• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.77-78
• /
• 2020

An alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS) based alkali-activated material (AAM). The compressive strength and porosity were measured, and (SEM-EDX) were used to study the hydration mechanism and microstructure. Results indicated that the composition of alkali solutions was significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength. Further increase in WGP dissolution led to strength loss, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite also appeared to improve the strength which contributed to develop C-S-H-type hydration.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.124.1-124.1
• /
• 2016

In this work, uniform thickness and good adhesion of electrodeposited copper layer were achieved on AZ91 Mg alloy in alkaline noncyanide copper solution containing pyrophosphate ion by employing appropriate zincate pretreatment. Without zincate pretreatment, the electrodeposited copper layer on AZ91 Mg alloy was porous and showed poor adhesion which was explained by small number of nucleation sites of copper due to rapid dissolution of the magnesium substrate in the pyrophosphate solution. The zincate pretreatment was found as one of the most important steps that can form a conducting layer to cover AZ91 surface which decreased the dissolution rate of AZ91 Mg alloy about 40 times in the copper pyrophosphate solution. Electrodeposited copper layer on AZ91 Mg alloy after an appropriate zincate pretreatment showed good adhesion and uniform thickness with bright surface appearance, independent of the deposition time but the surface roughness of the electrodeposited copper layer increased with increasing Cu deposition time.

• 약학회지
• /
• 제53권5호
• /
• pp.235-240
• /
• 2009

The interaction of cadmium (II) ion with quercetin was investigated in aqueous solution at different pH. The quercetin/cadmium stochiometries for cadmium (II) binding have been determined by UV-vis spectrophotometric method. The complexation of Cd(II) ion with 54.72 ${\mu}M$ quercetin (A=1.00793) was formed in 0.2 M $NH_3-0.2$ M $NH_4Cl$ (pH 8.0) buffer solution. 1:1 Cd(II)-complex had a maximum absorbance and showed the bathochromic shift of the long-wavelength band of the UV-vis spectra in the alkaline pH when interacted with quercetin in buffer solution. These results suggest that Cd(II)-quercetin complex has the optimal condition of chelation in basic buffer solution.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.60-67
• /
• 1995

This study was made to investigate the effect of silk fabrics treated with mimosa and tannic acid-weighting effect, surface color according to temprature, treatment time, concentration, pH. The results were as follows ; 1. The wavelength of maximum absorption of mimosa and tannic acid solution appeared at 278.5nm and 275.0nm, respectively. By the irradiation, spectra at wavelength of maximum absorption of mimosa solution disappeared, but those of tannic acid solution decreased after 48hr irradiation. 2. The tannin weighting increased with the increase of concentration, treatment temperature at 8$0^{\circ}C$, acidic condition. In case of tannic acid, it was higher than mimosa. 3. Surface color of silk fabric with mimosa changed from 2.8YR to 5.8YR acc-ording to the increase o( tannin concentration but in case of tannic acid itchanged from 4.2Y to 3.9Y. It was more changed acidic or alkaline conditionthan origine solution.

• KSBB Journal
• /
• 제10권4호
• /
• pp.386-392
• /
• 1995

The high viscous ${\gamma}$-polyglutamic acid(${\gamma}$-PGA) from alkalophilic Alcaligenes sp. was purified and its solution property was investigated. The intrinsic viscosities for Na+ form and H+ form of ${\gamma}$-PGA were 31.1 and 0.38d$\ell$/g, respectively. The viscosity of H+-PGA was not influenced by pH or salts while that of Na+-PGA was influenced. The intrinsic viscosity of Na+-PGA solution decreased remarkably at the alkaline or acidic pH and showed the sharp decrease when salts were added. ${\gamma}$-PGA exhibited the property of the polyelectrolyte showing the .sharp decrease of intrinsic viscosity by the addition of NaCl, and intrinsic viscosity of dilute solution with the low concentration of NaCl was exponentially dependent on temperature and its temperature dependency increased with increasing NaCl concentration. The chain stiffness, coil overlap parameter and critical concentration of Na+-PGA were 0.08, 5.25 and 0.07g/d$\ell$, respectively.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.322-326
• /
• 2010

수소발생용으로 사용되는 $NaBH_4$ 수용액의 저장과정 중에 $NaBH_4$ 안정성에 대해 연구하였다. $NaBH_4$의 안정성을 증가시키기 위해 NaOH와 KOH를 사용하였으며, $NaBH_4$의 저장 중 가수분해반응에 미치는 알칼리와 $NaBH_4$ 농도, 온도 그리고 저장 용기 재질의 영향을 실험하였다. 알칼리농도가 증가할수록 $NaBH_4$가 수용액 중에서 안정화되기 때문에 수소발생 속도가 감소하였다. $NaBH_4$ 농도를 10에서 15 wt%로 증가시켰을 때 안정성이 감소하다 15 wt% 이상으로 농도를 증가시켰을 때는 pH의 증가에 의해 안정성이 증가하였다. $NaBH_4$ 농도를 25 wt%, NaOH 3.0 wt%일 때 수소발생 활성화 에너지 값은 115.1 kJ/mol 로 촉매를 사용했을 때보다 활성화 에너지 값이 1.5~4.0배 높았다. 유리나 스텐리스-스틸에 저장된 $NaBH_4$ 용액의 안정성이 플라스틱에 저장된 $NaBH_4$ 용액의 안정성보다 더 높았다.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.243-252
• /
• 2019

