• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2009

Typically, single-wafer wet etching is done by dispensing chemical onto the front and back side of spin wafer. The wafer is fixed by a number of chuck pins, which obstruct the chemical flow and would result in the incomplete removal of the remaining film, which can become a source of contamination in the next process. In this paper, we introduce a novel design of wafer chuck, in which chuck pins are groupped into two and each group of pins fixes the substrate alternatively. Two groups of chuck pins fix the high-speed spin substrate with non contact method using a magnetic material. The actual process has been executed to observe the effectiveness of this new wafer chuck. It was found that the new wafer chuck performed better than the conventional wafer chuck for removing the remaining film from the bevel and edge side of substrate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.943-946
• /
• 2004

We have investigated to observe the photoisomerization using the mixture solutions in chloroform and LB monolayers mixed with DPPA and BASH containing azobenzene group which has reversible to cis-trans by light irradiation.. Spreading solutions for the LB films were Prepared in chloroform($5.0{\times}10^{-5}mol/L$). We investigated the photoisomerization and property of the organic ultra thin film of fatty acid containing azobenzene was Prepared on the glass plate by LB method. As a result, the absorption spectra of 8A5H and DPPA mixture of LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipid into the monolayers, and the molecular high aggregation in pure azobenzene monolayers is also weakened by the introduction of phospholipid. We found that it was reversibly induced to cis-trans photoisomerization in a various mixture molar ratio.

• Korean Journal of Metals and Materials
• /
• v.50 no.5
• /
• pp.353-360
• /
• 2012

The corrosion product of archaeological iron objects is supposed to be removed because it causes re-corrosion. So far it is removed by scapel and sand blaster but they depend on the skill and experience of a conservator and the glass-dust of the sand blaster is harmful to humans. Therefore this study applies a laser cleaning system which is used in various industrial cleaning processes, to remove corrosion product from archaeological iron objects. In addition, this work studies the alternation of corrosion product after laser irradiation, which evaluates the reliability of the laser cleaning system. Optical microscopy, SEM-EDS, XRD, Raman have been used to observe and analyse the surface of the objects. The results show the capacity of laser cleaning some corrosion product, but blackening appears with increasing pulses and laser energy, and some corrosion products, goethite and hematite, are partially altered to magnetite. These problems, blackening and alternation of corrosion product, should be solved by further studies which find the optimal laser irradiation condition and use a wetting agent.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3543-3562
• /
• 2021

The methods and performance of a 3D pin-by-pin neutronics code based on the 2D/1D decoupling method are presented. The code was newly developed as an effort to achieve enhanced accuracy and high calculation performance that are sufficient for the use in practical nuclear design analyses. From the 3D diffusion-based finite difference method (FDM) formulation, decoupled planar formulations are established by treating pre-determined axial leakage as a source term. The decoupled axial problems are formulated with the radial leakage source term. To accelerate the pin-by-pin calculation, the two-level coarse mesh finite difference (CMFD) formulation, which consists of the multigroup node-wise CMFD and the two-group assembly-wise CMFD is implemented. To enhance the accuracy, both the discontinuity factor method and the super-homogenization (SPH) factor method are examined for pin-wise cross-section homogenization. The parallelization is achieved with the OpenMP package. The accuracy and performance of the pin-by-pin calculations are assessed with the VERA and APR1400 benchmark problems. It is demonstrated that pin-by-pin 2D/1D alternating calculations within the two-level 3D CMFD framework yield accurate solutions in about 30 s for the typical commercial core problems, on a parallel platform employing 32 threads.

• Microbiology and Biotechnology Letters
• /
• v.47 no.2
• /
• pp.317-322
• /
• 2019

Gastroenteritis with diarrhea is one of the most infectious diseases in the world following respiratory infections. Notably, diarrhea-causing viruses (DVs) cause more than 70% of such cases. In this study, 3,065 stool specimens from patients with diarrhea (median age, 1.1 years; range, 0.0-91.1 years), who were admitted to the DanKook University Hospital, were examined using multiplex reverse transcription PCR (mRT-PCR). The target viruses were astrovirus (AstV), enteric adenovirus (EAdV), group A rotavirus (RotV), norovirus GI (NoV-GI), and norovirus GII (NoV-GII). The mRT-PCR results were analyzed based on various factors such as seasonality, age, presence of co-infection, and analyzed trends. The detection rate of the DVs during the study period was found to be 30.8% (n = 943/3,065). When the detection rate was analyzed monthly, the DV detection rate was found to be highest between December to January. Of the detected DVs, NoV-GII was the most common, accounting for 45.5% of the detected viruses (n = 446/980). Notably, 86.5% (n = 848/980) of the pathogens were detected in individuals who were less than 5 years of age. During the study period, NoV-GII and RotV showed alternating trends. In addition, both the number and rate of co-infections increased.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.3
• /
• pp.21-25
• /
• 2007

