• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.44-48
• /
• 2017

We explain optical and electrical properties of top and bottom-emission structured alternating-current powder electroluminescent devices (ACPELDs) with Ga-doped ZnO(GZO) transparent electrode. The top-emission ACPELDs were layered as the metal electrode/dielectric layer/emission layer/top transparent electrode and the bottom-emission ACPELDs were structured as the bottom transparent electrode/emission layer/dielectric layer/metal electrode. The yellow-emitting ZnS:Mn, Cu phosphor and the barium titanate dielectric layers were layered through the screen printing method. The GZO transparent electrode was deposited by the sputtering, its sheet resistivity is $275{\Omega}/{\Box}$. The transparency at the yellow EL peak was 98 % for GZO. Regardless of EL structures, EL spectra of ACPELDs were exponentially increased with increasing voltages and they were linearly increased with increasing frequencies. It suggests that the EL mechanism was attributed to the impact ionization by charges injected from the interface between emitting phosphor layer and the transparent electrode. The top-emission structure obtained higher EL intensity than the bottom-structure. In addition, charge densities for sinusoidal applied voltages were measured through Sawyer-Tower method.

• ETRI Journal
• /
• 제43권1호
• /
• pp.120-132
• /
• 2021

A frequency diverse array (FDA) multiple-input multiple-output (MIMO) radar employs a small frequency increment across transmit elements to produce an angle-range-dependent beampattern for target angle and range detection. The joint angle and range estimation problem is a trilinear model. The traditional trilinear alternating least square (TALS) algorithm involves high computational load due to excessive iterations. We propose a fast-convergence trilinear decomposition (FC-TD) algorithm to jointly estimate FDA-MIMO radar target angle and range. We first use a propagator method to obtain coarse angle and range estimates in the data domain. Next, the coarse estimates are used as initialized parameters instead of the traditional TALS algorithm random initialization to reduce iterations and accelerate convergence. Finally, fine angle and range estimates are derived and automatically paired. Compared to the traditional TALS algorithm, the proposed FC-TD algorithm has lower computational complexity with no estimation performance degradation. Moreover, Cramer-Rao bounds are presented and simulation results are provided to validate the proposed FC-TD algorithm effectiveness.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.669-681
• /
• 2021

As the supply of xEV in Korea is rapidly increasing, the amount of waste batteries is expected to increase rapidly, but the current recycling system for waste xEV batteries is very insufficient. In order to properly utilize the xEV reusable battery module, it is essential to classify it into a type that has similar discharge characteristics to the current state of health(SOH), which is the discharge capacity of the battery. This paper proposes a system that can minimize the exchange of energy with the KEPCO system by using the charging/discharging method by circulating power between batteries in order to minimize the power consumption when charging and discharging waste batteries. In the proposed system, a function to measure parameters during the charging/discharging test of the waste battery was implemented to build a customized big date for the test waste battery. In addition, the dynamic characteristics of the proposed circuit were analyzed using PSIM, which is useful for power electronics analysis, and the validity of the proposed circuit was verified through experiments.

• 한국음향학회지
• /
• 제15권2호
• /
• pp.72-78
• /
• 1996

본 논문에서는 2차원 양방향 포물선 방정식 법과 푸리에 변환을 이용하여 3차원 굴절현상 및 3차원 후방 산란파를 포함하는 $2\frac12$차원 문제를 푸는 방법에 대해 다루었다. 여기서 $2\frac12$ 차원 문제란 2차원적 해양환경 하에 3차원적 음원이 존재할 경우를 의미한다. 2차원 양방향 포물선 방정식법은 수치기법으로 깊이 방향과 수평거리 방향에 대해 각각 Galerkin법과 Crank-Nicolson법을 사용하며 수직 불연속 경계면에 의한 후방 산란파를 포함한 수평거리 의존 문제에 대해 유용한 해를 제공한다. 2차원 해양환경에서는 파수 k가 종 또는 횡 수평거리 방향과 깊이 방향에 대한 함수이므로 3차원 Helmholtz방정식 법을 이용해 스펙트럴 해를 구하여 다시 푸리에 역변환하면 최종 해를 구할 수 있다. 본 연구방법의 정확성을 시험하기 위해서 계단형 해저면을 갖는 간단한 해양환경에서 계산을 수행해 보았으며 대한해협의 특정지역에서의 3차원적 음파전달 특성을 살펴보았다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.783-796
• /
• 2014

