• KIEAE Journal
• /
• v.10 no.3
• /
• pp.111-116
• /
• 2010

Ecological villages should be designed not only for simply reducing environmental impact such as energy saving and alternative energy use, resource conservation and circulation, harmony with surrounding environment and nature, but also for encouraging social contact and community activities with the residents, especially the aged people. The aim of this paper is to find the ecological and social design elements for the ecological village planning derived through case studies. The case studies are selected from the environmental Co-housings in Western America, surveyed in the years of 2008 and 2009. The results are as follows; 1. The ecological design elements, although there are some differences in size and type, were found to be basically applied in every ecological villages. 2. The community activities are actively conducted with the participation of the residents based on a variety of programs. The two main purposes of the community activities are strengthening the residents' familiarity with each other and the volunteer services to the local community where they belong.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.4 no.1
• /
• pp.59-65
• /
• 1967

Since the screw propellers were adopted as ship propulsion devices, the replacement of propeller shaft due to damage was mostly of fatigue failure due to the alternative stresses [1],[2]. To prevent such a failure, hence, it is suggested that careful attention should be paid to account of the alternative stresses on the design stage of the propeller shafts. In connection with this fact the Ship Classification Societies' Rules are regarded simply as guidance for preliminary determination of the shaft diameter. In this paper, limiting the topic to the small and medium-sized motor ships, an evaluation of the Rules formulae to a theoretical based on Soderberg's correlation [5] between the factor of safety and the resultant stresses obtained by application of the maximum shear theory is done. For this purpose eleven (11) ships built recently in Korea were taken as a species(refer to table 2. in text). In the end the following conclusions are made: (1) In general the Rules formulae give considerably larger size of the propeller shaft diameter than that derived from theoretical calculation, that is, about 7% more in AB and BV Rules, and about 20% more in LR and KR-NK Rules. (2) LR Rule gives the largest size of all, and AB Rule is mostly closed value to the theoretical. (3) The formular of the AB Rule is considered to be of the simplest in utilization and of the reasonable.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.922-929
• /
• 2014

Wind turbines are in the limelight in the alternative energy industry. However, they face frequent and various problems during operation. We focused on the supervising of the blades of a wind turbine. In this paper, we present the design of a maintenance robot that takes the size of wind turbine blades into consideration, so the general form of the robot is a square with four wires fixed to its vertices and to the nacelle. After the robot is placed near the nacelle, it moves along the blades. We also designed an attitude control algorithm for the robot to maintain its balance. Our control algorithm for the robot consists of roll and pitch attitude controllers and a height controller. Each controller was designed independently and then superposed together. We used simulations to verify our control algorithm.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.78-86
• /
• 2011

The world is suffered from severe environmental problems such as climate change and global warming due to radical industrialization after the Industrial Revolution. With advancement of science and information technologies, national borders have become meaningless. In this global trend, movable exhibition shall be supposed to pursue "Local in Global." Thus, movable exhibition should get involved in an effort to find a cultural identity in the globalization and to better our position among the various cultures. As an alternative, movable exhibition can be established by combining biomimicry, which is biomimicry of life by imitating biological system, with Flexibility of movable space. By providing a hint to environmental problems and cultural uncertainty, this alternative will generate an advanced exhibition trend that is more environmental-friendly and more efficient. As a cumulative concept created by the nature for 3.8 billion years, biomimicry has evolved a lot more than the modern science. By catching this point, "A study on flexibility of movable exhibition through biomimicry notion" is providing a revolutionary paradigm stepping beyond the current exhibition trend, which pursues coexistence of human beings and the nature and, at the same time, introduces our culture.

