel long time-varying echoes, the number of tap coefficients of a conventional echo canceller must be large, which decreases the convergence speed of the adaptive filter. This paper proposes an alternative technique for the echo cancellation in a telecommunication channel. The new technique employs the bi-directional least mean square (LMS) algorithm for adaptively computing the optimal set of the coefficients of the echo canceller, which is composed of weighted combination of both feedforward and feedback algorithms. Finally, Simulation results as well as mathematical analysis demonstrates that the proposed echo canceller has faster convergence speed than the conventional LMS echo canceller with nearly equivalent complexity of computation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.700-708
• /
• 2007

A midline deviation is divided into three types, such as a skeletal midline deviation, a dental midline deviation, and a combination. Among them, the midline deviation which appear in the early mixed dentition without any skeletal problem can be managed differently by the stage of dental development. The location of the permanent incisors can be improved without using artificial force in consideration of the condition of the space, the eruption timing or the eruption path of the adjacent permanent teeth in early mixed dentition, especially when the permanent incisors are erupting. Therefore, the space supervision technique, which can have the teeth align themselves utilizing physiologic events such as sequence or timing of the eruption of permanent teeth, can be an alternative to orthodontic movement. This case report describes midline deviation improvement by space supervision.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.5 no.1
• /
• pp.80-90
• /
• 2013

The purpose of the study was to compare the outplacement programs for the retiring employees in Korea corporations. We expect that this study will make contributions for increasing the quality of outplacement programs. We conducted the expert interviews and literature review and set a comparing criteria in terms of goal, target audience, program process and contents, operation process. We selected 6 different programs, which were KT, Samsung Electrounic, A consultancy firm specialized in outplacement, Korea labor foundation, and Korea international trade association. In results, we suggested the necessity of programs revision, the decrease of service recipient per a consultant, recommendation of alternative career path, and update of the programs for the service recipients who lacks of motivation. We also suggested that human resource department and chief executive officers made attentions for the outplacement programs as well as the government input more budget on the programs and consulting for the retirng employees.