• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2002년도 제18차 공동학술강연회 자연저감고 지질학 (대한 자원 환경지질학회)
• /
• pp.81-100
• /
• 2002

While most of regulatory communities in abroad recognize ' 'natural attenuation " to include degradation, dispersion, dilution, sorption (including precipitation and transformation), and volatilization as governing Processes, regulators prefer "degradation" because this mechanism destroys the contaminant of concern. Unfortunately, true degradation only applies to organic contaminants and short- lived radionuclides, and leaves most metals and long-lived radionuclides. The natural attenuation Processes may reduce the potential risk Posed by site contaminants in three ways: (i)contaminants could be converted to a less toxic form througy destructive processes such as biodegradation or abiotic transformations; (ii) potential exposure levels may be reduced by lowering concentrations (dilution and dispersion); and (iii) contaminant mobility and bioavailability may be reduced by sorption to geomedia. In this review, authors will focus will focul on "sorption" among the natural attenuation processes of hazardous inorganic contaminants including radionuclides. Note though that sorption and transformation processes of inorganic contaminants in the natural setting could be influenced by biotic activities but our discussion would limit only to geochemical reactions involved in the natural attenuation. All of the geochemical reactions have been studied in-depth by numerous researchers for many years to understand "retardation" process of contaminants in the geomedia. The most common approach for estimating retardation is the determination of distrubution coefficiendts ($K_{d}$) of contaminants using parametric or mechanistic models. As typocally used in fate and contaminant transport calculations such as predictive models of the natural attenuation, the $K_{d}$ is defined as the ratio of the contaminant concentration in the surrounding aqueous solution when the system is at equilibrium. Unfortunately, generic or default $K_{d}$ values can result in significant error when used to predict contaminant migration rate and to select a site remediation alternative. Thus, to input the best $K_{d}$ value in the contaminant transport model, it is essential that important geochemical processes affecting the transport should be identified and understood. Precipitation/dissolution and adsorption/desorption are considered the most important geochemical processes affecting the interaction of inorganic and radionuclide contaminants with geomedia at the near and far field, respectively. Most of contaminants to be discussed in this presentation are relatively immobile, i.e., have very high $K_{d}$ values under natural geochemical environments. Unfortunately, the obvious containment in a source area may not be good enough to qualify as monitored natural attenuation site unless owner demonstrate the efficacy if institutional controls that were put in place to protect potential receptors. In this view, natural attenuation as a remedial alternative for some of sites contaminated by hazardous-inorganic components is regulatory and public acceptance issues rather than scientific issue.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.203-207
• /
• 2007

불산과 오존 세정 시 실리콘 웨이퍼 표면의 미세입자를 효과적으로 제거할 수 있는 세정 방법에 대하여 연구하였다. 불산의 농도가 0.3 vol% 이상이 되어야 미세입자가 제거 되었으며, 초음파가 인가된 오존수를 사용 시 제거 효율은 증가되었다. 오존과 불산 세정 단계 이후에 추가로 극미량의(0.01 vol%) 희석 암모니아수 세정을 하면 미세입자가 99%이상 제거됨을 확인하였다. 이는 암모니아수에 의한 웨이퍼 표면의 미세 에칭 효과와 알칼리 영역에서의 재흡착 방지 효과가 동시에 작용함에 기인된다고 보인다. 한편, 불산-오존-희석 암모니아수 세정은 통상의 SC-1 세정과 비교할 때 표면 미세 거칠기가 개선되는 경향을 보였다. 불산-오존-희석 암모니아수 세정은 상온에서도 미세입자를 효과적으로 제거할 수 있는 세정 방법으로, 고온 공정 및 과다한 화학액을 사용하는 기존 습식세정의 대안으로서 기대된다.