The pitting corrosion and inhibition studies of AZ31B magnesium alloy were investigated in the alkaline solution (pH12) with chloride and inhibitors. The corrosion behavior of passive film with/without Cl^- in the alkaline electrolyte were conducted by polarization curve and immersion tests in the presence of various additives (inhibitors) to clarify the inhibition efficiency of pitting corrosion at higher potential region. Critical concentration of pitting corrosion for Mg alloy was evaluated with 0.005 M NaCl in 0.01 M NaOH on the anodic polarization behavior. Critical pitting of AZ31B Mg alloy in 0.01 M NaOH is a function of chlorides; E_pit = - 1.36 - 0.2 log [Cl^-]. When the Sodium Benzoate (SB) was only used as an inhibitor, a few metastable pits developed on the Mg surface by an immersion test despite no pitting corrosion on the polarization curve meaning that adsorption of SB on the surface is insufficient protection from pitting corrosion in the presence of chloride. The role of SB and Sodium Dodecylbenzenesulfonate (SDBS) inhibitors for the Mg alloy surface in the presence of chloride was suppressed from pitting corrosion to co-adsorb on the Mg alloy surface with strong formation of passive film preventing pitting corrosion.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.56-64
• /
• 2013

In order to examine the availability of color developing for prepared persimmon extract powder dyes, purified and freeze-dried powder from immature persimmon fruit. The cotton fabrics dyed with 1% concentration of powder dyes. This study was conducted to examine into the color developing effects of the powder dye for the dyed cotton fabrics irradiated with xenon light. Powder dye is difficult to dissolve in water resulting in a colloidal and viscous solution. The problem of solubility in water was resolved by setting the dyeing conditions by wetting the dye with alcohol in advance and dissolving in warm water($50{\sim}60^{\circ}C$). Samples had no alkaline conversion in making process of powder dyes showed high color developing effect(${\Delta}E^*$, K/S). Samples showed decreased ${\Delta}E^*$, K/S with increased alkaline conversion in making process of powder dyes. Samples that had alkaline effects displayed easy early color developing to be advantageous in the process of natural pattern in art work.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.184-190
• /
• 2011

The membrane properties (membrane resistance and ion exchange capacity) of the five types of commercial anion exchange membrane, i.e. IOMAC, AHT, APS, AHA, AFN, were evaluated for the application in the alkaline electrolysis. The membrane resistance decreased in the order; in 1M KOH: AHT>IOMAC>AHA>AFN>APS; in 1M NaOH: AHT>IOMAC>AHA>APS>AFN. The ion exchange capacity decreased in the order: AFN>APS>AHT>AHA>IOMAC. The membrane life was determined from the change of membrane resistance in 1M KOH and NaOH with an increase of soaking time in 20 wt% KOH and 30 wt% NaOH solution. AHA membrane had a good membrane life in 20 wt% NaOH with its unchanged membrane resistance. And, AFN and AHA membrane had a good membrane life in 30 wt% NaOH with its unchanged membrane resistance.

• 한국광물학회지
• /
• 제5권2호
• /
• pp.61-71
• /
• 1992

화산 유리질 암석인 진주암을 대상으로 60-150${\circ}C$의 온도 범위에서 다양한 농도의 알칼리 용액으로 수열 처리하므로서, 유리질 성분의 변질 양상 및 제올라이트의 합성 과정을 폐쇄계의 조건에서 연구하였다. 진주암을 속성 기원 제올라이트의 생성 환경에 해당되는 80${\circ}C$ 및 pH=8-12의 조건에서 100일간 처리하여도, 양간의 단순 용해 양상이 인지될 뿐 제올라이트는 합성되지 않았다. 여기서 처리 용액의 pH가 증가함에 따라, Si과 Al의 농도는 점진적으로 증가되지만 Si/Al의 농도비는 감소하는 경향을 나타내었다. 진주암을 0.1M 이상의 NaOH 용액으로 수열 처리하여 Na-P, 아날심, 체바자이트, Na-X와 같은 제올라이트를 합성하였다. 대개 100${\circ}C$를 경계로 60-100${\circ}C$의 온도 범위에서 Na-P, 그리고 100-150${\circ}C$에서 아날심이 주로 합성되었다. Na-P의 합성 과정에서 시료에 대한 용액의 혼합 조성비가 낮은 경우(<10ml/g)에 체바자이트, 그리고 처리 용액의 NaOH 농도가 높을 경우 (>3M)에 Na-X가 Na-P에 수반되어 생성되는 양상을 볼 수 있다. 제올라이트 합성 과정에 있어서 진주암질 유리의 알칼리 용액에 의한 변질은 화산 유리의 속성 변질에 의한 천연 제올라이트 생성 과정과 같은 용해${\cdot}$변질 반응(incongruent dissolution)의 형식으로 진행되는 것으로 해석된다. 그러나 반응 속도론적인 측면에서 보면, 이 실험으로부터 도출된 제올라이트의 합성 조건들은 화산 유리의 속성 변질에 의한 천연 제올라이트 생성 조건의 해석에 직접 적용될 수 없을 것으로 생각된다.