The coarse mesh finite difference (CMFD) method is applied to the discontinuous finite element method based discrete ordinate calculation for source convergence acceleration. The three-dimensional (3-D) DFEM-Sn code FEDONA is developed for general geometry applications as a framework for the CMFD implementation. Detailed methods for applying the CMFD acceleration are established, such as the method to acquire the coarse mesh flux and current by combining unstructured tetrahedron elements to rectangular coarse mesh geometry, and the alternating calculation method to exchange the updated flux information between the CMFD and DFEM-Sn. The partial current based CMFD (p-CMFD) is also implemented for comparison of the acceleration performance. The modified p-CMFD method is proposed to correct the weakness of the original p-CMFD formulation. The performance of CMFD acceleration is examined first for simple two-dimensional multigroup problems to investigate the effect of the problem and coarse mesh sizes. It is shown that smaller coarse meshes are more effective in the CMFD acceleration and the modified p-CMFD has similar effectiveness as the standard CMFD. The effectiveness of CMFD acceleration is then assessed for three-dimensional benchmark problems such as the IAEA (International Atomic Energy Agency) and C5G7MOX problems. It is demonstrated that a sufficiently converged solution is obtained within 7 outer iterations which would require 175 iterations with the normal DFEM-Sn calculations for the IAEA problem. It is claimed that the CMFD accelerated DFEM-Sn method can be effectively used in the practical eigenvalue calculations involving general geometries.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권3호
• /
• pp.241-249
• /
• 2006

Purpose For the reconstruction of craniofacial deformities, the distraction osteogenesis is an useful method which can make new soft tissues as well as new bone. Although the distraction osteogenesis is an effective procedure in quantitative aspects, the new bone formed by this procedure can be coarse in qualitive aspects sometimes. Materials and methods Twelve rabbits, weighing about 2 kg, were included and the prefabricated distraction device were used. After a latency period of 5 days, in the experimental group (n=6), the mandible was distracted at the rate of 1.0 mm/day for 2 days and then compressed with 1.0 mm for the next 3rd day, therefore distracted totally to a length of 1.0 mm for 3 days. This procedure was repeated 5 times and, as a result, the experimental group was distracted to a length of 5.0 mm for 15 days finally. In the control group (n=6), the mandible was distracted totally to a length of 5.0 mm at the rate of 1 mm/day. At 2 weeks and 8 weeks of consolidation in the control group, 3 rabbits in each group were sacrificed and their biopsy specimens from the distracted mandible were taken. Results All animals showed the mandibular elongation clinically and radiographically. Histologically, many blood vessels, osteoblasts and immature bones formed by osteoid deposition were observed in the experimental group at 2 weeks. At 8 weeks, the bony trabeculae were thicker than the ones in the control group and were composed of lamella bones and woven bones in the experimental group. On histomorphometric analysis, the bone deposition area of the distracted site was broader in the experimental group $(273.8{\pm}115.7\;cm^2)$ than the one in the control group $(199.4{\pm}101.4\;cm^2)$. Futhermore, the modified rate of bone deposition area was higher in the experimental group (48${\pm}$20%) than the one in the control group (35${\pm}$18%). However, these data showed no significant differences statistically. Conclusion These results suggest that the distraction osteogenesis by using an alternating distraction/compression protocols is an effective method for increasing new bone formation in distracted areas.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.464-470
• /
• 2010

고온, 고압에서 운용되고 있는 설비의 안전성을 평가하기 위해서는 사용시간 동안 열화된 역학물성을 정기적으로 점검하여야 한다. 비파괴적으로 열화된 설비의 역학적 특성을 점검하기 위하여 표면형 프로브(surface type probe)를 사용한 가역투자율 측정방법이 제시된다. 가역투자율 측정방법은 가역투자율이 자기 이력곡선의 미분값임에 근거하고 있다. 가역투자율은 교류 섭동 자기장의 주파수에 동조된 록-인 증폭기로 측정된 탐지코일에 유도된 전압의 제 1 고조파이다 가역투자율의 첨두값은 보자력 영역에서 나타난다. 실험에 사용된 강재는 12Cr 페라이트 내열강으로 $700^{\circ}C$의 등온에서 열처리 시간을 달리한 11개의 시편을 제작하였다. 가역투자율 첨두값 사이의 간격 (peak interval of reversible permeability: PIRP), 비커스 경도 및 인장강도는 열화가 진행됨에 따라 초기에는 급격하게, 후반에는 완만하게 감소하였다. PIRP가 감소함에 따라 인장강도와 비커스 경도가 선형적으로 감소하였고 이 상관관계를 이용하면 측정한 가역투자율로 12Cr 페라이트 내열강의 열화된 역학적 물성을 비파괴적으로 평가할 수 있다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.59-71
• /
• 2023