• 공업화학
• /
• 제17권2호
• /
• pp.125-131
• /
• 2006

디메틸에테르(이하 DME)는 환경에 친화적인 새로운 청정에너지이다. 또한 DME는 다양한 에너지원으로부터 제조 되어지며, 그 에너지원으로는 천연가스, 석탄, 바이오매스, 폐플라스틱 등이 있다. 이런 DME는 LPG와 매우 유사한 성질을 특징으로 가지고 있다. 이러한 결과로 DME는 LPG, 연료전지, 발전연료, 특히 디젤의 대체 연료로 고려되고 있으며, 2010년 대체 에너지로 기대되고 있다. DME 직접합성반응의 반응속도를 측정하기 위하여 서로 다른 조건인 온도 $220{\sim}280^{\circ}C$, 합성가스 비율 1.2~3.0에서 실험을 수행하였다. 모든 실험은 혼성촉매를 사용하여 수행하였으며, 혼성촉매는 메탄올 합성 촉매와 메탄올 탈수촉매가 포함되어 있다. 반응속도는 랭미어-힌쉘우드 타입의 반응 메커니즘을 따르며, 메탄올 합성반응, 메탄올 탈수반응, 수성가스 전환반응, 이 세 가지 반응의 메커니즘을 고려하였다. 각 반응의 반응속도는 촉매상의 표면반응과 수소와 메탄올, 그리고 물의 해리흡작으로 결정하였다.

• 유기물자원화
• /
• 제25권3호
• /
• pp.5-12
• /
• 2017

촉매오존화에 의한 메틸렌 블루(MB) 제거특성과 그에 미치는 운전변수의 영향을 관찰하기 위해 회분식 실험을 수행하였다. 촉매오존화에서 오존 분해반응의 촉매로 작용하는 활성탄의 투입량이 증가함에 따라 MB 및 TOC 제거속도가 증가하는 것으로 나타났다. 반응기로 공급되는 가스상 오존의 농도가 증가함에 따라 물질전달이 크게 일어나므로 MB 제거속도를 증가시키는 것으로 나타났다. 촉매오존화에서 오존의 분해에 의해 생성된 $OH{\cdot}$에 의해 MB의 분해가 일어나므로 오존화에 비해 MB의 제거속도가 빠를 뿐 아니라 훨씬 높은 TOC 제거율을 기대할 수 있는 것으로 나타났다. 촉매오존화에서 오염물질 처리는 pH의 변화에 큰 영향을 받지 않는 것으로 나타나 현장 적용시에 있을 수 있는 유입수의 변동에 대한 적용성이 높은 것으로 나타났다. 이러한 결과는 촉매오존화가 섬유산업에서 발생하는 난분해성 폐수를 처리하기 위한 효과적인 대안이 될 수 있음을 보여준다.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.37-40
• /
• 2014

This research investigates the quality changes during composting of bagasse and pig manure amended with 30% of surfactant-coated charcoal (SC). Two treatments, 30% uncoated charcoal (UC) amendment and no charcoal (NC) amendment, were done as control. Charcoal was coated with 0.37 mM tetradecyltrimethylammonium bromide (TDMA), a cationic surfactant, at the dosage of 10 g/L. At the end of the composting period, the carbon to nitrogen (C/N) ratio of SC amendment was 9.7; whereas, the C/N ratios of UC and NC amendment were 12.6 and 21.4, respectively. Plant nutrients contents of the compost produced from SC amendment were 20.7 mg $NH_4{^+}-N/g$, 42.8 mg $NO_3{^-}-N/g$, and 41.7 mg P/g. High nitrate and phosphate concentrations in SC amendment were due to the adsorption of these anions on the positive charge of TDMA. Desorption of plant nutrients retained in the compost pellets was also investigated. It was predicted that nitrate was fully desorbed from a pellet at 23 days for SC amendment, which was later than UC (14 days) and NC (10 days) amendment. A slow release of nitrate from the compost pellet will reduce the nitrate leaching into the environment. Thus, the adding of SC in the compost pile is one of the alternative methods to improve the quality of compost and plant nutrient retention.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.61-67
• /
• 1997