Superconducting fault current limiter (SFCL) is attractive apparatus to reduce fault current in power grid. Since it is applied to the alternating current (AC) power line, the SFCL has losses in the normal operation. Recently, coated conductor (CC) is noticeable material employed for resistive bifilar winding type SFCL in many research groups. Bifilar structure is expected to have low AC loss by magnetic field offset as compared with the single tape structure in the same length. This paper reports about characteristic of bifilar pancake type coil for SFCL application in AC loss aspect. The bifilar coil is wound using CC with facing on HTS sides each other. Transport AC loss measurement and characteristic analysis of the bifilar coil using CC have been performed at 77K. The test results are compared with the Norris equations and the test results of non-inductively wound paralleled solenoid type coil which is suggested and tested in this group at present.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.197-207
• /
• 2006

In the coal-bearing formations of the Janggi Group, which are reported as typical clastic sediments, several beds of volcaniclastic rocks are actually found in the Yeongil area. The coal-bearing formations generally exhibit alternating lithologic characteristics of pyroclastic and epiclastic sedimentary facies. Tuff and tuffaceous sandstone rich in pumice fragments are characteristic in the coal-bearing fermations. Diagenetic minerals found in the pyroclastic rocks of the upper and lower coal-bearing formations are montmorillonite, clinoptilolite, opal-CT, and quartz. Several tuffaceous beds correspond to the low-grade ores of zeolites and bentonite, and moreover, these ores mostly occur as thin beds less than 1 m in thickness. Thus, the potential of altered tuffaceous rocks as the resources typical of zeolite and bentonite seems to be low. However, based on mineral composition and CEC determinations, it can be evaluated that these tuffaceous rocks mostly have the promising potential for utilization as the absorbent-functional mineral resources such as acid clays, if these low-grade ores plus adjacent tuffaceous rocks are collectively exploited.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.347-354
• /
• 2004

We report the petrographic and petrochemical results on the rocks which have been classified as hornfelsic sandstones or mudstones of the Gyeongsang Group in Wolseong Area, part of Choyang Geologic Sheet (Tateiwa, 1924) and discuss its origin. The rocks consist of alternating layers with dark. fine-grained and bright, coarse-grained but don't have any clues of thermal alteration such as hornfels. The rocks are composed of quartz, feldspar and rock fragments of volcanic origin. The overall geochemical characteristics of the rocks indicate that the rocks have mainly rhyolitic composition with 64.5-72 wt% SiO$_2$ and are similar to the trend of Cretaceous and Tertiary volcanic rocks around this area. On the contrary, the geochemical characteristics of rocks are distinguished from those of Lower Cretaceous Sindong and Mayans mudrocks in the Gyeongsang Basin. We re-name the rocks as rhyolitic tuffite.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.409-417
• /
• 2016

The purpose of this study was to demonstrate the effect on the degree of fatigue and accuracy of cardiopulmonary resuscitation according to the different time delays (3 minutes, 4 minutes). Carrying out repeated measures of variance (repeated ANOVA), we have shown that time effect (F = 7.835, p <.01) and group effect (F = 8.695, p<.01) and the interaction effect between time and group (F = 12.582, p<.001) were all statistically significant. It means, in the test of the main effect of group and time (3 minutes, 4 minutes) using the Bonferroni method, it turned out that the amount of lactic acid of the experimental group was larger than that of the control group (p<.01), and there was no difference until 3 minutes, but the difference of the amount of lactic acid was shown between before the experiment and after 4 minutes, and between 3 minutes and 4 minutes (p <.05), respectively. Then, in the result of the corresponding sample t-test, for comparing the according to the measurement time, the accuracy after 3 minutes became higher than the case of 4 minutes (t = 4.584, p <.001). Therefore, before 119 arrives performing cardiopulmonary resuscitation for emergency, rescuers need to perform cardiopulmonary resuscitation alternating with others before 3 minutes.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.59-65
• /
• 2012

The purpose of this study is to analyze the direction of slope sliding that occurred at the highland ${\bigcirc}{\bigcirc}$ district in the Samcheok coalfield, using geological and structural detail surveys. The study area is dominated by the Paleozoic Pyong-an Group, and sliding is concentrated in zones of alternating sandstone and shale beds in the Geumcheon and Jangsung Formations. Discontinuities in the area have a strike of NE-SW and dip at 30~$80^{\circ}$ to the NW and 40~$80^{\circ}$ to the SE. However, some have strikes of NW-SE. In slide area group 1 (P1 to P4), en echelon tension gashes were caused by shearing. The surface in the areas of group 2 (P5 to P7) and group 3 (P8 and P9) is marked by step-type tension cracks that formed due to extension. This phenomenon caused anticlockwise rotation of the sliding slope. Otherwise, the cutting of the road side through the eastern slope of the mountain contributed to surface sliding due to geographical equilibrium loss.