• Journal of Chest Surgery
• /
• v.8 no.2
• /
• pp.149-152
• /
• 1975

In spite of great advances in surgical treatment during past several decades, surgery of the trachea failed to develop correspondingly, partly because of relative rarity of the tracheal lesions and partly because of difficulties in surgical technique and anesthesia. Surgical diseases of the trachea are largely obstructions due to neoplasm or cicatrical stenosis and tracheal malacia. The present treatment of respiratory failure, using cuffed endotracheal and tracheostomy tubes, has produced, apparently with increasing frequency, tracheal stenosis, tracheomalized tracheal erosion. Surgery is presently the only reasonable way to treat stenotic lesions of the tracheobronchial tree. In the case of tumors, the current trend has been that of radical excision. Primary end-to--end reconstruction of the trachea has been generally recognized as the ideal method of repair following resection. However, for decades it was believed that a maximum of four tracheal rings only might be excised and primary healing achieved with safety. A great variety of procedures, developed by numerous investigations and directed at tracheal substitution, have almost invariably met with discouraging results. A meticulous study done by Grillo and associates on autopsy specimens has shown that an average 6.4cm of mediastinal trachea can be safely resected by full mobilization of the right lung and transplantation of the left main bronchus into the bronchus intermedius. Recently, we experienced a case of successful resection of a tumor of the tracheal carina and primary tracheo-left main bronchial anastomosis at the Department of Thoracic & Cardiovascular Surgery, the National Medical Center in Seoul. The patient, a 29-year-old man, was admitted to the hospital with complaints of dyspnea and cough. On admission, chest film showed hydropneumothorax on the right. After closed thoracostomy, hydropneumothorax disappeared, but hazy densities, developed in the right middle and lower lung fields, resisted to treatment. Bronchoscopy uncovered irregular tumor covering the carina and the right main bronchus, and biopsy indicated well differentiated squamous Cell carcinoma. Operation was performed on July 2, 1975. A right postero-lateral thoracotomy was used. Excision involved the lower trachea, the carina, the left main bronchus and the right lung. This was followed by direct anastomosis between the trachea and the left main bronchus. Bronchography was done on 17th postoperative day revealed good result of operation without stricture at the site ofanastomosis. About one month after the operation symptoms and signs of bronchial irritation with dyspnea developed, and these responded to respiratory care. On 82nd postoperative day, sudden dyspnea developed at night and the patient expired several hours later. Autopsy was not done and the cause of death was uncertain.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.544-551
• /
• 2008

QUAL2K enhanced QUAL2E and applied in real fields efficiently incorporates denitrification process, sediment-water interaction process, bottom algae and detritus. Also, the CBOD of QUAL2K is divided into two real parts, one is slow CBOD(sCBOD) and another is fast CBOD(fCBOD). The simulation results of QUAL2E and QUAL2K models in Anyang Stream were compared and analyzed in water quality constituents of DO, BOD, Org-N, NH$_3$-N, NO$_3$-N, Org-P, Dis-P and Chl-a respectively. The similar results were shown in Org-N, NH$_3$-N, Org-P and Chl-a both QUAL2K and QUAL2E models. But the different results were revealed in DO, BOD, Dis-P and NO$_3$-N by the influence of new incorporating processes. DO was shown relatively low values in the effect of bottom algae. BOD which is influenced by particulate organic matter was revealed high values. NO$_3$-N was closed to the real values by the two processes of denitrification and sediment-water interaction. To evaluate the running results of QUAL2K and QUAL2E models, a simple statistical analysis was conducted. According to the statistical analysis, QUAL2K represented less relative error and coefficient of variation than QUAL2E in almost all of constituents. It was found that QUAL2K, which simulates the water quality more realistically, can be applied to control and manage the water problems of river or river-run reservoir effectively.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.343-349
• /
• 2010