미생물에 의한 흡착법으로 중금속을 효과적으로 제거, 회수할 수 있다. 알콜 발효 후 부산물로 생성되는 폐 Saccharomyces cerevisiae는 비교적 가격이 저렴하고, 중금속 생체흡착에 유용한 자원으로 이용될 수 있다. 생체흡착 실험에 사용된 미생물은 부유 및 alginate에 고정화된 S. cerevisiae로 수행하였다. 회분식 실험에서 생체흡착량은 Pb > Cu > Cd의 순으로 이루어졌다. Pb 이온의 흡착 평형은 Freundlich와 Langinuir 모델로 설명하였고, Freundlich 모델이 실험자 료와 잘 부합되었다 고정화된 S. cerevisiae를 이용한 혼합용액( Pb, Cu, Cr 및 Cd )흡착 실험에서 각 중금속들은 선택적 흡착 특성을 나타내었다. 고정화 미생물을 고정층 반응기에 충진하여 혼합 중금속 용액의 생체흡착 실험을 수행한 결과 Pb 이온이 가장 많이 흡착을 하였다. 고정화된 미생물에 흡착된 Pb의 탈착실험에서 0.1M의 HCI 및 $H_2SO_4$가 효과적이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• 약학회지
• /
• 제54권6호
• /
• pp.429-440
• /
• 2010

HS-SPME-GC/MS was studied and optimized for the determination of 17 orgarnophosphorous pesiticides (OPPs: chlorpyrifos, chlorpyrifos-methyl, demeton-s-methyl, diazinon, dimethoate, EPN, fenitrothion, fenthion, malathion, methidathion, monocrotophos, parathion, phenthoate, phosphamidon, sulfotep, terbufos, triazophos) in blood. Optimum SPME parameters were selected: choice of SPME fiber (85 ${\mu}m$ polyacrylate), pH effect (0.5 N HCl), salt effect ($Na_2SO_4$, 0.2 g; 20%), headspace incubation temperature ($80^{\circ}C$), headspace incubation time (1 min), headspace adsorption time (30 min) and GC desorption time (2 min). These parameters were optimized using HS-SPME autosampler coupled with gas chromatography-mass spectrometry (GC-MS). Method validation was carried out in terms of linearity, limit of detection (LOD), limit of quantitation (LOQ) and recovery in blood. The assay was linear over 0.5~5.0 mg/l ($r^2$=0.955~1.000). Limit of detection (LOD) and limit of quantitation (LOQ) in blood were determined 0.03~0.3 mg/l (S/N=3) and 0.1~1.1 mg/l (S/N=10), respectively. Relative recovery with 0.5, 1 and 5 mg/l (in blood) were 90.8%, 98.5% and 94.1%, respectively. This method will be applied to the determination of the orgarnophosphorous pesticides in postmortem blood. The proposed protocol can be an attractive alternative to be used in routine toxicological analysis.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.133-145
• /
• 2017

Palm oil production is among the highest worldwide, and it has been mainly used in the food industry and other commodities. Currently, a lot of palm oil production has been destined for the synthesis of biodiesel; however, its use in applications other than the food industry has been questioned. Thereby for a sustainable development, in this paper the use of palm oil of low quality for corrosion inhibitors synthesis is proposed. The performance of the synthesized inhibitors was evaluated by using electrochemical techniques such as open circuit potential measurements, linear polarization resistance and electrochemical impedance spectroscopy. The results indicate that the fatty amides from palm oil are excellent corrosion inhibitors with protection efficiencies greater than 98%. Fatty amides molecules act as cathodic inhibitors decreasing the anodic dissolution of iron. When fatty amides are added, a rapid decrease in the corrosion rate occurs due to the rapid formation of a molecular film onto carbon steel surface. During the adsorption process of the inhibitor a self-organization of the hydrocarbon chains takes place forming a tightly packed hydrophobic film. These results demonstrate that the use of palm oil for the production of green inhibitors promises to be an excellent alternative for a sustainable use of the palm oil production.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1279-1284
• /
• 2012

Silica supported $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ catalyst was prepared through sol-gel method with ethyl silicate-40 as silicon resource and characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, nitrogen adsorption-desorption and potentiometric titration methods. The $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ particles with Keggin-type structure well dispersed on the surface of silica, and the catalyst exhibited high surface area and acidity. The catalytic performance of the catalysts for benzene liquid-phase nitration was examined with 65% nitric acid as nitrating agent, and the effects of various parameters were tested, which including temperature, time and amount of catalyst, reactants ratio, especially the recycle of catalyst was emphasized. Benzene was effectively nitrated to mononitro-benzene with high conversion (95%) in optimized conditions. Most importantly, the supported catalyst was proved has excellent stability in the nitration progress, and there were no any other organic solvent and sulfuric acid were used in the reaction system, so the liquid-phase nitration of benzene that we developed was an eco-friendly and attractive alternative for the commercial technology.