• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.513-519
• /
• 2013

Line scan camera has been widely used in the area of inspection of glass, film, fabric, iron, PCB and etc. due to the high resolution and the high speed. We developed the line scan based vision system to inspect tangled and cut-off status of yarn in the manufacturing process. The original image is binarized with a proper threshold, and the gap distances in the yarn are measured in real time, so finally the status of the process is decided by the maximum value of the gap distance. All procedures are executed in real time by realization of multi-processed threads. By implementation of this system, the error of the yarn in manufacturing process can be precedently monitored and the loss of the yarn is decreased efficiently.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.1008-1012
• /
• 2014

Tunnel bracket is used in railway tunnel area in order to maintain insulation. Insulator performance evaluation test is proceeded refer to IEC 61109 but it is impossible to reflect all the field condition where insulator installed. Korea has clear four season in climatic condition and peninsula with lots of mountain in geomorphology condition. Tunnel bracket material which used in korea are butyl rubber, polymer and silicone. Most of them were installed without any internal climatic and geomorphology condition. According to the KORAIL operation data most of the insulator break down occurs in tunnel. So interval of inspection period is shorter then any other insulator and lots of maintenance cost incurs. Most major railway advanced country such as germany and japan maintain tunnel bracket with their own experience. For example visual inspection carried out with in one or two years and detailed inspection carried out between three to five years. This paper analyzed materials and shapes of tunnel bracket to in order to find optimized one in korea peninsula. Proposed bracket were tested under regulation and experience field data. Finally it was installed at the field and evaluated until now.

• Journal of Labour Economics
• /
• v.34 no.3
• /
• pp.29-58
• /
• 2011

Using careful background research and methodology, we proposed a revised sectoral index of vulnerability that is directly applied to two central labor examples: working hours and minimum wages. The valued calculated by each specific index represent the degree of weakness in corresponding conditions at the level of workplace units. Our proposed vulnerability index promises to be applicable to all business units under labor spot inspection. Also, it can be easily updated as the business environment evolves. The index is useful in selecting certain groups of business units and in evaluating the effectiveness of each regional government office.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.3
• /
• pp.215-220
• /
• 2015

As a nondestructive inspection technology currently in use, infrared thermography has gradually expanded its application range to industry. The method detects only defect areas by grafting ultrasound on a technique of detecting infrared energy emitted from all objects with absolute temperature of 0 K and converting this energy into thermography for inspection. Ultrasound infrared thermography has merits including the ability to inspect a wide area in a short time without contacting the target object. This study investigated the applicability of the technique for defect detection using variable ultrasound excitation inspection methods on samples of Terfenol-D, a magnetostrictive material with a tunable natural resonant frequency.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.69-80
• /
• 2006

Interest about baby health increased into promise of all life health on society. Prevention disease or treatment about baby health is important, but it is important that first of grasping baby state through correct diagnosis. In this paper, diagnosis method for baby ocular inspection of Oriental medicine applying image processing technology is presented. For this, extracting baby frontal face image based on skin color, five sensory organs extraction and extraction of myeongdang based on position information is proposed. Finally, usefulness of method Proposed by an experiment world prove.

• Composites Research
• /
• v.31 no.5
• /
• pp.246-250
• /
• 2018

In this paper, laser ultrasonic rotation scanning method was proposed to inspect and visualize defects in corner section of curved composite structure. L-shaped composite specimen with defects in its corner section were inspected using laser ultrasonic rotation scanning method. L-shaped specimens had artificial defects at three different depths to simulate delamination damage. All artificial defects were detected clearly in different time-of-flight according to their depths. Inspection result showed that the proposed method is suitable to inspect round corner section of curved composite structure without any special tools.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1103-1107
• /
• 2016

The automatic tensioning device of the catenary system constantly maintains the tension of the trolley wire by absorbing the variations due to the elasticity of the line caused by temperature variation. The tension plays an important role in affecting the electric motorcar operation directly. This paper suggests the methodology of the life cycle extension and the maintenance of the automatic tensioning device by means of performance diagnosis of the pulley type automatic tensioning device which has been commonly used for the electric railway system. Through conducting performance diagnosis and comparative test for the wornout pulley type automatic tensioning device by replacing the components such as the bearing and the bearing shaft without replacing all the assembly, the tensioning device is analyzed whether it is properly functioned. Provided that the maintenance regulation is reinforced so as to implement the bearing replacement through periodical precise inspection along with random check-up inspection which is now carried out by the operating organizations, it is ensured that the life cycle extension and the reduction of maintenance cost of the tensioning device could be achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.631-632
• /
• 2006

The assembly of camera lens modules fur the mobile phone has not been automated so far. They are still assembled manually because of high precision of all parts and hard-to-recognize lens by vision camera. In addition, the very short life cycle of the camera phone lens requires flexible and intelligent automation. This study proposes a fast and accurate identification system of the parts by distributing the camera for 4 degree of freedom assembly robot system. Single or multi-cameras can be installed according to the part's image capture and processing mode. It has an agile structure which enables adaptation with the minimal job change. The framework is proposed and the experimental result is shown to prove the effectiveness.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.41-47
• /
• 2002

Until now, there is a tendency of most textile research focused on the certain specific area of textiles in profound. This paper based on the case study of inspection of manufacturing men's formal wear has been investigated in the relationship between defection of men's formal wear and mechanical properties of textile for fall and winter. As a results of implementing Pearson's Correlation, density, blend rate, bending property, the rate of silk blend, the formality of sewing are correlated with defection of men's formal wear. However, it is required the defection of classification standard in various types of the finished product in a further study. In addition to increase efficiency of production in the manufacture, it is necessary for scholars to investigate the direction of research according to the contingency approach based on the systems approach.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.239-262
• /
• 2010

Tube Lines has carried out a "knowledge and investigation programme" on the deep tube tunnels comprising the Jubilee, Northern and Piccadilly lines, as required by the PPP contract with London Underground. Many of the tunnels have been in use for over 100 years, so this assessment was considered essential to the future safe functioning of the system. This programme has involved a number of generic investigations which guide the assessment methodology and the analysis of some 5,000 individual structures. A significant amount of investigation has been carried out, including ultrasonic thickness measurement, detection of brickwork laminations using radar, stress measurement using magnetic techniques, determination of soil parameters using CPT, pressuremeter and laboratory testing, installation of piezometers, material and tunnel segment testing, and trialling of remote photographic techniques for inspection of large tunnels and shafts. Vibrating wire, potentiometer, electro level, optical and fibre-optic monitoring has been used, and laser measurement and laser scanning has been employed to measure tunnel circularity. It is considered that there is scope for considerable improvements in non-destructive testing technology for structural assessment in particular, and some ideas are offered as a "wish-list". Assessment reports have now been produced for all assets forming Tube Lines' deep tube tunnel network. For assets which are non-compliant with London Underground standards, the risk to the operating railway has to be maintained as low as reasonably practicable (ALARP) using enhanced inspection and monitoring, or repair where required. Monitoring techniques have developed greatly during recent years and further advances will continue to support the economic whole life asset management of infrastructure networks.