Rapid on-site sensing of nitrate-nitrogen and potassium ions in hydroponic solution would increase the efficiency of nutrient use for greenhouse crops cultivated in closed hydroponic systems while reducing the potential for environmental pollution in water and soil. Ion-selective electrodes (ISEs) are a promising approach because of their small size, rapid response, and the ability to directly measure the analyte. The capabilities of the ISEs for sensing nitrate and potassium in hydroponic solution can be affected by the presence of other ions such as calcium, magnesium, sulfate, sodium, and chloride in the solution itself. This study was conducted to investigate the applicability of two ISEs consisting of TDDA-NPOE and valinomycin-DOS PVC membranes for quantitative determinations of $NO_3$-N and K in hydroponic solution. Nine hydroponic solutions were prepared by diluting highly concentrated paprika hydroponic solution to provide a concentration range of 3 to 400 mg/L for $NO_3$-N and K. Two of the calibration curves relating membrane response and nutrient concentration provided coefficients of determination ($R^2$) > 0.98 and standard errors of calibration (SEC) of < 3.79 mV. The use of the direct potentiometry method, in conjunction with an one-point EMF compensation technique, was feasible for measuring $NO_3$-N and K in paprika hydroponic solution due to almost 1:1 relationships and high coefficients of determination ($R^2$ > 0.97) between the levels of $NO_3$-N and K obtained with the ion-selective electrodes and standard instruments. However, even though there were strong linear relationships ($R^2$ > 0.94) between the $NO_3$-N and K concentrations determined by the Gran's plot-based multiple standard addition method and by standard instruments, hydroponic $NO_3$-N concentrations measured with the ISEs, on average, were about 10% higher than those obtained with the automated analyzer whereas the K ISE predicted about 59% lower K than did the ICP spectrometer, probably due to no compensation for a difference between actual and expected concentrations of standard solutions directly prepared.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.334-341
• /
• 2011

This study was conducted to compare the characteristics of heat dissipated from LED lamps with water cooling method and natural cooling method in a closed-type plant production system (CPPS) and to determine the optimum water temperature and flow rate for LED lamps with water cooling method. The experiments were performed in CPPS maintained at temperature of $24^{\circ}C$ and humidity of 70%. As compared to the LED lamps operated at water temperature of $22.5{\pm}1.2^{\circ}C$ and flow rate of $1,521{\pm}3.3\;mL{\cdot}min^{-1}$, air temperature under LED lamps with natural cooling was approximately increased by $1^{\circ}C$ and photosynthetic photon flux was decreased by $10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. PPF illuminated from LED lamps was affected by forward voltage varied by the surface temperature of LED lamps. Forward voltage of LED lamps was decreased with increasing surface temperature and then PPF was proportionately decreased. Five levels ($14^{\circ}C,\;17^{\circ}C,\;20^{\circ}C,\;23^{\circ}C,\;26^{\circ}C$) of water temperature and three levels ($500\;mL{\cdot}min^{-1}$, $1,000\;mL{\cdot}min^{-1}$, $1,500\;mL{\cdot}min^{-1}$) of flow rate were provided to analyze the change of surface temperature and heat exchange of LED lamps. Heat exchange was increased with decreasing water temperature and increasing flow rate. At flow rate of $1,000-1,500\;mL{\cdot}min^{-1}$ and water temperature of 22.0-$22.6^{\circ}C$, surface temperature of LED lamps can be approached to $24^{\circ}C$ that was almost same as air temperature in CPPS. The calorific value generated from LED lamps used in the study was estimated to be $103.0\;kJ{\cdot}h^{-1}$.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.369-378
• /
• 1991

Major statutory nature protection areas include Nature Parks, Nature Reserves. Nature Ecological System Protected Areas. Biosphere Reserves, Nature Protected Forests, Wildlife Sanctuaries, and Protection Forests with total area of 1,124,000 ha. These protected areas cover almost 18% of the forested area. The number of visitors of NPs reached over 33 million per year with sharp increasing rate over the years. To protect the deteriorated hiking trails and camp grounds caused by overuse, two management policies have been implemented : cooking prohibition and natural rest rotation system. While prohibition of cooking is based on the fact that most of the solid wastes in nature parks are leftovers of cooking, natural rest rotation system is mainly for rehabilitation of deteriorated areas by natural processes. The system has closed 47 trails(in 27 mountains) throughout the country since January 1991, which is scheduled to continue 3 years. Due to the lack of accumulated scientific knowledge on how, when and where to close, application of the system leaves much to be desired. This paper discusses the current efforts to protect the natural resources for recreational use and suggests future directions for an effective policy implementation.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.3
• /
• pp.205-211
• /
• 2012