• Environmental and Resource Economics Review
• /
• v.15 no.3
• /
• pp.451-477
• /
• 2006

At the "Dissemination Stage", the newly configured technical design is compared with other alternatives to come up with the most desirable selection. The assessment conducted at this stage is not a simple procedure. It goes through the complex evaluation process in which various elements including economic effects and technical characteristics are considered. The reason for taking such a complex procedure is that the assessment, selection and application of the desirable technical alternative is critical for the company's competitive edge in every field of industrial sectors, thus influencing its survival and continuous growth. This study reviews the MAUT method for assessing technical alternatives of the thermal supply system design. And, to show the practical validity of the MAUT method, it is applied to the evaluation of thermal supply system alternatives in the field of energy supply system technology.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.33.1-33.10
• /
• 2017

Dental implants are a common treatment for the loss of teeth. This paper summarizes current knowledge on implant surfaces, immediate loading versus conventional loading, short implants, sinus lifting, and custom implants using three-dimensional printing. Most of the implant surface modifications showed good osseointegration results. Regarding biomolecular coatings, which have been recently developed and studied, good results were observed in animal experiments. Immediate loading had similar clinical outcomes compared to conventional loading and can be used as a successful treatment because it has the advantage of reducing treatment times and providing early function and aesthetics. Short implants showed similar clinical outcomes compared to standard implants. A variety of sinus augmentation techniques, grafting materials, and alternative techniques, such as tilted implants, zygomatic implants, and short implants, can be used. With the development of new technologies in three-dimension and computer-aided design/computer-aided manufacturing (CAD/CAM) customized implants can be used as an alternative to conventional implant designs. However, there are limitations due to the lack of long-term studies or clinical studies. A long-term clinical trial and a more predictive study are needed.

• Human Ecology Research
• /
• v.53 no.4
• /
• pp.447-461
• /
• 2015

This study developed an integrative curriculum design plan for Home Economics through a deliberation method. This study established a research framework to integrate the deliberation models of Schwab, Walker, and Reid that inherited the intellectual tradition of curriculum deliberation along with the practical reasoning process of Brown and Paolucci from a critical science perspective. The practical research problem was formulated as "What should be done to develop a Home Economics integrative curriculum?" To address this practical research problem, deliberation with deliberators of each small, medium, and large groups was processed for the development of integrative curriculum design plans. An initial proposal was developed from small group deliberation processes. An initial proposal was examined and an alternative plan was developed from medium group deliberation processes. An alternative plan and its consequence were re-examined from large group deliberation processes. The authors finalized a proposal organized on four valued ends of self-formation, intersubjectivity, social action, and life skills. A practical problem focused integrative curriculum was developed and proposed to pursue the four valued ends. The suggested final practical problem focused curriculum demonstrates the power of Home Economics to contribute to the advancement of individuals, families, and society as well as the practical empowerment of students.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.140-143
• /
• 1993

Station Blackout(SBO) event means the complete loss of alternating current(AC) electrical power to the essential & nonessential switchgear buses in a nuclear power plants. Since many safety systems in nuclear power plants depend upon alternative current power, the SBO event could be an important contributor to damage of reactor core. Therefore, the SBO events have been considered as a very important safety issues in a nuclear power plants. In this paper, as evaluating the design characteristics of offsite & emergency power systems, an acceptable minimum SBO duration is calculated. And it is presented that the design method for alternative AC(AAC) sources to cope with the SBO events.

• Advances in aircraft and spacecraft science
• /
• v.3 no.1
• /
• pp.29-43
• /
• 2016

Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.2
• /
• pp.96-105
• /
• 2001

R410a which is one of HFC refrigerants is being considered to be a promising replacement for R22 widely used in domestic air conditioners. The rolling piston type rotary compressors for R410a have lower energy efficiency than those for R22 because of the high pressure difference between a suction chamber and a discharge chamber in the compression mechanism. in addition, the re-expansion gas loss of the rotary compressor for R410a which occurs a ta clearance volume in a discharge port becomes larger than that for R22 due to high density of R410a refrigerant. Therefore, Pressure-Volume analyses for various design parameters of a discharge system were carried out to improve efficiency of a R410a rotary compressor. The results such as performance dta, over-compression loss, and re-expansion loss were acquired by P-V analyses and analyzed quantitatively. As a conclusion, the optimal specifications of several design parameters of a discharge system were obtained by analyzing P-V diagrams.