• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.545-549
• /
• 1993

an alignment system in the X-and Y-directions an X-Y-.theta. stage driven by piezoelectric actuators is presented. A pair of quadruple gratings and a quadruple photo-detector are used. The difference between the two 0-th order moire signals in reflection with a relative spatial phase of 180.deg. is used in each direction to control the alignment of the X-Y-.theta. stage. The stage is aligned at the position where the difference is zero. The quadruple gratings are 10 mm * 10 mm, and of a binary square-type with a 1/2 duty cycle. Their pitches are 16 .mu.m. Alignment accuracy of .+-.20nm was obtained in this system.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.138-142
• /
• 2010

The thrust axis alignment of the launch vehicle is very important because of the misalignment causes the unstable attitude control and results in mission failure. Generally, optical methods such as digital theodolite and laser tracker and mechanical method such as turn table method are used to align thrust axis to vehicle axis. This article deals with the simple method of thrust axis alignment of Kick Motor.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.3
• /
• pp.11-38
• /
• 1986

Past and present developments in the alignment procedures of the line shafting are discussed. It is shown that the effects of the propeller hydrodynamics and of the oil-films, built up in the journal bearings, can essentially change the static alignment. However, the inclusion of these phenomena in the alignment is not yet standard. Also the dynamic effects of natural frequencies and vibratory excitations are not yet accounted for in the general case, although also these aspects can influence the safe operation of the line shafting. Therefore a plea is made to develop a more complete and thus a more rational alignment procedure.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.219-224
• /
• 2004

In recent years, as the demands of VBNS(Very high speed Backbone Network Service) and VDSL(Very high-data rate Digital Subscriber Line) increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, WDM elements increase. The alignment and the attachment technology are very important to fabricate the optical elements for communication. In this paper, the mechanism of rotational stage, the contact sensing unit, and integrated control circuit for the optical alignment system are studied.

• The Mathematical Education
• /
• v.45 no.4 s.115
• /
• pp.507-518
• /
• 2006

There is a great need to find new topics which are good to evaluate and to encourage the mathematical creativity of gifted students, For the purpose to find such a topic, we study Ho-bak-go-nu game that is one of Korean traditional games and a typical alignment game. By analyzing patterns of possible alignment, the author gives a complete solution to win or not to lose according to the rules chosen by players. The author also poses several class-models including a test for the class of gifted students based on the analysis of real classes on Ho-bak-go-nu game.

• Research in Mathematical Education
• /
• v.23 no.3
• /
• pp.149-164
• /
• 2020

This study aimed to establish an observation protocol for mathematical modeling as an alternative way to examine instructional alignment to the Common Core State Standards for Mathematics. The instructional alignment observation protocol (IAOP) for mathematical modeling was established through careful reviews on the fidelity of implementation (FOI) framework and prior studies on mathematical modeling. I shared the initial version of the IAOP including 15 items across the structural and instructional critical components as the FOI framework suggested. Thus, the IAOP covers what teachers should do and know for practices of mathematical modeling in classrooms and what teachers and students are expected to do. Based on the findings in this study, validity and reliability of the IAOP should be evaluated in follow-up studies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.483-486
• /
• 2002

Toggle bolt is mechanical device constructed with toggle spring wing toggle and machine screw, and defined as an expansive bolt consisting of a nut with flanged wings which are pressed to the bolt and, after insertion in a thin or hollow wall, spread open through spring pressure, thus anchoring it to the wall. And spring wing toggle is aligned with two wings, spring and nut manually in domestic manufacturing line. Then it is regarded as major problem for exports increasement to make cost down in the view of total manufacturing process. Accordingly in this study, high speed type automatic alignment mechanism is guided for spring wing bolt, and exclusive alignment dies and some special additional units are designed and manufactured.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.87-91
• /
• 2003

Effects of the circular and non-circular pad shapes on self-alignment in BGA soldering are predicted using Surface Evolver, and the calculated results are compared with experimental data. While the pad shape has minor effects on self-alignment in the vertical direction, self-alignment in the lateral direction depends on the pad direction and length ratio of the non-circular pad. Larger restoring force is obtained in the minor-axis direction than the major-axis direction, which suggests a possibility of reducing misalignment in the specific direction. The restoring force of the circular pad is between those of the non-circular pad in the major and minor-axis directions. The calculated results of Surface Evolver show reasonably good agreements with experimental data using the shear loading system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1926-1927
• /
• 2011

In this paper, an alignment method between a transporter and a stowage is presented for the automation of loading and unloading operations in the mobile harbor system. The principle of linetracer is utilized for the automatic alignment of transporter and stowage, and the effectiveness of the alignment method is proved by a simulated experiment using mobile robot.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.31.1-31.1
• /
• 2011

In this study, we investigated alignment state estimation performances of the three methods i.e. merit function regression (MFR), differential wavefront sampling (DWS) and Multiple Design Configuration Optimization (MDCO). The three target optical systems are 1) a two-mirror Cassegrain system for deep space Earth observation, 2) intermediate size three-mirror anastigmat for Earth ocean monitoring, and 3) extremely large segmented optical system for astronomical observation. We ran alignment state estimation simulation for several alignment perturbation cases including 1mm to 10mm in decenter and from 0.1 to 1 degree in tilt perturbation error for the two-mirror Cassegrain system. In general, we note that MDCO shows more competitive estimation performance than MFR and DWS. The computational concept, case definition and the simulation results are discussed with implications to future works.