온실가스 감축과 탄소 중립의 실현을 위해서 탄소의 포집, 저장(carbon capture, and storage, CCS) 기술은 매우 중요하다. CCS는 CO₂ 저장을 중점적으로 함으로써, 포획된 CO₂를 지하 저류층 내부에 영구적으로 보관하는 역할을 한다. CO₂--EOR(enhanced oil recovery)은 CCS의 한 형태로, 오일 회수 촉진을 위해 CO₂를 지하 내부로 주입시켜 잔류 오일 회수에 도움을 줄 뿐만 아니라 CO₂가 지하에 저장되어 탄소 중립에도 기여하는 기술이다. 이 CO₂-EOR은 혼화공법과 비혼화공법으로 분류하며 혼화공법의 대표적인 방식인 CO₂-WAG(water alternating gas)는 물과 CO₂를 저류층 내부에 교대로 주입하여 오일을 생산하고 CO₂를 저장하는 공법이다. WAG 방식은 주입 유체의 돌파를 조절할 수 있어 오일 회수에 유리한 특징을 보이며, 흡입과 배출 과정 중에 상대투과도의 이력현상을 유도해 CO₂의 잔류 격리량을 확대할 수 있다. 본 연구에서는 CO₂-EOR 과정에서의 석유회수증진 효과와 CO₂가 지중에 저장되는 메커니즘을 설명하였으며, CCS와 연계한 CO₂-EOR 적용 사례를 소개하였다.

• 상하수도학회지
• /
• 제36권4호
• /
• pp.229-237
• /
• 2022

The sewer capacity design have been based on the Huff model or the rational equation in South Korea and often failed to determine optimal capacity, resulting in frequent urban flooding or over-sizing. A time distribution of rainfall (i.e., Huff or ABM method) could be used instead of a rainfall hyetograph obtained from statistical analysis of previous rainfalls. In this study, the Huff method and the ABM method, which predict the time distribution of rain intensity, which are widely used to calculate sewage pipe drainage capacity using the SWMM, were compared with the standard rainfall intensity hyetograph of Seoul. If the rainfall duration was 30 minutes to 180 minutes, the rainfall intensity value calculated by the Huff model tended to be less than the rainfall intensity value of the standard rainfall intensity in the initial 5-10 minutes. As a result, more than 10% to 30% of under-design would be made. In addition, the rainfall intensity value calculated by the Huff model from the section excluding the initial 5-10 minutes of rainfall to the rainfall duration was calculated larger than the value using the standard rainfall intensity equation, which would result in an over-design of 10% to 30%. In the case of a relatively long rainfall duration of 360 minutes (6 hours) to 1,440 minutes (24 hours), it showed an lower rainfall intensity of 60 to 90% in the early stages of rainfall, but the problem of under-design had been solved as the rainfall duration time had elapsed. On the other hand, in the alternating block method (ABM) method, it was found that the rainfall intensity at the entire period at each assumed rainfall duration accurately matched the standard rainfall intensity hyetograph of Seoul.

• 한국초등수학교육학회지
• /
• 제15권1호
• /
• pp.77-93
• /
• 2011

지수귀문도는 지금으로부터 약 300여년 전에 최석정이 <구수략>에서 소개한 마법육각진이다. 작금에 지수귀문도에 관심이 모아지고 있고, 마법수가 76부터 110 인 경우에 지수귀문도가 존재할 수 있다는 것이 증명되기는 했지만, 그것을 만드는 일반적인 방법은 아직도 알려지지 않았다. 현재까지는 컴퓨터를 이용하여 지수귀문도를 만드는 방법이 알려져 있을 뿐이다. 본 연구에서는 마법수가 88~92, 94~98 인 경우에 한정하여, 컴퓨터의 도움을 받지 않고, 초등학교에서도 문제해결 활동의 일환으로 지수귀문도를 만들 수 있는 방안으로 교호법을 제안한다. 이를 위해 교호법이 작동되는 수학적 이론을 소개하고, 그것을 이용해서 만들 수 있는 지수귀문도를 제시한다. 본 연구에서는 교호법을 통하여 초등학생들도 자신만의 지수귀문도를 만들 수 있을 것으로 기대한다.