BACKGROUND: Generally, nitrogen (N) fertilization higher than the recommended dose is applied during vegetable cultivation to increase productivity. But higher N fertilization also increases the concentrations of nitrate ions and nitrous oxide in soil. In this experiment, the impact of N fertilization was studied on nitrous oxide ($N_2O$) emission to standardize the optimum fertilization level for minimizing $N_2O$ emission as well as increasing crop productivity. Herein, we developed $N_2O$ emission inventory for upland soil region during red pepper and Chinese milk vetch cultivation. METHODS AND RESULTS: Nitrogen fertilizers were applied at different rates to study their effect on $N_2O$ emission during red pepper and Chinese milk vetch cultivation. The gas samples were collected by static closed chamber method and $N_2O$ concentration was measured by gas chromatography. The total $N_2O$ flux was steadily increased due to increasing N fertilization level, though the overall pattern of $N_2O$ emission dynamics was same. Application of N fertilization higher than the recommended dose increased the values of both seasonal $N_2O$ flux (94.5% for Chinese cabbage and 30.7% for red pepper) and $N_2O$ emission per unit crop yield (77.9% for Chinese cabbage and 23.2% for red pepper). Nitrous oxide inventory revealed that the $N_2O$ emission due to unit amount of N application from short-duration vegetable field in fall (autumn) season (6.36 kg/ha) was almost 70% higher than that during summer season. CONCLUSION: Application of excess N-fertilizers increased seasonal $N_2O$ flux especially the $N_2O$ flux per unit yield during both Chinese cabbage and red pepper cultivation. This suggested that the higher N fertilization than the recommended dose actually facilitates $N_2O$ emission than boosting plant productivity. The $N_2O$ inventory for upland farming in temperate region like Korea revealed that $N_2O$ flux due to unit amount of N-fertilizer application for Chinese cabbage in fall (autumn) season was comparatively higher than that of summer vegetables like red pepper. Therefore, the judicious N fertilization following recommended dose is required to suppress $N_2O$ emission with high vegetable productivity in upland soils.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.22-30
• /
• 1995

Responses of Pospam-injected chestnut and pine trees to drill wound were examined. Pospam was injected into the stem by just filling up the drill wound in September 10, 1993. The diameter of the injection wound were 0.5 and 1cm. DBH of chestnut trees and pine trees injected were 10, 15, 20 and 10, 20, 30cm, respectively. The results of tree response were examined in June, 1994. None of them showed any symptom of decay by the time. However, sapwood under the bark was remarkably discolored. The discoloration was more severe in 1cm-injection wound than in 0.5cm one. The severity of discoloration was not differed between species and among DBH applied. The sapwood split was longer in 1cm-injection wounded trees than in 0.5cm trees and longer in chestnut trees than in pine trees. From the split, callus grew out and almost closed the splits. In the trunk injection tested, the damage was mare severe in 1cm injection wound of chestnut trees than in any other combination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.112-117
• /
• 2017

Interest in the development of renewable energy sources has been increasing over the past 10 years and the west coast of Korea is one of the most favorable regions for tidal power. Barrage type tidal power is representative of the experience of installation and operation of such power sources for long periods. However, future projects for barrage type energy sources are either delayed or closed due to their environmental impact. For this reason, we applied a new tidal power technology with minimized environmental impact to a candidate area in the west coast and then analyzed its feasibility. The new tidal power technology is called Dynamic Tidal Power (DTP). Because its verification is impossible both in the laboratory and field, a numerical model is used for the evaluation of DTP. This new technology produces tidal power by means of the phase difference caused by diffraction on both sides of a dike built tens of km away from the coast. Because DTP is theoretically able to almost double the tidal range, it is expected to be applicable to even a small tidal area. Unlike the barrage type, it has the advantage of reducing the environmental impact by not enclosing the sea water. The west coast of Korea is close to the metropolitan area and has a high tidal range and, thus, it is thought to be a suitable candidate for tidal power.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.235-244
• /
• 2006

Granite cores were sampled within Korea Atomic Energy Research Institute and cyclic loadings up to 1550 cycles were applied. Microcrack development in samples due to cyclic loading was estimated using Acoustic Emission(AE) method. AE showed two different types depending on numbers of cycle. Type 1 appeared at low cycles and had low energy and diverse frequencies, while type 2 appeared at high cycles and had high energy and uniform frequency. AE property of type 1 indicates voids and pre-existing microcracks in samples may close or propagate up to certain length. Microcracks may be sheared or closed during loading and are recovered from shear or opened during unloading when AE of type 2 were measured. P wave velocities and Felicity ratios were measured at 50, 150, 350, 750, 1550 cycles. P wave velocities were almost the same regardless of number of cycles applied. However, Felicity ratios were much lower than 0.9, indicating that microcracks were developed within samples. This result indicates that Felicity ratio is a better tool than P wave velocity to estimate the damage of rock.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.128-134
• /
• 2014

Recently, design and construction of street tunnels tend to focus on cost reduction and preservation of nature. Accordingly, research is actively being carried out to quickly detect fires when they occur in tunnels, which have partially closed structures. Among such research, fire detection methods using optical fiber sensors have a wide bandwidth and fast transmission speed, while using light as a medium. Therefore, it does not receive electrical interference and there is almost no loss of information during transmission, while also having little noise as well. In relation to this, a fire monitoring system that can accurately detect the location of fires in real time using shape memory alloy and optical cables was developed in this study. In order to verify the developed method, light loss measurement test was conducted according to indoor temperature changes, while also conducting fire simulation tests by installing test beds in common underground zones with different external environments of temperature and distance. Upon carrying out experiments, the fire monitoring system developed in this study was found to be able to detect fires in long distance sections in real time.