• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1333-1338
• /
• 2014

LDHs(layered double hydroxides) are of use adsorbent to remove heavy metals, micro-organic pollutants as well as high concentration of phosphorus from wastewater to low concentration of surface water without pH adjustments. This study examined the generation condition of LDHs saturated with phosphorus. Less than 20% regeneration rate was obtained in the absence of alkali and regeneration solution. After the desorption of LDHs with several conditions of acid and alkali solution, more than 60% of regeneration rate could be expected in the case of using $MgCl_2$ as regeneration solution.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.268-277
• /
• 2004

process (ACP), electrochemical properties of high heat-generating alkali and alkali earth oxides in molten salt were measured and the behavior of those elements were analyzed. The reduction potentials of Cs, Sr, and Ba in a molten LiCl-$Li_2O$ system were more cathodic than that of Li and closely located one another. Thus, it is expected that the alkali and alkali earth would not hinder the reaction mechanism which is via lithium reduction. Alkali and alkali earth metals are likely to recycle into molten salt when the process is operated beyond metal reduction potentials and the effect of electric current on the mass transport is also determined by measuring the metal concentrations in the molten salt phase at different current conditions.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1250-1252
• /
• 2013

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.619-620
• /
• 2008

• International Journal of Concrete Structures and Materials
• /
• v.9 no.3
• /
• pp.283-294
• /
• 2015

In the present study, a porous concrete with alkali activated slag (AAS) and coal bottom ash was developed and the effect of carbonation on the physical property, microstructural characteristic, and heavy metal leaching behavior of the porous concrete were investigated. Independent variables, such as the type of the alkali activator and binder, the amount of paste, and $CO_2$ concentration, were considered. The experimental test results showed that the measured void ratio and compressive strength of the carbonated porous concrete exceeded minimum level stated in ACI 522 for general porous concrete. A new quantitative TG analysis for evaluating $CO_2$ uptake in AAS was proposed, and the result showed that the $CO_2$ uptake in AAS paste was approximately twice as high as that in OPC paste. The leached concentrations of heavy metals from carbonated porous concrete were below the relevant environmental criteria.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3979-3990
• /
• 2011

Eight ionizable nano-baskets of cone 25,26-di(carboxymethoxy)calix[4]arene-crown-3,4,5,6 were synthesized and were verified by $^1H$ and $^{13}C$ NMR spectroscopy, IR spectroscopy and elemental analysis. The competitive solvent extractions of alkali and alkaline earth metal cations were studied using such nano-baskets. The novelty of this study is including three binding units of calixarene's bowl, crown ether's ring and electron-donor ionizable moieties in a unique scaffold to assess the binding tendency towards the cations. The objective of this work is to study the extraction efficiency, selectivity and $pH_{1/2}$ of such complexes. The result of solvent extraction experiments indicated that these compounds were effective extractants of alkali and alkaline earth metal cations. Their selectivities were greatly influenced by the acidity of solution and the conformations of the calixcrown. One conformer was selective to $Na^+$ in pH ${\geq}$ 4, while the other was highly selective to $Ba^{2+}$ in pH 6 and upper.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.43-50
• /
• 1996

The adsorption charateristics of lead(II) ions on Aspergillus niger and Rhizopus arrhizus were investigated. Adsorption amount of A. niger and R. arrhizus was about 95 mg/g and 25 mg/g, respectively. These biomass was approached to adsorption equilibrium within reaction time of 1hr because of their high reactivity. The uptake of lead ion by A. niger was less sensitivity than it by R. arrhizus on the inhibition effect of alkali metals and the decreasing ratio of uptake of lead ion of A. niger and R. arrhizus by inhibition effect of alkali metals was 37% and 50%, respectively. In pre-treatment on these biomass, NaOH treatment was contributed high adsorption capacity to these biomass. Then, adsorption amount of A. niger and R. allhizus was increased about 25 mg/g and 10 mg/g, respectively. In isotherm for the adsorption of lead ion based on Freundlich equation, 1/n value of A. niger and R. ar고izus was calculated the range of 0.28-0.56 and 0.44-0.67, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.316-324
• /
• 2009

Carbon based sorbents for $CO_2$ adsorption were prepared by impregnation with alkali metals ($Li^+$, $K^+$) and alkaline earth metals ($Ca^{2+}$, $Mg^{2+}$). BET surface area of test sorbents was lower than the intrinsic activated carbon. In particular, impregnation of $Ca^{2+}$ or $Mg^{2+}$ resulted in lower surface area of specific adsorption sites than that of $Li^+$ or $K^+$. While the adsorption capacity for $CO_2$ was high in the sorbents containing $Ca^{2+}$ and $Mg^{2+}$, strong interaction with $CO_2$ would cause to drop the capacity after regeneration. The adsorption was found high relatively in the flow with a high concentration of $CO_2$ and in a low flow rate. The adsorption isotherm for the present modified AC sorbents fits well with the Freundlich model.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.22-28
• /
• 2000

A study on the recovery of gallium from zinc residues is carried out by alkali leaching using NaOH. The results show that in case of alkali leaching of zinc residues, Zn, K and Si are mainly leached out and Fe and other base metals are scarcely leached out, which results in that gallium is easily recovered by solvent extraction. The leaching efficiency of gallium increases with increasing alkali concentration and solid density. Especially, alkali consumption is considerably reduced by washing the zinc residues with water before leaching in order to eleminate the soluble zinc compounds. The gallium from zinc residues is found to be leached out with a recovery of 80% or higher for 2hrs leaching with 1~1.25 M/L NaOH solution and solid density 333 g/L at $25^{\circ}C$.